Whipple 3.0 is live - Page 12

Joshinator99 · 02-14-2023, 08:27 PM

Quote:

Originally Posted by Nmolina9239

Can anyone with a Fore fuel system share where they mounted their fuel regulator. Have an idea of mounting mine by the drivers side shock tower but wanted more ideas before committing. TIA

I mounted mine on the backside of my Rotofab Big Gulp heat shield (the 2 small stainless button head screws mount it to the heat shield). Tough to see, but it’s there and has worked out well. The -10 AN fuel line runs up to the HPFP tee then continues on to the regulator. From the regulator the -8 AN return line runs back to the tank (ethanol sensor is in the return line too). Running those fuel lines was a time consuming endeavor… don’t skimp on high quality fire sleeve either. Hope that helps!

Nmolina9239 · 02-14-2023, 08:34 PM

That idea came up but I was nervous about it bouncing around for some reason. I was going to mount it right in that same location but just off of the shock tower. Made a template for a bracket to cut out using the two bolts that the Whipple fill bottle bracket mounts onto. Thanks for sharing Josh

Joshinator99 · 02-14-2023, 08:39 PM

Quote:

Originally Posted by Nmolina9239

That idea came up but I was nervous about it bouncing around for some reason. I was going to mount it right in that same location but just off of the shock tower. Made a template for a bracket to cut out using the two bolts that the Whipple fill bottle bracket mounts onto. Thanks for sharing Josh

It’s *very* solid in the location I have it in…no worries there. The Whipple fill point moves around way more FWIW…

Happy to help! Post up some pics when you’re done.

ZL1Atlanta · 02-15-2023, 03:38 PM

Vengeance has one of these in stock ready to ship if anyone is looking. Just saw them post it today. It is the polished style and was a replacement for a failed 2.9, but the customer went a different direction I guess.

JSH · 02-15-2023, 04:53 PM

Quote:

Originally Posted by ZL1Atlanta

Vengeance has one of these in stock ready to ship if anyone is looking. Just saw them post it today. It is the polished style and was a replacement for a failed 2.9, but the customer went a different direction I guess.

No thanks. I've spent enough on this rig!

Nmolina9239 · 02-27-2023, 02:11 PM

Anyone having any luck with getting Port Injection setup?

ZO6Ted · 02-27-2023, 07:44 PM

My daily ride is a 6.2 truck. Chris Crawford said he could do the mod on my 3.0 manifold since I have no room for the plates apparently. At least I have an option.

Joshinator99 · 02-27-2023, 08:06 PM

Quote:

Originally Posted by ZO6Ted

My daily ride is a 6.2 truck. Chris Crawford said he could do the mod on my 3.0 manifold since I have no room for the plates apparently. At least I have an option.

Katech was supposedly working in this port injection mod to the Whipple 3.0 runners too, not sure where they are with that.

Katech_Mike · 02-28-2023, 06:24 AM

Quote:

Originally Posted by Joshinator99

Katech was supposedly working in this port injection mod to the Whipple 3.0 runners too, not sure where they are with that.

Still working on it.

Admittedly taking longer than I'd like but we have to clear out some other current projects 1st.

I'm hoping to have it completed in the next few weeks.

adamjwilson · 03-13-2023, 10:52 AM

Getting closer to finishing- man that lid is huge on the 3.0
Need to look for a larger TB as the 95 is dinky- looks like a Katech is in my future.
Anyone running the 120mmTB from Katech? Dan @ Katech says the snout needs to be ported to accommodate the 120mm TB, so 112MM may be a safe bet.

Joshinator99 · 03-13-2023, 01:23 PM

Speaking of Whipple 3.0, look what just arrived…!

adamjwilson · 03-13-2023, 03:22 PM

You gonna like the upgraded version from what I hear....

cjperformance · 03-13-2023, 03:32 PM

Quote:

Originally Posted by Joshinator99

Speaking of Whipple 3.0, look what just arrived…!

Oh, I see they shipped my Whipple 3.0 to you by mistake. I'll just give you my address and you can send it along, k?

Joshinator99 · 03-13-2023, 05:19 PM

Quote:

Originally Posted by cjperformance

Oh, I see they shipped my Whipple 3.0 to you by mistake. I'll just give you my address and you can send it along, k?

