09-24-2018, 06:19 AM | #253 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Great passes for Ultra and Rob. Congrats to both.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
10-06-2018, 04:54 AM | #254 |
Drives: 2017 Camaro 1SS Join Date: Aug 2016
Location: NH
Posts: 1,692
|
Update for my SS with bolt-on parts category #3. All of the seats were still in the car. Instead of the V-Max PTB from last time, used an unported 95mm TB this time. Temps were much cooler this time than they were last time, so better conditions probably played a large part in the improvement.
Tires used on the pass: MT ET Street S/S 275/40-17 rear, MT Sportsman SR 26x6x17 front Performance Mods (if any): DRs and Skinnies, CAI, 95TB, IM, E85 tune, smaller battery Category submitted for: (3) Camaro SS 2016+ Bolt-Ons NO Internal Mods (Stock Displacement) R/T............. .193 60'...............1.632 330'............ 4.651 660'............ 7.128 660’ mph... 100.75 Name of the track: New England Dragway Date of pass: October 5, 2018 Weather conditions: Include Density Altitude if known. (Optional not required) Temp on car display said 58 degrees Timeslip below, right lane |
10-09-2018, 03:50 PM | #255 |
Drives: 2018 Camaro SS , 2017 Corvette Z06 Join Date: May 2018
Location: South Carolina
Posts: 15
|
Anyone else keep checking back for updates and to see what the new 19 10speed cars will run compared to the 8L cars lol. I've been seeing more and more on the road but havent seen anyone with one at the track yet
|
10-09-2018, 04:03 PM | #256 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
I don't think you'll see much difference
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
10-13-2018, 03:01 PM | #257 |
Drives: '16 2SS / '05 SRT10 Ram / '65 bu Join Date: Dec 2015
Location: Philthy
Posts: 978
|
Update;
Car/Engine: 2SS Top Thirty Class: Bolt-Ons *without* Internal Engine Modifications Tires used on the pass: MT R's 305/17 Performance Mods (if any): CAI, LT's, PTB, PIM, DR, skinnies, UDP, gears, WR, cat&muffler delete, e70. R/T: 60': 1.416 330': 4.337 660': 6.737 660' MPH: 102.39 Name/Location of the track: Atco Date of pass: 10/16/2018 Weather conditions: (include Density Altitude, if known. (Optional, not required) DA -400.
__________________
H/C SBE 9.80@140 powered by Texas Speed
Last edited by Snowblind; 10-17-2018 at 07:06 PM. |
10-13-2018, 03:04 PM | #258 |
Drives: 2016 2ss Camaro Join Date: Oct 2013
Location: Alabama
Posts: 119
|
Performance Mods (if any): Pray Ported MSD/95mm TB, Pray tune, RotoFab CAI, TSP LT's, ATI UDP, E85
Category submitted for: 2016+ Camaro SS LT-1 V8 Bolt On's No Internal Mod's R/T...........521 60'.............1.545 330'........... 660'...........6.894 660’ mph...102.44 Name of the track:Alabama International Raceway Date of pass:10/12/2018 Weather conditionsA778, temp 55
__________________
HBM 2016 2SS A8 NPP
427 Pray Head/Cam/Converter, Pray Ported Highram, 103mm TB, Pray Tuned, 3030 Drag Pack, Roark OTR CAI, TSP Headers, E85, UDP Best times 1/4 n/a 9.23@146.96, 1/8 5.91@118 |
10-18-2018, 11:56 PM | #259 |
Drives: 2018 Camaro 2 SS a8 Join Date: Oct 2018
Location: North Carolina
Posts: 5
|
For the bone stock list A8 trans
Car/Engine: 2018 2SS A8
Top Thirty Class: Bone stock 2SS A8 Tires used on the pass: Stock 20 inch Goodyear run flats Performance Mods (if any): None R/T: .2300 60': 1.7719 330': 5.0920 660': 7.7803 660' MPH: 92.90 mph Name/Location of the track: Mooresville Dragway/ Mooresville, NC ..Date of pass:10/18/2018 Weather conditions: (include Density Altitude, if known. ) Density Altitude: 423 feet Relative Density: 98.77 % |
10-21-2018, 04:49 PM | #260 |
Drives: 2017 Camaro 1SS Join Date: Aug 2016
Location: NH
Posts: 1,692
|
Update for my SS bolt-on entry in Category #3. Still has intake manifold, 95tb, cai, e85 tune, drag pack with radials, smaller battery, driveshaft loop. Still has a completely stock exhaust system. This time out, removed the passenger seat and rear seat.
