You are browsing camaro6 
01-15-2022, 04:34 PM
|
#1 |
 Drives: '16 Chevrolet Camaro SS Join Date: Sep 2020
Location: Wilmington, NC
Posts: 10
|
Borla long tubes and cat deletes help
Short mods list: rotofab cai
Borla 1 3/4 long tubes No cats Feels a lot slower in the lower rpms... Is that a common problem on long tubes and cat deletes? |
|
|
|
01-15-2022, 05:42 PM
|
#2 | |
         
Drives: '17 2SS H50 Join Date: Mar 2016
Location: Louisa, Ky
Posts: 3,952
|
Quote:
We can see too far.
__________________
2017 H50-2SS-MN6-F55-NPP-RIK-WL4-IO6
1100 - 5/26 0000 - Cancelled - 7/5 Contacted Becky - 7/1 2000 - 7/5 3000 - 7/6 3000 - 7/11 TPW 8/1 3100 - 7/18 TPW 8/1 3300 - 7/20 3400 - 7/21 Built - 8/2 - PS 1,182/1 of 699US 4300 - 8/3 5000 - 8/5 6000 - 8/13 |
|
|
|
|
|
01-15-2022, 06:01 PM
|
#3 |
|
Drives: '16 Chevrolet Camaro SS Join Date: Sep 2020
Location: Wilmington, NC
Posts: 10
|
yes it has a fairly mild tune, he added a little bit of timing and fuel up top to prevent spark knock where it was seen.
|
|
|
|
|
01-15-2022, 10:16 PM
|
#4 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
You tuned it yourself? You should consider E85 sensor and retune. Then you see it make some power with that combo. My C7 went 12.06@116 bone stock. Added E85, long tubes x pipe, I retuned it 11.00@125. With ported intake/tb 10.90@128. Those were in not so good temps and DA. Should have run 10.70s in good air but never got the chance, sold it last winter. Of course the faster times were with Race Star Drag Pack/MH front runners and Nitto 555r2s.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
 Last edited by laynlo15; 01-15-2022 at 10:41 PM. |
|
|
|
|
01-15-2022, 10:35 PM
|
#5 |
|
Drives: '17 2SS H50 Join Date: Mar 2016
Location: Louisa, Ky
Posts: 3,952
|
After my tune, I could feel the power increase. Not big power, but I could tell it gained a bit. I don't feel like the car revs slower, in fact it may rev a bit quicker. Although I've had these mods for years now.
We can see too far.
__________________
2017 H50-2SS-MN6-F55-NPP-RIK-WL4-IO6
1100 - 5/26 0000 - Cancelled - 7/5 Contacted Becky - 7/1 2000 - 7/5 3000 - 7/6 3000 - 7/11 TPW 8/1 3100 - 7/18 TPW 8/1 3300 - 7/20 3400 - 7/21 Built - 8/2 - PS 1,182/1 of 699US 4300 - 8/3 5000 - 8/5 6000 - 8/13 |
|
|
|
|
01-24-2022, 09:33 AM
|
#6 |
|
Drives: '16 Chevrolet Camaro SS Join Date: Sep 2020
Location: Wilmington, NC
Posts: 10
|
Had a small exhaust leak at the clamp, tightened it up and now I’m noticing a lot more torque, thanks guys
|
|
|
|
|
01-24-2022, 04:05 PM
|
#7 | |
 Drives: 1985 Z28 Join Date: Aug 2020
Location: Florida
Posts: 125
|
Quote:
Nice E85 numbers. |
|
|
|
|
|
01-24-2022, 06:00 PM
|
#8 | |
Drives: 2021 LT1 10 speed auto Join Date: May 2013
Location: Connecticut
Posts: 2,343
|
Quote:
|
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
