I wrapped it - Page 3

Scottyz · 02-14-2019, 03:52 AM

Car looks great Angry.
I’m assuming your installer bought a roll of the SunTek rather than use their precut stuff?

Regarding the fuel door. I ordered the carbon insert door. Pretty sure it was about $350. That’s Canuck money though but still pricey.

Scottyz · 02-14-2019, 04:32 AM

Just looked at the fuel door. $355 MSRP. $258 Invoice.

Zigg L1 · 02-14-2019, 03:22 PM

Found one on the eBay for 150. Custom painted for 75. Gonna look fresh this season

Alain · 02-14-2019, 05:49 PM

Quote:

Originally Posted by jvandy50

Well well, stole your idea and cashed in some vouchers...thanks!

Right on dude !!! It’s an easy install too!

angryBits · 02-15-2019, 04:43 PM

Quote:

Originally Posted by jvandy50

Love it.

I’ve even looked at a black gas cap to break up that solid color wall but just couldn’t do it, the door handles are a much better idea.

I like the black gas cap, but I've resisted doing it because it's only on one side.

I do think it would go nicely with the door handles though.

angryBits · 02-15-2019, 04:45 PM

Quote:

Originally Posted by Alain

I wonder how hard of an install it would be, lots of nooks and crannies in a door handle. Will probably be a nightmare to install myself.

My wrap-guy took the handles off to do it. He had to take the interior door panels off. I was actually kind of upset that he did that because I didn't want to acquire new creaks and rattles but luckily he did a good job and so far no new creaks and rattles.

If I had to do it over, I'd find a way to wrap it without taking off the interior door panels or just skip it.

angryBits · 02-15-2019, 04:47 PM

Quote:

Originally Posted by Scottyz

Car looks great Angry.
I’m assuming your installer bought a roll of the SunTek rather than use their precut stuff?

Yeah he buys bulk and does it all by hand.

Viper-6 · 09-10-2021, 09:25 AM

My 2021 ZL1 is Summit white with exposed carbon heat extractor. I black satin wrapped the hood, the roof and painted the mirrors, door handles and spoiler the same. The WHOLE vehicle was then wrapped in XPEL Stealth and a full ceramic coat free for wrapping the entire car. It's definitely a unique car with that subtle sheen. I tried using my points to purchase the fuel door also. I have 21,000 but it will only apply 12,500 ($62.50) so I guess I'll have to contact the dealer.

RamAir02 · 09-10-2021, 05:38 PM

The wrap looks great. Really like the door handles too. Personally, I'm not a fan of contrasting color fuel doors, so I'm glad you skipped that. IMHO, I don't like the idea of drawing attention to the area you fuel up. I'd prefer no fuel door and filler behind the license plate like in the old days

arpad_m · 09-10-2021, 07:25 PM

Quote:

Originally Posted by RamAir02

The wrap looks great. Really like the door handles too. Personally, I'm not a fan of contrasting color fuel doors, so I'm glad you skipped that. IMHO, I don't like the idea of drawing attention to the area you fuel up. I'd prefer no fuel door and filler behind the license plate like in the old days

I'm afraid OP is long gone

Interesting point about the fuel door, though. I never had a problem, although at times I do cringe about the 0.01 cents GM saved by not adding the lock solenoid to US Camaros (the export trim does have a locking fuel door). It'd be a nice to have, preferably with an enable/disable toggle in vehicle settings.

RamAir02 · 09-10-2021, 07:27 PM

Quote:

Originally Posted by arpad_m

I'm afraid OP is long gone

Oof, I paid no attention to dates smh

09-10-2021, 05:38 PM	#37
RamAir02 Shadow Gray '19 ZLE M6 Drives: '19 ZL1 1LE M6 Join Date: Apr 2009 Location: NJ Posts: 1,440 View My Garage	The wrap looks great. Really like the door handles too. Personally, I'm not a fan of contrasting color fuel doors, so I'm glad you skipped that. IMHO, I don't like the idea of drawing attention to the area you fuel up. I'd prefer no fuel door and filler behind the license plate like in the old days __________________ 2019 ZL1 1LE \| M6 \| SGM \| PDR \| CF Dash \| Nav \| Wheel Locks PPF \| Paint Correction \| ZL1 Addons Rock Guards \| ZL1 Addons Lift Pads \| ZL1 Addons Feather Lite Tow Hook \| JWM Smoked Sidemarkers \| Wildhammer Smoked Rear Reflectors \| JWM License Plate LEDs \| RotoFab CAI \| ADM IC Reservoir v2 \| BC Forged RZ05 \| SPL Toe Arms \| BW Brake Deflectors \| CMS Roll Bar \| Schroth Profi II ASM Harnesses . Sold: '99 Trans Am (bolt-ons & cam) \| '00 WS6 (bolt-ons, heads, cam, 12 bolt) \| '05 CTS-V (bolt-ons, short throw) \| '10 SS/RS M6 (short throw, CAI, coilovers, LTs, catback, JRE tune) \| '01 WS6 YouTube

02-14-2019, 03:52 AM	#29
Scottyz 2019 ZL1 1LE MY GOON Drives: 1980 Z28 Big Red. Join Date: Dec 2018 Location: Stoney Creek Posts: 2,061	Car looks great Angry. I’m assuming your installer bought a roll of the SunTek rather than use their precut stuff? Regarding the fuel door. I ordered the carbon insert door. Pretty sure it was about $350. That’s Canuck money though but still pricey.

02-14-2019, 04:32 AM	#30
Scottyz 2019 ZL1 1LE MY GOON Drives: 1980 Z28 Big Red. Join Date: Dec 2018 Location: Stoney Creek Posts: 2,061	Just looked at the fuel door. $355 MSRP. $258 Invoice.

02-14-2019, 03:22 PM	#31
Zigg L1 Drives: 2018 ZL1 Garnet Red Tintcoat A10 Join Date: Jan 2019 Location: NY Posts: 537	Found one on the eBay for 150. Custom painted for 75. Gonna look fresh this season

09-10-2021, 09:25 AM	#36
Viper-6 Drives: 2021 Chevrolet Camaro ZL1 Join Date: Apr 2021 Location: Huntsville Alabama Posts: 23	My 2021 ZL1 is Summit white with exposed carbon heat extractor. I black satin wrapped the hood, the roof and painted the mirrors, door handles and spoiler the same. The WHOLE vehicle was then wrapped in XPEL Stealth and a full ceramic coat free for wrapping the entire car. It's definitely a unique car with that subtle sheen. I tried using my points to purchase the fuel door also. I have 21,000 but it will only apply 12,500 ($62.50) so I guess I'll have to contact the dealer.

User Name		Remember Me?
Password