05-19-2019, 08:32 AM | #15 |
Drives: 2019 ZL1 1LE Join Date: Mar 2014
Location: Georgia
Posts: 182
|
Chances are red won't happen. Unless I can get more people wanting them. Problem is I'll have to buy red resin so I'm already losing money on that just making 1. Then change everything over just to run 1. And then there's a ton of shades of red. But me doing a run of them dapends on how much interest. I'll figure out how many each run will be and work up a schedule for batches. Since I know someone will ask for a gm color matched version. I'll be testing one with some rattle can touch up paint to see how the finish holds up to heat and what not on the resin. |
05-19-2019, 08:36 AM | #16 |
Drives: '17 2SS, NGM, MRC, DPP; '19 F150 Join Date: Apr 2017
Location: Katy (Houston), TX
Posts: 440
|
I’d be interested in a black set, depending on how the intake tube plug is designed.
__________________
2017 Camaro 2SS, Nightfall Grey Metallic, Magride, NPP exhaust, VS Forged VS12s in brushed clear coat (20x9 front, 20x10 rear), Michelin PS4’s (255/40 front, 285/35 rear)
|
05-19-2019, 09:15 AM | #17 |
I am in for a set of plugs
__________________
2016 Camaro 2SS "Black Widow" |
|
05-19-2019, 09:41 AM | #18 |
Drives: 2023 SGM 1SS Join Date: Dec 2017
Location: High Springs, Florida
Posts: 39
|
I would also be interested in a set.
__________________
2023 1SS SGM A10 NPP
|
05-19-2019, 02:00 PM | #19 |
I am also in for set, any color but black if you can.
__________________
2017 Camaro SS 1LE
Pray ported TB/IM TSP 1 7/8 Long tube headers w catted con pipes Taylor plug wires Mishimoto oil cooler Elite X2 catch can |
|
05-19-2019, 02:05 PM | #20 |
SNSTRSS
|
I would like a black set.
__________________
2016 Black Camaro 2SS A8 NP
|
05-19-2019, 04:48 PM | #21 |
Drives: 2019 ZL1 1LE Join Date: Mar 2014
Location: Georgia
Posts: 182
|
So tomorrow im going to fun a final firewall block off plate prototype run. If all goes well with that i can start on those. Intake plugs will fallow. First set will be black and just say Camaro. Might do one small tweak to the firewall plug to protect it from over tightening of the mounting bolt.
That being said intake plugs are going to be designed for the oem ss/zl1 intake. As those are the only intakes on hand. Had a rotofab but it had the sound tube delete. V6 intake plugs i gotta meet up with someone and get some measurements. The plugs should work with intakes that use the oem sound tube stuff but i have no idea of testing it since i dont have any. Colors i had on hand are Black and Gray. I can get other colors but it will either cost more since i have to buy the resin or get enough interest in enough to offset the cost of the resin. |
05-19-2019, 10:41 PM | #22 |
Drives: 2017 2SS M6 Join Date: Jun 2013
Location: WNY
Posts: 7,070
|
iv had stock, Cold Air inductions, and Rotofab they all are just a 1"hole to fill.
__________________
real ZL1 wheels and brakes, 285/305 Michelin Pilot Super Sports, Pray ported Intake manifold, Soler Throttle Body, Rotofab intake, EFI Tuning Flex fuel kit, full American Racing Headers Exhaust, 1 7/8" w/ cats H pipe and mufflers. Full 1LE suspension, with BMR adjustable sway bars and links, GM aluminum cradle bushings, Hurst shifter with lighter reverse spring, TWM shifter knob, Tick level 1 transmission. I should have bought a ZL1
|
05-20-2019, 08:46 AM | #23 |
Drives: 2018 Camaro 2SS M6 Join Date: May 2010
Location: Louisville, KY
Posts: 65
|
I am interested in a black intake plug.
Thanks
__________________
Rick
2018 Camaro 2SS M6 NPP HBM w/Black Metallic Rally Stripes Built 6/21/18 -- Purchased 7/28/18 |
05-20-2019, 09:26 AM | #24 |
Hot Dog
Drives: '17 1SS 1LE Join Date: Feb 2016
Location: Metro Detroit
Posts: 1,937
|
I'm in for a firewall plug. Looks great!
__________________
2017 "M1SS1LE" in Hyper Blue w/PDR
|
05-20-2019, 12:40 PM | #25 |
Drives: 2019 ZL1 1LE Join Date: Mar 2014
Location: Georgia
Posts: 182
|
Not happy with how one part turned out. So I'll be doing another test tomorrow. Going to change some support around and see if this improves it. Working on an intake plug prototype right now. So delayed a day but getting closer
|
05-20-2019, 12:48 PM | #26 |
Daily Driven 1LE
Drives: 2018 1SS 1LE Join Date: May 2018
Location: Fort Knox, KY
Posts: 293
|
Very cool! I'd like one too.
__________________
2018 1SS 1LE
|
05-20-2019, 02:19 PM | #27 |
Drives: 2019 ZL1 1LE Join Date: Mar 2014
Location: Georgia
Posts: 182
|
Haven't did a final trim on the firewall plate so has some tiny nubs from supports. The intake tube plug should be fine just cramming it in and use a clamp to secure but it's threaded for an internal plug to secure it. Haven't cleaned the plugs. Sis some sanding on the top so I can do some thermal test and needed a lapped surface so that's what all the white dust is on the threads. I'll changed the plug design around a little bit. It will be a single peice I just made it a 2 peice to do some pull test on. And see how strong the mounting flange is.
Projected finish date should be on track for Friday. Possibly sooner depending on how some test go tomorrow. Last edited by bignaz; 05-20-2019 at 02:32 PM. |
05-20-2019, 05:24 PM | #28 |
Drives: 2019 ZL1 1LE Join Date: Mar 2014
Location: Georgia
Posts: 182
|
Plug for the SS intake
|
|
|
Post Reply
|
|
|