02-16-2016, 09:11 AM | #1 |
Drives: 2013 Inferno Orange Camaro 1SS Join Date: Jan 2016
Location: Accokeek MD
Posts: 7
|
Eagle eye LED conversion
Is it possible to put a LED drl H 9/11/13 into the eagle eye headlights ? HID's are not being reliable for me so I was thinking about switching over. If anyone has done this or know about fittment Ect any advice would be greatly appreciated.
|
02-17-2016, 11:08 AM | #2 |
S1N1STR
|
What's wrong with the HIDs?
|
02-17-2016, 12:14 PM | #3 |
El Duderino
|
Maybe you are not getting good quality HID's?
Best deal on the best quality OSRAM HID I have found: http://www.walmart.com/ip/Sylvania-H...D1SSZ/44410313
__________________
I bowl. Drive around. The occasional acid flashback.
|
02-17-2016, 07:28 PM | #4 |
Drives: 2013 Inferno Orange Camaro 1SS Join Date: Jan 2016
Location: Accokeek MD
Posts: 7
|
HID's flicker, sometimes go in and out. I figured I need a better quality set but I know people who have HID kits that have always had problems. I was hoping the LED's may be more reliable. I am purchasing something new either way just wanted to get the most reliable product.
|
02-17-2016, 07:33 PM | #5 | |
BCS Auto
|
Quote:
__________________
|
|
02-17-2016, 09:20 PM | #6 |
S1N1STR
|
Where did you get them?
|
02-17-2016, 09:54 PM | #7 |
BUMBL Z
|
+1 on dropping the cash for high quality stuff. stay away from the cheap stuff, and HIDs will do you plenty justice. Besides, throwing an LED kit in a projector always produces mixed results. Remember, these will be lighting the road for you at night, why skimp on something that will allow you to see at night? (not saying this is the case)
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
02-18-2016, 09:59 AM | #8 |
Drives: 2013 Camaro 2LS Join Date: Feb 2013
Location: Fort Lauderdale, FL
Posts: 187
|
Get these http://www.amazon.com/gp/product/B00...ilpage_o03_s00
I have eagle eyes, and bought this set. Literally plug & play. No flickering. High/Low beams work perfectly. And you do not need to tap into the battery like some HID kits have you do. I got the 6000K version, and it looks amazing. Very white, with a slight hint of blue. If you want the stock OEM RS headlight look, you would want to choose 4300K. |
02-18-2016, 05:22 PM | #9 | |
BUMBL Z
|
Quote:
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
|
02-18-2016, 06:28 PM | #10 |
S1N1STR
|
I agree. You get what you pay for.
|
02-18-2016, 07:45 PM | #11 |
BCS Auto
|
Well I'm still running on my set of $35 Kensun HIDs....few months now. Pathogen is also still running his almost a year later. Gotta get lucky I guess, but Kensun will replace defective products until you're happy, should the need arise.
__________________
|
02-27-2016, 08:17 AM | #12 |
Drives: 2013 Inferno Orange Camaro 1SS Join Date: Jan 2016
Location: Accokeek MD
Posts: 7
|
http://www.automotivelightstore.com/...mentBulbs.aspx
Reached out to Oracle and Phasket and these were lights they said are compatable with Eagle Eyes. This was the explanation : The H13 bulbs will fit in the factory Non-RS housing, the H11/H9 bulbs will fit in the Eagle Eye housing. The connections will still remain the same with the Eagle Eye harness to the car but the inside of the housing has a H11/H9 connection. Sadly still haven't made a decision though �� |
02-27-2016, 07:35 PM | #13 |
Account Suspended
Drives: 2010 Camaro 1SS LS3 Join Date: Jan 2015
Location: Riverside, CA
Posts: 4,018
|
I'm wearing LED light bulbs with my Eagle Eyes. Love em... will get them again if needed
http://www.amazon.com/gp/product/B01...ilpage_o08_s00 |
02-28-2016, 08:03 PM | #14 |
Drives: 2013 Inferno Orange Camaro 1SS Join Date: Jan 2016
Location: Accokeek MD
Posts: 7
|
Hey would you be kind enough to post a pic of how they look with LED's ?
|
|
|
|
|