08-22-2020, 07:34 PM | #1 |
Drives: 2014 1le 1SS CRMT Join Date: Apr 2014
Location: Boston mass
Posts: 1,178
|
Rear suspension bolts !!!
OK , I am waiting on rear Z28 knuckles..
I have done all BMR polyurethane toe rods, trailing arms & lower control arms . And BMR sway adjustable sway bar with Pedders coilovers. My question is . Is it worth or even possible to swap out all the torque to yield bolts?!?! To a stronger or reuseable bolt ?!?! |
08-23-2020, 12:01 AM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Go to your local Fastenal with 1 each of your bolts so you can match the size and get a 12.9 or whatever the metric bolt standard is for the highest/strongest bolt and go from there or try one of the many online hardware sites.
Boltdepot.com is one that comes to mind.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
08-23-2020, 12:54 AM | #3 | |
Drives: 2014 1le 1SS CRMT Join Date: Apr 2014
Location: Boston mass
Posts: 1,178
|
Quote:
Thanks |
|
|
|
|
|