You are browsing camaro6 
05-28-2023, 07:01 AM
|
#1 |
  
Drives: 2017 Camaro SS 50th Anniversary Join Date: Apr 2021
Location: Missouri
Posts: 929
|
What crank pulley to use with Procharger and ATI balancer?
Looking at using an ATI balancer instead of the stock one, but having trouble figuring out what crank pulley i can use with my P1X. I'm concerned with offsets and alignment and not so much the diameter.
Any suggestions? Theres lots of "supercharger crank pulleys", but nothing that seems specifically geared towards aftermarket balancer and procharger. Some specific part numbers would be great if you've already made the switch.
__________________
2017 50th Anniversary Edition | P1X Stage 2
DSX Aux Low Side | LT4 high side | Flex Fuel TooHighPsi Port Injection (installed & tuning) CircleD 3K Stall | QA1 CF Driveshaft Forgestar F14 Drag 17x10 NT555R2 305/45/17 Rear Forgestar F14 18x8 NT555G2 235/50/18 Front 10.84@131 w/4.13" pulley ??.??@??? w/3.7" pulley (installed & tuning) |
|
|
|
05-28-2023, 08:09 AM
|
#2 |
|
Drives: 2019 2SS Camaro Join Date: Apr 2012
Location: Al
Posts: 828
|
Contact Bob beam at brute speed. Their are only 2 options with procharger and ati balancer. 8 rib and 10 rib. They are both 8.25. U just bolt them on and alignment is supposed to be the same as stock balancer and the pulley that comes in the kit. I run the 10 rib with 8 rib belt and upper pulley lol. Tring to decide on my upper size to go 10 on it
|
|
|
|
|
05-28-2023, 08:15 AM
|
#3 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
I run a toohighpsi 10 rib with 9.25 lower for my Maggie 2300.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
 |
|
|
|
|
05-28-2023, 02:32 PM
|
#4 | |
|
Drives: 2019 2SS Camaro Join Date: Apr 2012
Location: Al
Posts: 828
|
Quote:
|
|
|
|
|
|
05-28-2023, 06:06 PM
|
#5 | |
|
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Quote:
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