Sure LMAO

02-14-2023, 08:34 PM	#156
Nmolina9239 Drives: 2018 2SS Join Date: Sep 2018 Location: Niverville, NY Posts: 117	That idea came up but I was nervous about it bouncing around for some reason. I was going to mount it right in that same location but just off of the shock tower. Made a template for a bracket to cut out using the two bolts that the Whipple fill bottle bracket mounts onto. Thanks for sharing Josh __________________ 2018 Camaro, Whipple Charged, RotoFab Big Gulp, Katech 103mm, LT4 Fueling w/ JMS BAP, GPI Drop in Rods and Pistons, Custom Cam, Ported Heads, Kooks LTHs w/ Green Cats and Mid Pipes, Corsa Extreme Mufflers, DSS Driveshaft & CV Shafts, Might Mouse Catch Can, Circle D T.C. #Team GPI

02-15-2023, 03:38 PM	#158
ZL1Atlanta Drives: 2017 Chevrolet Camaro ZL1 Join Date: Jul 2018 Location: Canton, GA Posts: 405	Vengeance has one of these in stock ready to ship if anyone is looking. Just saw them post it today. It is the polished style and was a replacement for a failed 2.9, but the customer went a different direction I guess. __________________ 2017 ZL1 - PB 8.05 @ 172 MPH @ 3730 lbs @ 70 DA (work in progress) Built by Vengeance Racing, tuned by Elite Tuned

02-27-2023, 02:11 PM	#160
Nmolina9239 Drives: 2018 2SS Join Date: Sep 2018 Location: Niverville, NY Posts: 117	Anyone having any luck with getting Port Injection setup? __________________ 2018 Camaro, Whipple Charged, RotoFab Big Gulp, Katech 103mm, LT4 Fueling w/ JMS BAP, GPI Drop in Rods and Pistons, Custom Cam, Ported Heads, Kooks LTHs w/ Green Cats and Mid Pipes, Corsa Extreme Mufflers, DSS Driveshaft & CV Shafts, Might Mouse Catch Can, Circle D T.C. #Team GPI

02-27-2023, 07:44 PM	#161
ZO6Ted Old badass Drives: 14GMC 2.9 16GMC Turbos 2020Silv.6.2 Join Date: Mar 2020 Location: Arlington Tx Posts: 240	My daily ride is a 6.2 truck. Chris Crawford said he could do the mod on my 3.0 manifold since I have no room for the plates apparently. At least I have an option. __________________ I've had 7 Camaro's. All gone...for now. Current build in progress 2016 GMC4x4 RCSB twin hair dryers ~1k whp fbe port inj 1/8 mi & stealth street terror

03-13-2023, 10:52 AM	#164
adamjwilson Drives: 2022 Camaro 2SS A10 Join Date: Jul 2022 Location: FL Posts: 524	Getting closer to finishing- man that lid is huge on the 3.0 Need to look for a larger TB as the 95 is dinky- looks like a Katech is in my future. Anyone running the 120mmTB from Katech? Dan @ Katech says the snout needs to be ported to accommodate the 120mm TB, so 112MM may be a safe bet. Attached Images __________________ 2022 Camaro 2SS/ Whipple 3.0 / 2"Headers/ PRC LTX Heads/ Forged Internals/LT4 fueling/ DSX Aux/ DSX Flex Fuel/ Meth Injection/ Katech 112 TB/ RotoFab Big Gulp/ Corsa NPP/ Various exterior mods Last edited by adamjwilson; 03-13-2023 at 12:43 PM.

03-13-2023, 01:23 PM	#165
Joshinator99 Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018 Location: Petersham MA Posts: 4,758	Speaking of Whipple 3.0, look what just arrived…! Attached Images __________________ 2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion *1059 WHP/944 WTQ, 9.48@150*

03-13-2023, 03:22 PM	#166
adamjwilson Drives: 2022 Camaro 2SS A10 Join Date: Jul 2022 Location: FL Posts: 524	You gonna like the upgraded version from what I hear.... __________________ 2022 Camaro 2SS/ Whipple 3.0 / 2"Headers/ PRC LTX Heads/ Forged Internals/LT4 fueling/ DSX Aux/ DSX Flex Fuel/ Meth Injection/ Katech 112 TB/ RotoFab Big Gulp/ Corsa NPP/ Various exterior mods

User Name		Remember Me?
Password