Tactical Garage SS Whipple Build - Page 7

steelheadrob · 10-01-2018, 10:29 PM

Thanks. Fronts are the stock 20s. Rears are 17s with drag radials, but only a few pounds lighter than stock in the rear. Looking at going to skinnies in the front and changing to the MT Rs in the rear next spring will save me 80lbs of rolling weight should get me down into the 10.5s.

steelheadrob · 10-20-2018, 10:17 AM

Video on installing the 1 7/8" Texas Speed header with the catted connection pipe. Cold start sound clip at end of video.

Want1 · 10-25-2018, 01:05 PM

Quote:

Originally Posted by steelheadrob

Thanks. Fronts are the stock 20s. Rears are 17s with drag radials, but only a few pounds lighter than stock in the rear. Looking at going to skinnies in the front and changing to the MT Rs in the rear next spring will save me 80lbs of rolling weight should get me down into the 10.5s.

Oh, ok. But yeah, I have no doubt you'll get it!!

steelheadrob · 11-04-2018, 08:04 PM

Got my AEM wideband installed. See video for details.

steelheadrob · 12-30-2018, 09:58 PM

Planning on adding Alky Control Meth Injection & Flex Fuel.

See video for details.

steelheadrob · 01-13-2019, 10:01 PM

Final got around to adding a Catch Can. I went with the K-Motors have not seen anyone else do this one. More details in the video.

steelheadrob · 01-20-2019, 02:04 PM

I have started the installation of the Alky Control Meth Injection Kit. First step was trying to figure out how to remove the front fender without removing the front bumper. Video shows how I got it done.

steelheadrob · 03-26-2019, 09:59 PM

Spring is finally here just wrapped the install of the Alky Control Meth Injection Kit. Full install video below.

steelheadrob · 04-04-2019, 08:08 AM

Got the flex fuel kit installed on the car. Time to starting testing different levels of E content fuel.

steelheadrob · 04-07-2019, 09:11 PM

Flex Fuel is enabled in HP Tuners. Currently running E50. Cant wait to get to the track once it stops raining.

steelheadrob · 04-13-2019, 01:58 PM

Did some data logs comparing the air fuel ratio with and without the meth injection spraying.

CruzySS · 04-13-2019, 04:10 PM

Nice videos! Keep it up

grampa_ss · 04-13-2019, 04:33 PM

Nice job!

steelheadrob · 04-14-2019, 07:58 PM

Quote:

Originally Posted by CruzySS

Nice videos! Keep it up

Quote:

Originally Posted by grampa_ss

Nice job!

Thanks. I got quite a few tuning type videos planned. And hopefully the related track results, first two track days of the year were rained out. Next scheduled day is two weeks from now if it stays dry.

10-01-2018, 10:29 PM	#85
steelheadrob Tactical Garage Drives: 2016 Camaro 2SS Join Date: Nov 2016 Location: Idaho Posts: 427	Thanks. Fronts are the stock 20s. Rears are 17s with drag radials, but only a few pounds lighter than stock in the rear. Looking at going to skinnies in the front and changing to the MT Rs in the rear next spring will save me 80lbs of rolling weight should get me down into the 10.5s. __________________ Tactical Garage YouTube Channel Whipple Build Member Car Journal Whipple, LT4 Fueling, Headers, Rotofab, DRs/Skinnies, Meth, E55 10.17@135.91 (@3,607 DA) Whipple with LT4 Fueling & Headers Dyno 657hp/650tq (5th Gear Dyno Dynamics)

04-13-2019, 04:33 PM	#97
grampa_ss Drives: 2016 Camaro 2SS Join Date: Apr 2017 Location: Stansbury Park, Utah Posts: 1,092	Nice job! __________________ 2016 2SS, MRC, NPP, A8. Procharger P-1X,Stage II,std bypass, 3.9, Alky Meth - 10.84 @129 - DA+2000 New Mods - GPI drop ins, Kooks 2", LT4 fueling, Cam, Circle D Converter, 3.5 pulley & dual nozzle meth.

04-13-2019, 04:10 PM	#96
CruzySS Drives: 2016 Camaro 2ss Join Date: May 2017 Location: Annandale MN Posts: 588 View My Garage	Nice videos! Keep it up

User Name		Remember Me?
Password