10-09-2019, 06:40 AM | #1 |
Drives: 2020 Camaro ZL1 6-speed Join Date: Oct 2019
Location: California
Posts: 12
|
ZL1 help
What’s up everyone
I recently purchased a 2020 ZL1. I absolutely love this car. It is a beast on the road. I decided to go with the ZL1 over the 1LE because I enjoyed the way the ZL1 felt as a day to day driver. With that said, I really love the way the 1LE looks. I’ve been looking around and I’ve found some parts that I want to put on. I’ve been looking a lot at Anderson Composites. I recently reached out to them to see if their 1LE parts would fit on my ZL1. To my surprise I was told that they don’t. Everything that I’ve looked at has suggested that most of the parts will fit, with little to no modification to my car. I was hoping someone on here could help me out and maybe point me in the right direction for parts. |
10-09-2019, 07:10 AM | #2 |
Drives: 18 zl1 Join Date: Aug 2017
Location: central alabama
Posts: 935
|
you can get the front grill, splitter, dive planes, and rear wing from the zle, and put them on your car (stock gm parts), and it will, other than the suspension and wheels/tires, look almost indistinguishable from the zle
|
10-09-2019, 07:33 AM | #3 |
Drives: 2020 Camaro ZL1 6-speed Join Date: Oct 2019
Location: California
Posts: 12
|
So stock parts can fit just fine then. That’s what I thought. Anything aftermarket won’t then. My other question was, would you know if there is a difference between the 2019 and 2020? I’m looking at some exhausts (corsa) but they don’t know if the 2019 would fit on a 2020.
|
10-09-2019, 07:33 AM | #4 |
Drives: Fast Join Date: Mar 2015
Location: Michigan
Posts: 3,696
|
Go OEM.
Also, no difference in exhaust. I highly recommend the Corsa systems. I run one on mine and there's nothing I would change. |
10-09-2019, 07:34 AM | #5 |
Drives: 2020 Camaro ZL1 6-speed Join Date: Oct 2019
Location: California
Posts: 12
|
And do you have part numbers? In case I decide to go the stock route.
|
10-09-2019, 07:38 AM | #6 | |
Drives: 18 zl1 Join Date: Aug 2017
Location: central alabama
Posts: 935
|
Quote:
23329728 deflector left 23329729 deflector right 84375811 front grille a1z 84277493 bezel right 84277492 bezel left 23329727 dive plane right 23329726 dive plane left 84244390 bottom deflector 11610157 nut for splitter 11609456 screw for splitter you'll have to remove your bumper, and on the inside you should have slots showing you where to cut for the dive planes. |
|
10-09-2019, 07:40 AM | #7 | |
Thank you Al Oppenheiser!
Drives: Red Hot A10 ZL1 Convertible Join Date: Jun 2017
Location: Sarasota, FL
Posts: 4,975
|
Quote:
https://www.camaro6.com/forums/showthread.php?t=508780 Parts lists starting around post #32, 33 and continuing on: https://www.camaro6.com/forums/showt...83#post9964483 |
|
10-09-2019, 07:45 AM | #8 |
Drives: 2020 Camaro ZL1 6-speed Join Date: Oct 2019
Location: California
Posts: 12
|
Do you guys know where I can look at carbon fiber stuff? Also thanks for the help. You guys are awesome
|
10-09-2019, 12:30 PM | #9 |
Drives: E92 BMW M3 Join Date: Oct 2012
Location: Houston
Posts: 4,496
|
__________________
SOLD - 2013 1LE - Pat G Spec'd Cam, NPP with 1 7/8" Long Tube Headers with High Flow Cats, Intake w/scoop, Ported Throttle Body, and Apex 1.25" Lowering Springs.
J-Rod Built and Matt@FSP Tuned |
10-09-2019, 01:58 PM | #10 |
Account Suspended
Drives: '14 Jetta 1.8, '19 1SS Join Date: Mar 2010
Location: San Diego
Posts: 886
|
Purposely uglifying your car? The regular ZL1 looks awesome...way better than the 1LE IMO.
The spoiler on the 1LE looks like someone made it in their garage or stole it off a Civic. And those fins in the front? Cheesy looking to say the least. Regular ZL1 looks stealthy and strong. |
10-09-2019, 07:24 PM | #11 | |
Drives: 2020 Camaro ZL1 6-speed Join Date: Oct 2019
Location: California
Posts: 12
|
Quote:
|
|
10-09-2019, 08:35 PM | #12 |
Drives: Wild Cherry LT1 Join Date: Dec 2016
Location: Massachusetts
Posts: 1,925
|
|
10-09-2019, 09:58 PM | #13 |
Drives: ZL1/1LE parts added Join Date: May 2018
Location: Somewhere around Texas pines tress and smooth asphalt
Posts: 609
|
Congratulations !
Last edited by Revalot; 10-10-2019 at 05:20 AM. |
10-09-2019, 10:45 PM | #14 |
Congratulations Sealous! Good luck with the build, and please keep us in the loop on your progress.
Last edited by Pupilbone; 10-10-2019 at 05:47 AM. |
|
|
|
Post Reply
|
|
|