10-28-2017, 09:15 AM | #1 |
Drives: 2019 Red Hot ZL1 1LE: 2012 RAM 2500 Join Date: Mar 2012
Location: DeRidder, LA
Posts: 711
|
RX Catch can
I have an RX Catch Can that came off my 2010 1LT, I thought that I could use this on my 17 SS but it is rather hard to find a hard point to mount it up to so I will let it go for $100.00 plus shipping, there are no hoses.
|
10-28-2017, 12:03 PM | #2 |
Drives: 16 2SS 6MT NPP MRC / 15 K1300S Join Date: Mar 2016
Location: NW of Austin
Posts: 1,034
|
Take that bracket off and it should bolt right up to that radiator fan flange more on the passenger side.
__________________
Rohana RFX-5 10/11, M/T 275/305, Eibachs, Hellwigs, Hurst SS, DMS LT4 SC 596HP/589TQ, DMS Low-side, Kooks 2LTs, MBRP Race, Rotofab, MMS CC |
10-28-2017, 12:16 PM | #3 |
Drives: 2019 Red Hot ZL1 1LE: 2012 RAM 2500 Join Date: Mar 2012
Location: DeRidder, LA
Posts: 711
|
I can give it a shot when I get home, I actually did take the bracket off and I still couldn't find a place to mount it too but I will give another shot, I hate to get rid of it for the fact that its a lot bigger than most.
|
10-28-2017, 03:46 PM | #4 |
Drives: 2019 Red Hot ZL1 1LE: 2012 RAM 2500 Join Date: Mar 2012
Location: DeRidder, LA
Posts: 711
|
I don't see how its going to fit, the can is 3X6 inches by its self, unless you have a pic of where it would it would go.
|
10-28-2017, 05:08 PM | #5 |
Drives: 16 2SS 6MT NPP MRC / 15 K1300S Join Date: Mar 2016
Location: NW of Austin
Posts: 1,034
|
There is a flat bracket that offsets the centerline of my can toward the passenger side a bit from the flat mounting spot, but here is the location:
__________________
Rohana RFX-5 10/11, M/T 275/305, Eibachs, Hellwigs, Hurst SS, DMS LT4 SC 596HP/589TQ, DMS Low-side, Kooks 2LTs, MBRP Race, Rotofab, MMS CC |
10-28-2017, 05:48 PM | #6 |
Drives: 2019 Red Hot ZL1 1LE: 2012 RAM 2500 Join Date: Mar 2012
Location: DeRidder, LA
Posts: 711
|
I see what you are talking about, I went out and if I turn the bracket on its side then the can will fit so now I need to get some hose and a couple of quick disconnects and route the hose but keep the original tube just in case, thanks for the help so I guess I will keep the can.
|
10-28-2017, 09:32 PM | #7 | |
Drives: 16 2SS 6MT NPP MRC / 15 K1300S Join Date: Mar 2016
Location: NW of Austin
Posts: 1,034
|
Quote:
__________________
Rohana RFX-5 10/11, M/T 275/305, Eibachs, Hellwigs, Hurst SS, DMS LT4 SC 596HP/589TQ, DMS Low-side, Kooks 2LTs, MBRP Race, Rotofab, MMS CC |
|
|
|
Post Reply
|
Thread Tools | |
|
|