[Huron Speed]

Originally Posted by ssmofo

Stock trans and rear diff?

On the ZL1? it has a built 10 speed and a stock diff. Has a DSS Driveshaft

[ssmofo]

Righteous.

[z28pat]

Interested to see lt1 results for a daily driven car , let’s say stock intake and just the turbo kit. Im curious what will the graph look like and what kinda numbers you get.
Pretty exciting news !

[Huron Speed]

Originally Posted by z28pat

Interested to see lt1 results for a daily driven car , let’s say stock intake and just the turbo kit. Im curious what will the graph look like and what kinda numbers you get.
Pretty exciting news !

New Era Performance just finished install on a bone stock 2019 SS A8 with our base kit and 6262's. Will have results soon!

[CrazyCatGuy]

Looking forward to results.. What is the lead time for the base kits with 6262's?

[Umbriel]

Originally Posted by CrazyCatGuy

Looking forward to results.. What is the lead time for the base kits with 6262's?

I ordered mine November 6 and haven't received it yet. I think it all depends on what you order though, mine was a maxed out kit with powder coated cold side and ceramic coated hot side with the biggest turbos though.

Sent from my SM-G955U using Tapatalk

[Huron Speed]

Originally Posted by Umbriel

I ordered mine November 6 and haven't received it yet. I think it all depends on what you order though, mine was a maxed out kit with powder coated cold side and ceramic coated hot side with the biggest turbos though.

Sent from my SM-G955U using Tapatalk

Lead times right now depend on the options. Your kit is simply waiting on the turbochargers to finish from Comp which take a little longer due to the anodizing options we added to them. Kit is all done and already coated. Turbosmart components are here in Blue, Intercooler is here and anodized. Almost all ready to ship!

A base kit currently can ship next next day depending on options. We try to always stock some turbos to prevent build times, but with so many options typically we order them with Comp per your order which is a couple week build time depending on options.


Jon

[Huron Speed]

Results in from New Era!

100% bone stock 2019 SS A10 car
91 Octane
Stock Fuel System
Stock Cam
All Stock!
6 psi (tried 10 psi but ran out of fueling on the all stock setup)

584rwhp, 579 rwhp
(+200 rwhp gain over stock with the twin kit being the only modification)


https://www.facebook.com/neweraperfo...0038509070203/

[Scottyz]

That’s stout on 91. Nice

[KingLT1]

I am surprised the fuel system wasn't upgraded to the LT4 so you could stretch this systems legs a little. Pretty much all FI kits are more then capable of tapping out the stock fuel system.

[CrazyCatGuy]

Originally Posted by KingLT1

I am surprised the fuel system wasn't upgraded to the LT4 so you could stretch this systems legs a little. Pretty much all FI kits are more then capable of tapping out the stock fuel system.

Maybe I’m wrong, but I think they’re just showing what this kit does on a 100% stock SS setup and that’s all for now.

King.. I actually would like to pick your brain about fueling soon if you have the time through PM. I enjoy reading all of your insight and am seriously considering this kit, but haven’t nailed down all of the specifics. Would it be ok to pester you sometime?

[Huron Speed]

Originally Posted by KingLT1

I am surprised the fuel system wasn't upgraded to the LT4 so you could stretch this systems legs a little. Pretty much all FI kits are more then capable of tapping out the stock fuel system.

We have already shown this system making 1258 rwhp, so its capabilities are certainly there in regards to making power. We had a lot of requests to see what it would do on a stock car opposed to a 416ci with a PI system so here we have it, both ends of the spectrum! A bone stock SS at 584 rwhp and a built engine, Port Injection ZL1 making 1258 rwhp. Whatever your needs and goals are, this system can provide!

The car at New Era will be done in phases so I am sure you will see more progression from that build to come, this was the base starting point

[KingLT1]

Originally Posted by CrazyCatGuy

Maybe I’m wrong, but I think they’re just showing what this kit does on a 100% stock SS setup and that’s all for now.

King.. I actually would like to pick your brain about fueling soon if you have the time through PM. I enjoy reading all of your insight and am seriously considering this kit, but haven’t nailed down all of the specifics. Would it be ok to pester you sometime?

anytime!

Originally Posted by Huron Speed

We have already shown this system making 1258 rwhp, so its capabilities are certainly there in regards to making power. We had a lot of requests to see what it would do on a stock car opposed to a 416ci with a PI system so here we have it, both ends of the spectrum! A bone stock SS at 584 rwhp and a built engine, Port Injection ZL1 making 1258 rwhp. Whatever your needs and goals are, this system can provide!

The car at New Era will be done in phases so I am sure you will see more progression from that build to come, this was the base starting point

[ZarusSS]

Originally Posted by Huron Speed

Results in from New Era!

100% bone stock 2019 SS A10 car
91 Octane
Stock Fuel System
Stock Cam
All Stock!
6 psi (tried 10 psi but ran out of fueling on the all stock setup)

584rwhp, 579 rwhp
(+200 rwhp gain over stock with the twin kit being the only modification)


https://www.facebook.com/neweraperfo...0038509070203/

Would there be any adverse affects on any of the stock parts when putting out this much HP?