[blkbeauty16]

Originally Posted by Scottyz

^^^ And your car is otherwise stock besides the tune, e50 and cai?

Yes nothing else done too it and it's also a m6 car.

[blkbeauty16]

I was also on a Nitto 555r with 17 psi.

[Scottyz]

Impressive. Even more so because it’s an M6.
Damn I wish I had taken mine to the track to get a baseline before our shit weather arrived

[blkbeauty16]

I was pretty happy with the results. The 60 ft could of been better but I'm not complaining.

[17CamaroZL1]

Originally Posted by blkbeauty16

The best we could get it too go was 10.543 at 132.70mph.

car was running extremely hot on the supercharger temps so it was pulling 10 degrees of timing. thought it had air in the system so bleed it and still the same thing was beating my head with it. My son works for GM and was finally able too give me a had so he turned on the pump for the supercharger and nothing. We were going to check for power on the pump took my mirror to look for connector and it wasn't even plugged in. We plugged it in and it came on car took a quart and a half of coolant. The temps went down too 120. The car had a new bleeder valve put in by the dealer with 25 miles on it which I guess they never really did because there is no way they could of bleed the system with no pump. The car is currently on e50 and Cai and tuned by Pray.

A buddy of mine was at the track when you ran this and was telling me about it. Very impressive! Nice job!! You need to submit your slip for the bolt on list if you haven't already.

[JonDaddy82]

Originally Posted by blkbeauty16

I was also on a Nitto 555r with 17 psi.

What size did you run? Great pass!

[blkbeauty16]

Originally Posted by 17CamaroZL1

A buddy of mine was at the track when you ran this and was telling me about it. Very impressive! Nice job!! You need to submit your slip for the bolt on list if you haven't already.

I have not summited it. I need too figure out why it's sideways first lol. Thank you also. I had a 16 ss with a P1x and thought that I had made the wrong decision going to the zl1.

[blkbeauty16]

Originally Posted by JonDaddy82

What size did you run? Great pass!

305/35zr20

[JonDaddy82]

Originally Posted by blkbeauty16

305/35zr20

[17CamaroZL1]

Originally Posted by blkbeauty16

I have not summited it. I need too figure out why it's sideways first lol. Thank you also. I had a 16 ss with a P1x and thought that I had made the wrong decision going to the zl1.

The sideways thing is nothing you did wrong. I don't know why, but everything I've ever posted gets turned sideways no matter what I do. I've even tried rotating the picture before uploading, thinking it would rotate and be right, but it looks the same way no matter what I do. One of the moderators can rotate it for you, but its not required.

I bet your SS would fly too. Was it also a manual?

[Scottyz]

Regarding the sideways pics. What I do is edit the picture so basically I rotate it 360 degrees around!!! Yes the picture is upright again just like it was in the first place. Sounds stupid but it works for me. Then I will upload it to my post on here and when I post the picture it shows like it should.
I don’t know why this is or how to edit my picture after I have posted the picture, without deleting it and starting over again.

[17CamaroZL1]

That is crazy, but I'll give it a try. The pics always seem to rotate a 1/4 turn counterclockwise, so I would rotate them 1/4 turn clockwise, thinking that would make them right once posted, but no.

[mlee]

Originally Posted by 17CamaroZL1

That is crazy, but I'll give it a try. The pics always seem to rotate a 1/4 turn counterclockwise, so I would rotate them 1/4 turn clockwise, thinking that would make them right once posted, but no.

I fix them all the time on here. It's the way the camera is held when taking the pic and there is no way to really fix it.

What I do is pull up the pic... rotate it and then use windows Snipping Tool to basically take a screen shot and save that as a different file to upload and I delete the original. It helps Merc not have too much neck strain..

[17CamaroZL1]

Originally Posted by mlee

I fix them all the time on here. It's the way the camera is held when taking the pic and there is no way to really fix it.

What I do is pull up the pic... rotate it and then use windows Snipping Tool to basically take a screen shot and save that as a different file to upload and I delete the original. It helps Merc not have too much neck strain..

So we should hold the phone in the widescreen/landscape position? I thought I had tried that without success, but maybe I'm wrong. Now I have 2 things to try. Thanks!