[Green82]

Originally Posted by arpad_m

No, you'll be fine. This is a standard SS 1LE / ZL1 tire size, the wheel well and the main body wire harness are clearanced to accommodate it. I think the offset of those MRRs is within a few mm of stock, not enough of a difference to interfere with anything.

If you want to do additional research, here is a great site to start with: https://wheel-size.com

is that harness only on SS models or higher?

i have new wheels and tires coming in today and i have a LT1 was wondering if i even had that wire harness

[arpad_m]

Originally Posted by Green82

is that harness only on SS models or higher?

i have new wheels and tires coming in today and i have a LT1 was wondering if i even had that wire harness

Sorry, I don't know whether or how the main body harness routing changed between each model year. There was a change in 2020, but I'm not sure about the LT1 trim... easiest is to just pop off the liner and check it yourself, since you'll have the wheel(s) off anyway.

[2SS Capt]

Originally Posted by Green82

is that harness only on SS models or higher?

i have new wheels and tires coming in today and i have a LT1 was wondering if i even had that wire harness

I think it is on all, here is before and after on my 2020 2SS... It takes about 10 minutes to move once the wheel is off...

[bandier]

Great pics 2SS Capt! Nice, clear and concise. Thank you. I got my new rims that'll be going on in the next couple weeks. Gotta get the tires now. See you at the next CCSD meet.

[2SS Capt]

Originally Posted by bandier

Great pics 2SS Capt! Nice, clear and concise. Thank you. I got my new rims that'll be going on in the next couple weeks. Gotta get the tires now. See you at the next CCSD meet.

Happy to help! Look forward to catching up soon!