[infinitereality]

Been meaning to post a few pics this weekend, but never got around to it. Will post outside ones soon.

[Wuiquen]

Originally Posted by infinitereality

Been meaning to post a few pics this weekend, but never got around to it. Will post outside ones soon.

Looks awesome... This is my backup plan if my next high wing fails..

Sent from my moto g(7) power using Tapatalk

[infinitereality]

Originally Posted by Wuiquen

Looks awesome... This is my backup plan if my next high wing fails..

Sent from my moto g(7) power using Tapatalk

To be honest, some angles I completely love compared to the stock spoiler, BUT there are some angles I'm iffy about. When I say iffy, it's just a little too much for an otherwise stock car. I'll get some outside pictures to show what I mean and by all means take it with a grain of salt, just personal preference.

That being said, with some new wheels and lower the car, I think it'd flow way better at those iffy angles. Both of them I plan to do sooner than later.

I'll still rock it as is though.

[Z Boss]

Looks awesome! This exposed CF spoiler was $549 and fit using ZL1 deckled holes? General question: are ZL1 and ZL1 1LE (ZLE) rear deck lid spoiler holes different? I'd like to try this look on a ZLE!

[Jaxcam02]

Originally Posted by Z Boss

Looks awesome! This exposed CF spoiler was $549 and fit using ZL1 deckled holes? General question: are ZL1 and ZL1 1LE (ZLE) rear deck lid spoiler holes different? I'd like to try this look on a ZLE!

No they have the same bolt hole locations.

[Wuiquen]

Originally Posted by Z Boss

Looks awesome! This exposed CF spoiler was $549 and fit using ZL1 deckled holes? General question: are ZL1 and ZL1 1LE (ZLE) rear deck lid spoiler holes different? I'd like to try this look on a ZLE!

Who would give up their wing for this? If you are, let me know. I want the high wing....



Sent from my moto g(7) power using Tapatalk

[Wuiquen]

Originally Posted by infinitereality

To be honest, some angles I completely love compared to the stock spoiler, BUT there are some angles I'm iffy about. When I say iffy, it's just a little too much for an otherwise stock car. I'll get some outside pictures to show what I mean and by all means take it with a grain of salt, just personal preference.



That being said, with some new wheels and lower the car, I think it'd flow way better at those iffy angles. Both of them I plan to do sooner than later.



I'll still rock it as is though.

I think you will get used to it. I have to say it is one of the best looking blade spoilers. If I go this route, i would add a wickerbill too. Supposedly they were making one for it too.

I have ZLE wheels and soon will have the front bumper aero pieces. So i need some extreme spoiler.

Which wheels do you wanna go with?

Sent from my moto g(7) power using Tapatalk

[infinitereality]

Originally Posted by Wuiquen

I think you will get used to it. I have to say it is one of the best looking blade spoilers. If I go this route, i would add a wickerbill too. Supposedly they were making one for it too.

I have ZLE wheels and soon will have the front bumper aero pieces. So i need some extreme spoiler.

Which wheels do you wanna go with?

Sent from my moto g(7) power using Tapatalk

With the ZLE front end, I'm with you for sure as a good back-up spoiler if the high wing falls through.

Looking out the back glass through the review mirror I dig seeing the spoiler on each side of the center notch.

At the moment a set of Rohana RFX11 wheels in 20" is my choice. But if I come across a used set of SS1LE wheels (OEM or MMR M017) for a good price that needed a refinishing I'd jump on that immediately. Mainly so I could get them powdercoated in something other than gray, black or silver and call it good......at least for now.

[Wuiquen]

Originally Posted by infinitereality

With the ZLE front end, I'm with you for sure as a good back-up spoiler if the high wing falls through.

Looking out the back glass through the review mirror I dig seeing the spoiler on each side of the center notch.

At the moment a set of Rohana RFX11 wheels in 20" is my choice. But if I come across a used set of SS1LE wheels (OEM or MMR M017) for a good price that needed a refinishing I'd jump on that immediately. Mainly so I could get them powdercoated in something other than gray, black or silver and call it good......at least for now.

Yeah I love the SS 1LE wheels but I don't like their offset.. if they made those in ZLE offset, i would have gotten a set... I love the concave look of the ZLE wheels. Similar to the M series wheels.

Sent from my moto g(7) power using Tapatalk

[infinitereality]

Originally Posted by Wuiquen

Yeah I love the SS 1LE wheels but I don't like their offset.. if they made those in ZLE offset, i would have gotten a set... I love the concave look of the ZLE wheels. Similar to the M series wheels.

Sent from my moto g(7) power using Tapatalk

Totally agree, wish they had the ZLE offsets (or at least some where in between), but at least the rear offsets are close.

I'm running a 5mm spacer in the front and 3mm in the rear and while looks better than OEM, it needs more. If I end up with 1LE wheels, I definitely will swap in some longer studs in the front so I can run an additional spacer to get the right offset. Easy job to do, just waiting to to see if it's needed first.

[willzilla]

Originally Posted by infinitereality

Been meaning to post a few pics this weekend, but never got around to it. Will post outside ones soon.

That looks good! Quality on it pretty good overall? Nice weave and what not.

Is it taller than the stock ZL1 "wing"?

[infinitereality]

Originally Posted by willzilla

That looks good! Quality on it pretty good overall? Nice weave and what not.

Is it taller than the stock ZL1 "wing"?

That's a good question, I honestly am not sure. They seem pretty close in height, but I think the stock spoiler may be a tad bit taller.