09-14-2019, 04:56 AM | #1 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
|
Racing Demonolgy Today-Youtube Star
I got invited to a Mopar Event today in St Louis. I'm racing plus I have a Grudge Race with Herman Young and his car is called Demonology plus I'll be running some other classes, one will be Mopar vs the World. I'm going to see if I can take down a bunch of Mopar's today. Should be good air compared to my recent outings. I'll post up later tonight once I get back home. Hopefully I'll see some 9.30s
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
09-14-2019, 05:25 AM | #2 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,701
|
Sounds like you’ll have your hands full today. Good luck! I want to see a huge Mopar kill list!
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
09-14-2019, 05:47 AM | #3 |
Drives: 17 ZL1 Join Date: Mar 2017
Location: VA
Posts: 1,075
|
Good luck!!!
__________________
2017 ZL1 Coupe M6, Red Hot
Mods; AFE Pro 5R CAI, Kong Ported Blower and Snout, NW 103 TB, Griptech 2.31 Upper, Kooks 2",JMS Voltage Booster, Flex Fuel, Mighty Mouse CC,Jannetty Racing Tune, 680 rwhp |
09-14-2019, 07:36 AM | #4 |
Two Lane Blacktop
Drives: '18 Camaro 2SS Join Date: Jul 2019
Location: Black River, NNY
Posts: 516
|
Good luck, go show your Chevy taillights to a bunch Of Mopars
|
09-15-2019, 08:21 PM | #5 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
|
I showed it to a bunch but not Demonology. My boost a pump failed after my burnout on my last qualifying pass for Modern Muscle. I thought it was just the fuse but when I replaced it still wouldn't start. Checked the hot side of the pump and no go. So never got to run him and made only one good pass of 9.45@147 1.38 60ft. Every pass after that couldn't get it to hook and I did to back to back passes and on the second pass with no cool down the boost a pump took a shit. Tomorrow I'll bypass it and make sure that's what it is. Its a Megavolt that's made some place in California that makes the Kenny Belle also. I don't have a race till October so I have plenty of time to work it out. Just sucks cause he was running low 9.40's so it would have been a good race. He did make one pass early in the morning in the upper 9.20s but after that all 9.40's.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
Post Reply
|
Thread Tools | |
|
|