[17CamaroZL1]

Originally Posted by big dave

Like you told me when I was on top, I knew you were getting lonely all up there by yourself. lmbo!! I'm perfectly happy being in 2nd place as long as I'm on this side of the fence. lol!!

Lol!! I'm lonely no more. Sometimes the grass actually is greener on the other side. Glad you made it over.

[big dave]

Originally Posted by 17CamaroZL1

Lol!! I'm lonely no more. Sometimes the grass actually is greener on the other side. Glad you made it over.

Thanks buddy, now for the quest to run 10.8s stock .

[17CamaroZL1]

Originally Posted by big dave

Thanks buddy, now for the quest to run 10.8s stock .

Lol!! You're welcome. You deserve it buddy.

[big dave]

Originally Posted by Lt1z350

Now driving on even just a tune I don’t know what I waited this long. Even if something did break I wouldn’t let any dealship monkeys work on my 70k car anyway so what’s the point. See horror stories of them taking 5 trips with chevy cruize to get a water pump right probably tear one of these up good.BUT. Not one has broke and been talked about to date. Anyway sure your like me and about out of Tires now so once you change them the car is no longer stock according to this forum so kicked off the list anyway. Go watch the video of the bolt on z slottering a demon from a roll then might want that tune a little more lol. Car is nothing crazy just cold air e85 tune lower pulley headers. Made 720whp and put buss lengths on the demon in 3 gears. Pretty good video.

I may consider a tune in the future, but for now, since i already have an intake sitting in the box, that and a throttle body may be my only mods for a while. Surprisingly, I still have a lot of tread on my tires. I do have a bunch of passes on them though. I'll probably replace them with the same tires when it's time. I have to keep an eye out for that video.

[17CamaroZL1]

Originally Posted by Lt1z350

Now driving on even just a tune I don’t know what I waited this long. Even if something did break I wouldn’t let any dealship monkeys work on my 70k car anyway so what’s the point. See horror stories of them taking 5 trips with chevy cruize to get a water pump right probably tear one of these up good.BUT. Not one has broke and been talked about to date. Anyway sure your like me and about out of Tires now so once you change them the car is no longer stock according to this forum so kicked off the list anyway. Go watch the video of the bolt on z slottering a demon from a roll then might want that tune a little more lol. Car is nothing crazy just cold air e85 tune lower pulley headers. Made 720whp and put buss lengths on the demon in 3 gears. Pretty good video.

I saw that video. I didn't know what was done to the Z, but it was killing the Demon. The first several hits, the Z driver got the hit, and it was lights out. I kept waiting to see what might happen when the Demon got the hit, and it finally happened toward the end, and the Z still pulled it. Good stuff.

So you have a tune on yours now? If so, I look forward to your logs and results at the track.

Just to prevent any confusion about tires, as long as the factory original brand and model of tire is put back on the car, it still qualifies for the stock list.

[9seconds]

2016 Camaro 2SS, A8, D1SC ProCharger, Stock displacement (built by myself) Manley crank, Rods, Pistons 10.5:1 cr Frankenstein heads, stainless works full exhaust, Bullet custom cam, dual meth injection, Z06 DI fuel pump, FTI torque converter (they are the best) G-Force axles & driveshaft, Carlyle rear suspension, on 17" Weld Racing S76 series. Stock intake, stock gears and weighs 4005 pounds.

[laynlo15]

Wow, nice pass 9second.

[Merc]

Updates this weekend!

[PRAY]

Originally Posted by 9seconds

2016 Camaro 2SS, A8, D1SC ProCharger, Stock displacement (built by myself) Manley crank, Rods, Pistons 10.5:1 cr Frankenstein heads, stainless works full exhaust, Bullet custom cam, dual meth injection, Z06 DI fuel pump, FTI torque converter (they are the best) G-Force axles & driveshaft, Carlyle rear suspension, on 17" Weld Racing S76 series. Stock intake, stock gears and weighs 4005 pounds.

Attachment 926778

Dang, I feel your 10.00 pain. This was done with the complete stock long block, stock suspension, headers, Circle D, P1X. 16' 2SS 3,950lbs. Get that 9 next time out. Great build.

[MarkMc26]

Originally Posted by Merc

Updates this weekend!

Thank you for all of the time and effort that you put into this list!

Mark

[17CamaroZL1]

Originally Posted by PRAY

Dang, I feel your 10.00 pain. This was done with the complete stock long block, stock suspension, headers, Circle D, P1X. 16' 2SS 3,950lbs. Get that 9 next time out. Great build.

So close!!! Awesome times! You'll get it.

[9seconds]

Yes, it has a phase limiter, I drive it every day. Average fuel mileage is 16.5-17.1

[9seconds]

Thanks guys and gals for the compliments.

[9seconds]

Originally Posted by laynlo15

Wow, nice pass 9second.

Thank you