[Anti_venomSS]

Hey Guys. Figured I would create a build thread to track big updates coming to my car in the next month or two. Bored of having a slow car.. so I pulled the trigger last night on a full nitrous setup. Still unsure what shot I will use, but at least it's all ordered. Will use this thread to post kewl pics and show the progress of my car. Goal is to go 9's FBO + Nitrous. Any and all feedback on my setup is highly appreciated!!! Cheers mofos!

Current Setup:
2018 1SS A8
Rotofab wet, Ported stock IM, Ported stock TB, E85 kit
2" TSP Headers, No cats/3" X-pipe/bullet mufflers exiting under the car
Race stars w/ MT ET Street R & Skinnys
Weight Reduction (3350lbs car only)
Hp Tuners w/ Laptop in car (ECM & TCM Tuned)
SFI 3.2/5 Racing Pants/Jacket/Gforce Shoes,helmet
Circle D 3C 3600-3800 Stall
Nitrous Outlet Plate Kit - 15lb bottle, w/ bottle heater, Big show purge, dual vent purge, window switch, etc
Console Switch Panel and Mounting Kit
Nitrous Outlet Dedicated Fuel System w/ C85 in the tank
Promax Dual Channel Progressive Controller
Lingenfelter Timing Retard Controller
BMR Driveshaft Loop

[parbreak]

What part of MD are you in?

[laynlo15]

Good luck, a chutes not required to you run at least 150 mph and that's not an easy task until your at about 1000 rwhp and the nitrous cars never mph like a Supercharged car. Are you doing a chromoly 8 pt? Have a fun build.

[Anti_venomSS]

Originally Posted by parbreak

What part of MD are you in?

Grew up in Charles County man. I'm in Downtown Jersey City now

[Anti_venomSS]

Originally Posted by laynlo15

Good luck, a chutes not required to you run at least 150 mph and that's not an easy task until your at about 1000 rwhp and the nitrous cars never mph like a Supercharged car. Are you doing a chromoly 8 pt? Have a fun build.

Yah 150mph for the parachute. Not sure I want to start practicing with it at 150mph though. I think it's a good idea to practice early and it looks cool too. Yes a full chromoly cage - 5k out the door with a chute. Going to be a long month of waiting.

[laynlo15]

Not a bad idea. Give her hell, that Camaro would look really good on a new Sundowner Trailer. I hope you have plans to bring it to the Camaro Fest in Bowling Green, Ky

[Anti_venomSS]

Originally Posted by laynlo15

Not a bad idea. Give her hell, that Camaro would look really good on a new Sundowner Trailer. I hope you have plans to bring it to the Camaro Fest in Bowling Green, Ky

Ugh 13 hour drive to Camaro Fest. Thanks for the info on the trailers by the way. I’ll be sure to update the thread when the goodies start rolling in. Curious how big of a shot I can run with the dedicated fuel system. Thinking 150 to start.

[Anti_venomSS]

Resurrecting this thread from the dead. All of the above has been installed on the car. Can someone show me how to post photos? Also, my Lingenfelter controller has 2 step but I have heard that a trans brake is better. Thoughts?

New Mods:
2020 Ford F150 - 2" level, 33x12.5x20 wheels
2019 Sundowner 20ft Open Aluminum trailer
Carlyle 15" Pro kit with drilled/slotted rotors
BMR Delrin Diff & Cradle Bushings
Viking 2 way adjustable rear shocks
15" Race Stars (Undecided on tires. Thinking 29x10.5W Hoosiers)
LeadFed Camaro carbon fiber sunroof delete
Kirkey Racing aluminum driver's seat
Braum Racing passenger/driver seat for daily driving
Simpson Racing 5pt harnesses - driver & passenger

[jorgesvlog]

Originally Posted by Anti_venomSS

Resurrecting this thread from the dead. All of the above has been installed on the car. Can someone show me how to post photos? Also, my Lingenfelter controller has 2 step but I have heard that a trans brake is better. Thoughts?

New Mods:
2020 Ford F150 - 2" level, 33x12.5x20 wheels
2019 Sundowner 20ft Open Aluminum trailer
Carlyle 15" Pro kit with drilled/slotted rotors
BMR Delrin Diff & Cradle Bushings
Viking 2 way adjustable rear shocks
15" Race Stars (Undecided on tires. Thinking 29x10.5W Hoosiers)
LeadFed Camaro carbon fiber sunroof delete
Kirkey Racing aluminum driver's seat
Braum Racing passenger/driver seat for daily driving
Simpson Racing 5pt harnesses - driver & passenger

Did you use the full promax controller kit with the fuel and nitrous pressure sensors? How do you like it so far? I am considering going with this controller aswell. Did you set up the wideband input aswell? Im trying to add as many fail safes as possible when i decide to do the nitrous kit on my set up.

[Bohanan23]

What's it run NA? 10's are achievable with little to no weight reduction and FBO. 5thGen&Beyond ran 10.7's

[newchevyman]

Do you have a link or more information on this? Google isn't helping.

LeadFed Camaro carbon fiber sunroof delete

[Anti_venomSS]

Originally Posted by jorgesvlog

Did you use the full promax controller kit with the fuel and nitrous pressure sensors? How do you like it so far? I am considering going with this controller aswell. Did you set up the wideband input aswell? Im trying to add as many fail safes as possible when i decide to do the nitrous kit on my set up.

Yes I use the sensors and no I do not use a wideband. As far as fail safes, doesn't get much more thorough than my kit. I get the car out of the shop Thursday so I will let you know what I think.

[Anti_venomSS]

Originally Posted by Bohanan23

What's it run NA? 10's are achievable with little to no weight reduction and FBO. 5thGen&Beyond ran 10.7's

Haven't ran it with the stall/suspension. Went 11.0 @ 124 in 2500DA stock stall/suspension.

[Anti_venomSS]

Originally Posted by newchevyman

Do you have a link or more information on this? Google isn't helping.

LeadFed Camaro carbon fiber sunroof delete

Hit him up on IG - @leadfed_camaro
He has one of the lightest, sickest 6th gens in the world. Nice guy too.