12-03-2020, 11:24 AM | #1 |
Drives: 17 2SS 6sp Join Date: Jun 2020
Location: Bad Roads, North Jersey
Posts: 185
|
Michael "Bolt-on" will sing...
..."When a Man Loves a Camaro"!
Haha sorry could resist. That's right, my LT2 manifold came in today!! Ordered it from gpi on Black friday - saved a penny and super fast delivery time! Man I can not wait to get this on the car. I have that same feeling I had when I was a teenager about to get my first bj lol. I had gpi do the modifications to the underside of the manifold in order to have it fit on my Camaro. Also ordered the map extension harness. I plan to run it with my Vmax stock ported throttlebody and rotofab. Texas speed headers and lethal's flex fuel line will be installed all at the same time. Then Pray's tune to tie everything together. What kind of dyno numbers would I see with that setup? car is a 6sp. Lastly, any tips, tricks, or anything I should be made aware of about the install of this manifold? Thanks in advance |
12-03-2020, 11:29 AM | #2 |
Drives: 17 2SS 6sp Join Date: Jun 2020
Location: Bad Roads, North Jersey
Posts: 185
|
She's a beauty
|
12-03-2020, 03:50 PM | #3 |
Drives: 2017 Camaro 2SS Join Date: Mar 2019
Location: Lakeland, Florida
Posts: 416
|
I think there's a thread here somewhere with tips, how to adjust for size, etc...
__________________
Gary
2017 2SS A8 White, Bolt-Ons, Prayed Upon |
12-03-2020, 05:46 PM | #4 |
Drives: like an old lady Join Date: Jun 2012
Location: indiana
Posts: 2,395
|
might need to modify the vacuum lines on the driver side. the pcv stuff where it goes into the intake manifold will be different. i had a catch can already so it wasnt a big deal, but idk if the stock lines will work as the inlet nipple placement is different from stock.
edit: added pic
__________________
2016+ camaro: everyone’s first car
Last edited by s346k; 12-03-2020 at 05:59 PM. |
12-03-2020, 10:46 PM | #5 | |
Drives: 17 2SS 6sp Join Date: Jun 2020
Location: Bad Roads, North Jersey
Posts: 185
|
Quote:
|
|
|
|
Post Reply
|
|
|