05-12-2019, 11:37 AM | #1 |
Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017
Location: North Ga
Posts: 1,786
|
Boost a pump question
Hey guys, does anyone know which accelerator pedal wire to tap for the red jms trigger wire? I'm sure I can work it out but it's a pita trying to pierce the insulation, manipulate the accelerator and watch the VOM reading while standing on your head in the footwell.
__________________
Baby Blue
2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned |
05-12-2019, 12:15 PM | #2 |
Drives: Hyper Blue 2016 2SS 6M Join Date: Sep 2017
Location: North Ga
Posts: 1,786
|
I searched the forums for info on the trigger wire issue and determined that a jumper harness is now supplied with the gm specific jms units. Apparently the earlier models did not contain the jumper harness. Be that as it may, if i knew which wire to tap, it would be a piece of cake. My unit contained a ~ 6 inch jumper wire with a connector that connects to the red trigger wire on the harness. All i need to know is which one of the 6 wires on the pedal harness to tap
__________________
Baby Blue
2016 Hyper Blue 2SS/6m/MRC/NPP/Silver Rally stripes/ZL1 wheels & brakes/GForce DS and axles/ZLE Cradle Bushings/FE4 ARB front & rear/SEMA Grill/Rotofab dry/95mm TB/Magnuson 2300/Full LT4 fuel system/JMS boost-a-pump/E85 Sensor/Ported CID heads from LME/Cammotion PD cam/Thompson Motorsports forged shortblock/catted Kooks 1 7/8 headers /JRE remote tuned |
|
|
Post Reply
|
|
|