03-28-2020, 09:25 PM | #1 |
Drives: 2010 Camaro SS M6 Join Date: Apr 2016
Location: Huntingdon
Posts: 120
|
MAF SENSOR
Where can I get a strong MAF sensor?? Anyone have a lead on one??
|
03-28-2020, 11:02 PM | #2 |
SomeguyK
Drives: 2010 Black 2SS/RS Join Date: Nov 2014
Location: FL
Posts: 1,947
|
If you that worried about it just buy a new Ac Delco one from a dealership or vendor.
__________________
TMS 427, Dart iron Block, Forged assembly, Frankenstien heads, AGP TT 62/62 BB turbo's, AGP/Fore triple fuel system, Tilton clutch, Holley 1 7/8 shorties, Technostalgia tail lights,Oracle, Aeroforce, MGW shifter,Flowmaster, Pegasus subframe bushings,BMR trailing & toe arms,Z28 UCA bushings,Zl1 rear sway bar,Prothane,BMR,Goodridge brake lines,Ridetech HQ coilovers,3.91,Trutrac,billet caps,DSS axles,HE offest,built TR6060,1LE diffuser,Havoc spoiler,SSclones,20in MRR 017, Pirelli P Zero, Nitto NT555RII
More to come. |
03-28-2020, 11:11 PM | #3 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,574
|
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
03-28-2020, 11:14 PM | #4 |
|
I'de replace the one you have with the exact same so you keep the tune correct.
__________________
|
03-29-2020, 10:30 AM | #5 |
Drives: 2010 Camaro SS M6 Join Date: Apr 2016
Location: Huntingdon
Posts: 120
|
It has a strong sensor in it, I just remember hearing there were a couple different sensors out there and wanted to know if anyone exclusively sold the strong sensor or if I search the part number on mine that it would be a direct replacement. Mine went out of curve this week, I cleaned it yesterday and it functioned properly. Just wanted to get a line on one just in case.
|
03-29-2020, 02:58 PM | #6 |
SomeguyK
Drives: 2010 Black 2SS/RS Join Date: Nov 2014
Location: FL
Posts: 1,947
|
There's only one sensor....the factory one. They are all the "strong" sensor now. There was a so called "weak" or bad batch during the first years of production.
__________________
TMS 427, Dart iron Block, Forged assembly, Frankenstien heads, AGP TT 62/62 BB turbo's, AGP/Fore triple fuel system, Tilton clutch, Holley 1 7/8 shorties, Technostalgia tail lights,Oracle, Aeroforce, MGW shifter,Flowmaster, Pegasus subframe bushings,BMR trailing & toe arms,Z28 UCA bushings,Zl1 rear sway bar,Prothane,BMR,Goodridge brake lines,Ridetech HQ coilovers,3.91,Trutrac,billet caps,DSS axles,HE offest,built TR6060,1LE diffuser,Havoc spoiler,SSclones,20in MRR 017, Pirelli P Zero, Nitto NT555RII
More to come. |
03-29-2020, 03:16 PM | #7 |
Drives: 2013 ZL1 A6 Camaro Join Date: Jun 2013
Location: Florida
Posts: 171
|
No such thing as a strong or weak MAF. They just read slightly higher or lower in hertz and do nothing for power.
|
03-29-2020, 05:38 PM | #8 |
SomeguyK
Drives: 2010 Black 2SS/RS Join Date: Nov 2014
Location: FL
Posts: 1,947
|
While I agree there isn't such a thing. A MAF that reads incorrectly can affect drivability. Same with adjusting MAF scaling while tuning.
__________________
TMS 427, Dart iron Block, Forged assembly, Frankenstien heads, AGP TT 62/62 BB turbo's, AGP/Fore triple fuel system, Tilton clutch, Holley 1 7/8 shorties, Technostalgia tail lights,Oracle, Aeroforce, MGW shifter,Flowmaster, Pegasus subframe bushings,BMR trailing & toe arms,Z28 UCA bushings,Zl1 rear sway bar,Prothane,BMR,Goodridge brake lines,Ridetech HQ coilovers,3.91,Trutrac,billet caps,DSS axles,HE offest,built TR6060,1LE diffuser,Havoc spoiler,SSclones,20in MRR 017, Pirelli P Zero, Nitto NT555RII
More to come. |
03-29-2020, 09:40 PM | #9 |
Drives: 2010 Camaro SS M6 Join Date: Apr 2016
Location: Huntingdon
Posts: 120
|
|
03-30-2020, 03:54 AM | #10 |
We don’t run MAF sensors in Australia, they get removed blanked off and tuned out. Not sure why but just about all tuners do a MAF less tune.
|
|
|
|
|
|