01-14-2022, 09:32 AM | #1 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Anyone tried interior painting or painted parts?
Looking for ideas on colors for the interior. I like the yellow hertz rental trim part with led still exposed. I took the carbon off because i could see a tad bit of the silver showing.
I cant decide to paint it black, yellow or red.. black is the go to.. yellow matches car red matched seat belts and interior stich. If it did red or yellow I would consider doing the console around my carbon fiber and lower dash the glove box and below wheel in a straight line across. maybe something in the back seat but not much. Any ideas..
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
01-15-2022, 12:16 AM | #2 |
Drives: 2016 2SS Join Date: Mar 2019
Location: The 805 (central coast cali)
Posts: 111
|
I’m going for the yellow door trim pieces like the hertz version.
Kind of expensive but I switched out the paddle shifters for yellow ones. Looks great and OEM
__________________
2016 Camaro 2SS A8 MRC NPP Sunroof. Addons: Stainless Works Redline axle back exhaust, Chevrolet cold air intake, C7 sideskirts/front splitter, Diode dynamics side markers
|
01-15-2022, 09:28 AM | #3 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,616
|
A small thing, but looking at your first photo, you may want to paint the plastichrome bezel around the cluster. I covered it in black plastidip, no more glare and looks OEM, see below.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
01-15-2022, 10:14 AM | #4 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Info on how to pull off that looks great
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
01-15-2022, 11:18 AM | #5 |
Thank you Al Oppenheiser!
Drives: Red Hot A10 ZL1 Convertible Join Date: Jun 2017
Location: Sarasota, FL
Posts: 4,975
|
Nice work, arpad_m.
Matte-ing out that bezel glare on a vert would be awesome! |
01-15-2022, 12:34 PM | #6 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,616
|
Thanks guys. They come off easily by gently pulling away from the dash, down and towards yourself, starting at the top end. They're only held in place by small plastic clips, see my 2nd pic.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
01-15-2022, 12:59 PM | #7 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Thanks I got them off..
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
01-15-2022, 01:03 PM | #8 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Just can't figure out the color
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
01-15-2022, 01:36 PM | #9 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Is this touch I've seen some porches, ferrari, lambo, and pagani similiar..
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
01-16-2022, 12:48 PM | #10 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Chicken out and went w red.. I think yellow would of been good but no yellow on interior. If it had yellow sticking it been perfect
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
01-17-2022, 03:30 PM | #11 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Finally safe enough to install lights back into frame. Should have panels back on in a few.
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
01-17-2022, 06:29 PM | #12 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Sorry it got dark one is no flash the other are w flash on.
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
01-17-2022, 07:34 PM | #13 |
Drives: 2020 SS 1LE Join Date: Aug 2020
Location: NorCal
Posts: 658
|
Glad you went with red. Yellow would’ve been a bit much. IMO, those Ferraris are way overdone!
How did the paint come out? Any tips? Looks really good. I’ve been considering something similar on my car… just want to break up this sea of black. |
01-17-2022, 09:19 PM | #14 | |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Quote:
*Sand all parts w 400 *Use SEM prep spray or acetone w lint free cloth to clean *Adhesion promoter spray *Tack cloth very light so not to leave residue of tack on part *Primer several light coats 10 min apart *wait 30 minutes to wet sand if needed or applying the. color of your choice *spraymax 2k paint with hardener or regular enamel paint then follow up with 2k gloss or matter with the hardener either way I think it's best to use a paint w a hardener. You could even prep the parts and take then to a paint shop and have them spray them with left overs from a job with even better hardened paint. The lights remove easily from the frames with a solder iron. Just pull while you heat.
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
|
|
|
Post Reply
|
|
|