12-02-2018, 11:28 AM | #29 |
Drives: 2017 LT1 Join Date: May 2018
Location: Iowa
Posts: 44
|
|
12-02-2018, 11:35 AM | #30 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,797
|
The dyno results look about right to me. The Ported MSD doesn't shine until you port the heads and install a cam that will utilize it's upper rpm flow capability. The L86 was designed to make more low-midrange torque and the msd was designed to increase peak rpm and HP being the engine can utilize it.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
12-02-2018, 12:01 PM | #31 |
Drives: 2018 Camaro 1SS 1LE Join Date: Jun 2018
Location: Flower Mound, Texas
Posts: 66
|
If you look at the graph the red line says flex fuel and headers. All I'm asking is if the blue one has the name mods.
|
12-02-2018, 12:18 PM | #32 |
Drives: 2017 LT1 Join Date: May 2018
Location: Iowa
Posts: 44
|
|
12-03-2018, 02:40 PM | #33 |
Drives: 2016 2SS 8AT Join Date: May 2018
Location: Nevada
Posts: 358
|
Found this post you can see the lt1 Mani is in the middle of both the l86 and msdon torque and hp. https://www.gm-trucks.com/forums/top...omment=1914381
|
12-03-2018, 03:26 PM | #34 |
Drives: 2018 Audi TT RS Join Date: Jan 2014
Location: Navarre, Florida
Posts: 1,915
|
Now that I see them laying there next to each other, I’m less confident that this intake manifold would fit under the stock hood. But, I hope someone has one laying around that they’re willing to test fit.
__________________
2018 Audi TT ▊RS
2.4X 0-60, 1.6X 60', 120+mph 1/8th, 4.XX 60-130, 150+mph traps on 255/35/18 R888R tires on the street (unprepped). 2019 Audi RS3 About as fast as the TT RS 2019 Camaro ZL1 1LE Sold 2018 Camaro SS 1LE Sold 2019 Corvette Z06 Sold 2021 Charger Hellcat Redeye Widebody Sold |
12-03-2018, 07:13 PM | #35 |
Drives: Chevrolet Camaro SS Join Date: Mar 2015
Location: Planet Earth
Posts: 721
|
A year ago I posed this question about going to the truck based on the LS3 benefits and the idea was pooh-poohed.
I'll have a 5.3 truck intake soon as I'll be doing a 6.2 truck on a 5.3 truck for the bigger TB .... seems no one ports the 5.3 TB. Based on the strut tower brace height I believe the intake will clear the hood but not sure of the cowl over-hang |
12-03-2018, 11:06 PM | #36 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
perfect excuse to get a carbon fiber ZL1 type hood, just saying... or the IROC.
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
12-04-2018, 04:48 AM | #37 |
Drives: 2018 Audi TT RS Join Date: Jan 2014
Location: Navarre, Florida
Posts: 1,915
|
I was half a step away from buying one and several vendors steered me clear of it. If someone actually had one in stock, I may reconsider. The Anderson hood, that is.
__________________
2018 Audi TT ▊RS
2.4X 0-60, 1.6X 60', 120+mph 1/8th, 4.XX 60-130, 150+mph traps on 255/35/18 R888R tires on the street (unprepped). 2019 Audi RS3 About as fast as the TT RS 2019 Camaro ZL1 1LE Sold 2018 Camaro SS 1LE Sold 2019 Corvette Z06 Sold 2021 Charger Hellcat Redeye Widebody Sold |
12-04-2018, 11:32 AM | #38 |
Drives: 2017 LT1 Join Date: May 2018
Location: Iowa
Posts: 44
|
L86 intake is 8 3/8"s total height without the insulator cover installed. Measured off the truck sitting flat on my tool box top. Hope that helps!
|
12-04-2018, 03:48 PM | #39 |
Drives: 2018 Audi TT RS Join Date: Jan 2014
Location: Navarre, Florida
Posts: 1,915
|
I wonder if the intake sits deeper into the valley than the LT1 intake. That could help offset the height of it a bit.
__________________
2018 Audi TT ▊RS
2.4X 0-60, 1.6X 60', 120+mph 1/8th, 4.XX 60-130, 150+mph traps on 255/35/18 R888R tires on the street (unprepped). 2019 Audi RS3 About as fast as the TT RS 2019 Camaro ZL1 1LE Sold 2018 Camaro SS 1LE Sold 2019 Corvette Z06 Sold 2021 Charger Hellcat Redeye Widebody Sold |
12-04-2018, 03:54 PM | #40 |
Drives: 2016 2SS 8AT Join Date: May 2018
Location: Nevada
Posts: 358
|
does the l86 have the foam under it like the 5.3s do? Cause if so they might not sit as deep. Anyone wanna donate to the buy and try fund?
|
12-04-2018, 04:17 PM | #41 |
Drives: SS 6 speed of course Join Date: Jan 2016
Location: Hilo, HI
Posts: 4,316
|
IMO the best measurement would be from the top of the intake port (roof of the actual port) to the highest external point on the runners
__________________
Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.
|
12-04-2018, 05:32 PM | #42 |
Drives: 2017 LT1 Join Date: May 2018
Location: Iowa
Posts: 44
|
There is foam under the L86 intake just like the LT1 but they are different. LT1 on left and L86 is on the right.
|
|
|
Post Reply
|
|
|