10-19-2019, 09:08 AM | #1 |
Drives: Camaro ZL1 Join Date: Apr 2019
Location: London, UK
Posts: 304
|
Custom NX L4 lid
Super pleased with the result.
I bought an NX Lid a while ago and will eventually be going with direct port Meth, mainly for cooling. I had it powder coated red and had some custom hi-temp decals made up. I replaced the LT4 with 6.2 so I stop getting asked that question So stoked - I think it looks great.
__________________
Made in the USA. Refined in Great Britain - insta: zl1uk
Velossa intake, Rotofab, Mamo TB, Custom ported NX Lid & Jokerz Full tilt ported LT4 charger, 3 port CoolingMist Meth injection - ATI 15% lower pulley, E2X CC, TSP ceramic coated longtubes, de-cat and Borla 60608 to NPP box, JRE tune, BMR rear control & trailing arms, lock-out kit, lowering springs and front strut brace, Custom carbon trim interior, Xpel ultimate front PPF and Prestige window tint with Chameleon Windscreen tint...ever evolving... |
10-19-2019, 09:29 AM | #2 |
Drives: 2018 ZL1 Hyper Blue A10 Join Date: Jan 2018
Location: Covington LA
Posts: 646
|
Great idea....
Looks good!!!!! |
10-19-2019, 02:21 PM | #3 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
I dig it!
|
10-19-2019, 08:46 PM | #4 |
Drives: 2016 Challenger Hellcat, 2018 ZL1LE Join Date: Dec 2009
Location: Northern NJ
Posts: 3,003
|
That looks great!! Is your car red ? If so, how close of a match is the paint ?
__________________
2016 Challenger Hellcat /B5 blue/Sepia interior/Brass Monkey Wheels/
2018 ZL1 1LE/Red hot 2019 Shellby GT 350R/ Oxford white/ Matte Black Stripes/ Carbon Fiber Dash/ Electronics Package #413 |
10-19-2019, 09:29 PM | #5 |
Looks awesome!
|
|
10-20-2019, 01:34 AM | #6 | |
Drives: Camaro ZL1 Join Date: Apr 2019
Location: London, UK
Posts: 304
|
Quote:
Adds a little dramatic contrast
__________________
Made in the USA. Refined in Great Britain - insta: zl1uk
Velossa intake, Rotofab, Mamo TB, Custom ported NX Lid & Jokerz Full tilt ported LT4 charger, 3 port CoolingMist Meth injection - ATI 15% lower pulley, E2X CC, TSP ceramic coated longtubes, de-cat and Borla 60608 to NPP box, JRE tune, BMR rear control & trailing arms, lock-out kit, lowering springs and front strut brace, Custom carbon trim interior, Xpel ultimate front PPF and Prestige window tint with Chameleon Windscreen tint...ever evolving... |
|
10-20-2019, 08:45 AM | #7 |
Drives: 2019 ZL1 Join Date: Oct 2019
Location: GA
Posts: 573
|
Very nice! Who made the high temp decals by chance if you dont mind sharing?
|
10-20-2019, 08:48 AM | #8 |
Drives: Camaro ZL1 Join Date: Apr 2019
Location: London, UK
Posts: 304
|
Local company to me, not much use to you I'm afraid!
Any Vinyl shop should be able to do something similar though
__________________
Made in the USA. Refined in Great Britain - insta: zl1uk
Velossa intake, Rotofab, Mamo TB, Custom ported NX Lid & Jokerz Full tilt ported LT4 charger, 3 port CoolingMist Meth injection - ATI 15% lower pulley, E2X CC, TSP ceramic coated longtubes, de-cat and Borla 60608 to NPP box, JRE tune, BMR rear control & trailing arms, lock-out kit, lowering springs and front strut brace, Custom carbon trim interior, Xpel ultimate front PPF and Prestige window tint with Chameleon Windscreen tint...ever evolving... |
|
|
Post Reply
|
Thread Tools | |
|
|