03-29-2021, 11:42 AM | #1 |
Drives: 2018 camaro zl1 Join Date: Mar 2018
Location: Rapid city, South Dakota
Posts: 26
|
6th Gen ZL1 Camaro Renegade Axles
Has anyone use or is using this GForce Renegade axles in there 6 gen ZL1 need to know if there good for over 1200 rwhp
|
03-29-2021, 12:08 PM | #2 |
I went with the GForce outlaw axels, never have to worry again!
__________________
2018 ZL1-NFG-A10
New Iron L8T 9.32 147MPH |
|
03-29-2021, 12:35 PM | #3 |
Drives: 2018 camaro zl1 Join Date: Mar 2018
Location: Rapid city, South Dakota
Posts: 26
|
Oh ok thanks the renegade should be about the same I think not to sure.
|
03-29-2021, 01:21 PM | #4 |
It looks like they are both 31 spline.. so I would think they both handle the same amount of power.
The only thing I see different is the CV joints have a couple different things; Isotropic Surface Finish on CV’s and CV Internals Upgraded Premium CV Fasteners
__________________
2018 ZL1-NFG-A10
New Iron L8T 9.32 147MPH |
|
03-29-2021, 03:16 PM | #5 |
Drives: 2018 ZL1 1LE Join Date: Nov 2019
Location: MI
Posts: 10
|
I used gforce on my gto and snapped 2 axles and 1 stub. Switched to Drive Shaft Shop and never had another issue.
|
03-29-2021, 03:23 PM | #6 |
Well that doesnt sound good! I will have to report back once I get to the track and see what this car will do since the upgrades! I did put a DSS driveshaft in it!
__________________
2018 ZL1-NFG-A10
New Iron L8T 9.32 147MPH |
|
03-29-2021, 06:38 PM | #7 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,758
|
That’s the opposite of the Gen6 Camaro experiences from what I’ve read. Multiple failures on this board with DSS driveshafts and axles. I’ve yet to see a single GForce failure. I researched the heck out of this before making my purchases. The GForce stuff is handling over 800 WHP no problem in my case. I guess there can always be examples one way or the other.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
03-29-2021, 09:01 PM | #8 | |
Drives: 2021 Red Hot ZL1 Join Date: Sep 2020
Location: Gapplebees
Posts: 3,092
|
Quote:
|
|
|
|
Post Reply
|
|
|