You are browsing camaro6 
06-23-2021, 11:40 PM
|
#43 | |
    
Drives: 2019 Camaro Z-28 Join Date: Jul 2010
Location: Dallas
Posts: 1,483
|
Ideal SS 1LE wheel/tire setup
Quote:
Using this setup you WILL NOT have tire poke at the top of the wheel well. Overall tire wheel diameter is 26 inches. The ZL1 fenders as you are aware provide a little more room on the FRONT fenders compared to an SS variant. I am tracking this setup at COTA this weekend. I will provide pictures after this weekend of that set up on the track.
__________________
__________________________________________
2019 SS 1LE BIG NA A10 Eagles Canyon Raceway 2.7 CCW Below https://youtu.be/c9M5UHDftcA 4-15-23 at SCCA TT U1 Class MEGA Thread on THIS car: https://www.camaro6.com/forums/showthread.php?t=602092 Retired Cars BELOW: 1973 Camaro, 1969 Camaro, 1969 Camaro SS RS 2010 Camaro SS with 1000HP F1R, 2019 ZL1 1LE A10 |
|
|
|
|
07-13-2021, 06:43 AM
|
#44 |
 Drives: 370z, Srt-6 Join Date: Aug 2017
Location: Montgomery
Posts: 120
|
Card was charged yesterday, Cory said they should ship out this morning at the latest, hope to get mounted this weekend, quick heat cycle and an event at Barbers the 24th
|
|
|
|
|
07-13-2021, 02:21 PM
|
#45 | |
     Drives: '16 Garnet Red 1SS Join Date: Mar 2014
Location: College Station, TX
Posts: 3,450
|
Quote:
 I'm still looking at end of July according to Cory.
__________________
'16 Camaro 1SS
'18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata |
|
|
|
|
|
07-13-2021, 02:48 PM
|
#46 | |
|
Drives: 370z, Srt-6 Join Date: Aug 2017
Location: Montgomery
Posts: 120
|
Quote:
|
|
|
|
|
|
07-13-2021, 04:50 PM
|
#47 |
|
Drives: '16 Garnet Red 1SS Join Date: Mar 2014
Location: College Station, TX
Posts: 3,450
|
19x10. I entered in like 2 days before the end.
__________________
'16 Camaro 1SS
'18 Miata GT Gone: '01 Camaro, '14 Camaro, '90 Miata |
|
|
|
|
07-16-2021, 01:55 PM
|
#48 |
 
Drives: V6 1LE Join Date: Apr 2021
Location: Corinth, TX
Posts: 11
|
I get today the 11x18 !!!
|
|
|
|
|
07-16-2021, 02:14 PM
|
#49 | |
|
Drives: 370z, Srt-6 Join Date: Aug 2017
Location: Montgomery
Posts: 120
|
Quote:
|
|
|
|
|
|
07-16-2021, 10:17 PM
|
#50 |
|
Romans10:9-13
Drives: /\yes, this is me/\ Join Date: Nov 2008
Location: Vermilion, Ohio
Posts: 4,435
|
got mine yesterday as well. getting the rubber mounted. weighed them also. put the data in my ZL1-1LE wheel weight thread
__________________
 |
|
|
|
|
07-22-2021, 06:14 PM
|
#51 |
|
Drives: 370z, Srt-6 Join Date: Aug 2017
Location: Montgomery
Posts: 120
|
Wheels are on, had to take off the plastic shield covering the A-arm, was hitting ever so slightly. Will run these this weekend and grind it down a touch, 315/30/18 and 335/30/18
|
|
|
|
|
07-28-2021, 12:11 PM
|
#52 |
 
Drives: 2019 ZL1 1LE Join Date: Sep 2010
Location: Bastrop, TX
Posts: 438
|
Got my wheels in time for the GTA / SCCA TimeTrials event at the Ridge last weekend. This is 325/30-19 Supercar 3 on 19x12 square. The car was clean when it came off the trailer, but not so clean by the time I got these pics.
I made sure to get awesome cars in the background. I was the fastest SCCA TT car on street tires, but yeah... I was slower than the McLaren who was in my run group. Edit: added bonus pic to show fender clearance. This is 19x12+41 from the Group Buy with a 25mm spacer in front. This fitment is NOT POSSIBLE without MCS struts, as they provide significantly more inboard clearance than stock struts. Last edited by rotis; 07-28-2021 at 12:43 PM. Reason: Added clearance pic |
|
|
|
|
07-30-2021, 08:17 AM
|
#53 |
|
|
Rotis... you just ruined my weekend with "This fitment is NOT POSSIBLE without MCS struts"
What camber are you running in the front & rear? Looking to get into the same square setup this winter. |
|
|
|
|
07-30-2021, 10:08 AM
|
#54 | |
Drives: 2017 Blue Camaro 1SS 1LE with PDR Join Date: Sep 2018
Location: Houston, TX
Posts: 960
|
Quote:
I had to do the strut mod to fit stock front ZLE 11" wheels on my SS 1LE and they poke out enough that I would not run them regularly on the street due to flinging pebbles onto the side of the car even with rock guards. https://www.camaro6.com/forums/showthread.php?t=526353 https://www.camaro6.com/forums/showp...3&postcount=10 Here's a pic with the 11" ZLE wheel at -2.8° front camber thanks to the strut mod. I was maxed out at -2.4° before that and the angle grinding part of the strut mod to remove some metal was required to get enough inboard clearance to use the 11" front wheels at -2.4° anyways so I also did the hole elongation part to get more camber while I was at it. I probably need to do some more strut mod work to try getting -3.2° on both sides at some point but I want to see how even tire wear looks on this set of stock tires first. It would have been faster/easier to just buy camber plates and run a front spacer to avoid the angle grinding but that is not required. Last edited by cdrptrks; 07-30-2021 at 10:35 AM. |
|
|
|
|
07-30-2021, 11:34 AM
|
#55 |
  
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,813
|
im going to try and fit zl1 1le fitment on my 1ss once i get the mcs coilovers installed with camber plates i should be able to get at least -3.5 in the front and -2.5 or so in the rear gonna borrow a buddys wheels to testfit before i buy anything just to make sure
__________________
 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS |
|
|
|
|
07-30-2021, 12:34 PM
|
#56 |
|
Drives: 2019 ZL1 1LE Join Date: Sep 2010
Location: Bastrop, TX
Posts: 438
|
The zl1 1le fitment on a SS is tough because of the offset. 18x11 +20'ish is a piece of cake with the MCS setup. Right now in front I run 18x12 +15, I think it's possible to do that and still keep it off the fenders. It'll be tight though.
I am at approximately -3.8deg front and -1.9deg rear camber. |
|
|
|
|
|
|
|
|
Post Reply
|
|
|