Tires used on the pass: MT ET Street S/S 275/40-17 rear, MT Sportsman SR 26x6x17 front Performance Mods (if any): DRs and Skinnies, CAI, 95TB, IM, E85 tune, W/R Category submitted for: (3) Camaro SS 2016+ Bolt-Ons NO Internal Mods (Stock Displacement) R/T............. .142 60'............. 1.600 330'........... 4.589 660'........... 7.042 660’ mph... 101.61 Name of the track: New England Dragway Date of pass: October 21, 2018 Weather conditions: Include Density Altitude if known. (Optional not required) Temp on car display said 45 degrees Timeslip below |
10-21-2018, 11:12 PM | #261 |
Drives: 14 Silverado LTZ Z71, 16 Camaro SS Join Date: Nov 2009
Location: Jackson, Michigan
Posts: 4,407
|
Tires used on the pass: Hoosier 315/35/17 DR
Performance Mods (if any): DR, Front Skinnies, CAI, PTB, Ported MSD intake , Headers, RSD (rear seat delete) , Front seat delete, carbon driveshaft, cold air scoop, exhaust dump, pump E85. Stock converter. Stock gears. Stock suspension. Category submitted for: Bolt on no internal mods (Stock Displacement) R/T.......... 5.555 60'.............1.541 330'...........4.447 660'...........6.840 660’ mph...101.26 Name of track: Lapeer Dragway Date of pass: 10/21/18 Weather conditions: -300 DA. 41f. 3550 Raceweight Last edited by ULTRAZLS1; 10-22-2018 at 09:59 AM. |
10-22-2018, 11:13 AM | #262 |
Drives: 2018 Camaro SS , 2017 Corvette Z06 Join Date: May 2018
Location: South Carolina
Posts: 15
|
Stock A8 list
Update on my car, went back to the track now that the weather has cooled down and set a new PB. Now I'm tempted to instead of start the bolt ons, to throw on a full drag pack and see how far it will go. 2018 1SS car. DA was right under 1100 Date 10/20/18 at wareshoals Dragway in SC I posted both my slips from the night since I run N/T the date was cut off my better pass of the 7.77 RT .140 60ft 1.766 330 5.073 660 7.778 Mph 92.25 Last edited by 1BAD18SS; 10-24-2018 at 06:40 PM. |
10-27-2018, 05:11 AM | #263 |
Drives: 2017 Camaro 1SS Join Date: Aug 2016
Location: NH
Posts: 1,692
|
Update for my SS with bolt-ons category #3. Still has cai, 95tb, intake manifold, e85 tune, driveshaft loop, smaller battery, drag pack with radials. Still has completely stock exhaust system. Removed the passenger and rear seats.
Tires used on the pass: MT ET Street S/S 275/40-17 rear, MT Sportsman SR 26x6x17 front Performance Mods (if any): DRs and Skinnies, CAI, 95TB, IM, E85 tune, W/R Category submitted for: (3) Camaro SS 2016+ Bolt-Ons NO Internal Mods (Stock Displacement) R/T.............. .124 60'............. 1.590 330'........... 4.550 660'........... 6.983 660’ mph... 102.49 Name of the track: New England Dragway Date of pass: October 26, 2018 Weather conditions: Include Density Altitude if known. (Optional not required) Timeslip below, right lane |
11-04-2018, 04:39 PM | #264 | |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Quote:
__________________
|
|
11-04-2018, 04:57 PM | #265 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,291
|
Updated!
__________________
|
11-11-2018, 10:28 PM | #266 |
Drives: 2018 camaro ss Join Date: Aug 2013
Location: United States
Posts: 578
|
Car/Engine: 1SS A8
Bolt-Ons *without* Internal Engine Modifications Tires used on the pass: Hoosier dr2 drag pack Performance Mods (if any): Pray e85 tune,ported TB/Intake,roto fab R/T: 7541 60': 1.657 330': 4.77 660': 7.33 660' MPH: 95.95 Name/Location of the track: Xtreme raceway park Ferris,TX Date of pass: 11/11/18 Weather conditions: 128ft
__________________
2019 charger scatpack FBO 11.16@122
2020 CAMARO LT1 6spd 11.02@ 135 dragy approved |
|
|
Post Reply
|
Thread Tools | |
|
|