08-10-2019, 10:52 AM | #1 |
Drives: '22 Summit White ZL1 A10 Join Date: Aug 2019
Location: Virginia
Posts: 459
|
Fender Attachment Question
Noted this on the drivers side front fender attachment point.....poor paint match on the bolt, but more concerned with the wallered out hole.....poor choice of tool for alignment of the fender after delivery at the dealership?
Any thoughts as to what may have happened here? Last edited by Firecaptain; 08-24-2019 at 11:51 AM. Reason: Updated link on pic |
08-11-2019, 09:32 PM | #2 |
Drives: '22 Summit White ZL1 A10 Join Date: Aug 2019
Location: Virginia
Posts: 459
|
OK......so no guesses as to what may have happened here.....any suggestions for a do it yourself non body shop repair?
Think a bolt, nut and 2 washers can flatten that out? Thanks |
08-11-2019, 10:14 PM | #3 |
Drives: 2017 SS 1LE, 2017 Volt, 2013 Pilot Join Date: May 2014
Location: Colorado
Posts: 4,274
|
pics might help get a response.
__________________
2017 SS 1LE | HBM | Vortech V3-Si supercharger (620RWHP and 575ft lbs) | PDR | Black Bowties | Illuminated Front Black Bowtie | Illuminated Door Sills | Smoked Tails | vented seats mod
|
08-16-2019, 06:46 AM | #4 |
Drives: '22 Summit White ZL1 A10 Join Date: Aug 2019
Location: Virginia
Posts: 459
|
|
08-16-2019, 06:55 AM | #5 |
|
I tried to view the direct link from the pic and I don't have permissions to view. So I cant see it either.
|
08-16-2019, 06:57 AM | #6 |
Drives: '22 Summit White ZL1 A10 Join Date: Aug 2019
Location: Virginia
Posts: 459
|
Last edited by Firecaptain; 08-24-2019 at 11:52 AM. Reason: Updated picture link |
08-16-2019, 07:01 AM | #7 |
Drives: 2016 2SS Join Date: Aug 2016
Location: Ohio
Posts: 68
|
Link does not work
|
08-24-2019, 11:53 AM | #8 |
Drives: '22 Summit White ZL1 A10 Join Date: Aug 2019
Location: Virginia
Posts: 459
|
Think I finally got this picture link issue taken care of......back to the original question......thoughts about what went on here?
Last edited by Firecaptain; 08-24-2019 at 12:08 PM. Reason: re-introduce post since pic link is fixed....hopefully |
08-24-2019, 12:41 PM | #9 |
Thank you Al Oppenheiser!
Drives: Red Hot A10 ZL1 Convertible Join Date: Jun 2017
Location: Sarasota, FL
Posts: 4,988
|
Nope.
Go advanced and use the paperclip to upload it. Linking to 3rd party sites will often |
08-24-2019, 02:34 PM | #10 |
Drives: 2023 GMC 1500 Join Date: Jul 2019
Location: Arkansas
Posts: 156
|
We still can't see any pics
__________________
XDJSW8
TPW 9/2/2019 Delivered 10/25/2019 Traded Feb 2022 for a C7 |
08-25-2019, 10:21 AM | #11 |
Drives: '22 Summit White ZL1 A10 Join Date: Aug 2019
Location: Virginia
Posts: 459
|
DANG!......I hosted the pic in my album HERE on this site......UNCLE!....lol https://www.camaro6.com/forums/pictu...ctureid=163109 Last edited by Firecaptain; 08-25-2019 at 10:21 AM. Reason: Update pic address |
08-25-2019, 10:23 AM | #12 |
Drives: '22 Summit White ZL1 A10 Join Date: Aug 2019
Location: Virginia
Posts: 459
|
8th time might be the charm.....
|
08-25-2019, 10:31 AM | #13 |
Drives: 2019 ZL-1 Join Date: Feb 2009
Location: Troy, MI & Naples, FL
Posts: 2,019
|
I see the pics. No idea on what that means- did u buy it new? I would GUESS the fender has been adjusted. Maybe replaced?
__________________
2019 ZL-1 Acquired 4/23/21 at 6300 miles. Riverside Blue, A10, PDR. Traded in 2017 2SS with 6M and 32k miles. Continental Extreme Contact Sports. Now has 10,000 miles...
2012 Yukon XL Denali w/ 6.2 AWD |
08-25-2019, 01:09 PM | #14 |
Drives: 2018 NGM ZL1 Join Date: Jul 2018
Location: Buffalo
Posts: 145
|
My Z also looks like this on both fenders. I always assumed a manufacturing defect and just ignored it since I am not showing the car any where.
|
|
|
Post Reply
|
|
|