C7Carbon | 6gen Camaro Rear Diffuser Race Edition | 3D Design Project - Chime in!! - Page 4

ChadFarr · 11-01-2017, 02:00 PM

Quote:

Originally Posted by Rsblueblood

Looks great, just not understanding why nothing for duel when the demand is higher.

I think because most of the aftermarket exhaust systems are Quad tips and NPP.

Sent from my iPhone using Tapatalk

C7 Carbon · 11-01-2017, 06:31 PM

Thanks for the feedback everyone! let's hear some more

Arugon · 11-01-2017, 06:41 PM

Quote:

Originally Posted by Rsblueblood

Looks great, just not understanding why nothing for duel when the demand is higher.

I dont think the demand is very high, I just think the people who want the dual are louder since us quad tip guys already have options to choose from.

Still think it would be a good move on whoever makes one for dual setups first.

C7 Carbon · 11-02-2017, 01:27 PM

PMs replied

Corner carver · 11-05-2017, 08:21 AM

I think manufacturers are dropping the ball on not offering a single exit rear valence for the 2.0t guys...lots of us have made noise on everyone of these rear valence threads to no avail.

Noticed that Tomie power now offers a single exit 3" titanium cat-back for the ecoboost mustang...here's hoping they step up for the Chevy turbo lovers also.

C7 Carbon · 11-07-2017, 12:42 PM

Thanks again for the input guys! PMs replied

Adam6 · 11-08-2017, 08:42 PM

Looks amazing, the rounder exits are better. Hopefully this can square out the rear end. The rear is much too rounded in at the bottom. I'm 50/50 on the side extensions on this vs the original render. This one would look perfect with side skirts but not sure if it would look a little off without them.

FATTEMUNK · 11-09-2017, 06:00 PM

Quote:

Originally Posted by Adam6

Looks amazing, the rounder exits are better. Hopefully this can square out the rear end. The rear is much too rounded in at the bottom. I'm 50/50 on the side extensions on this vs the original render. This one would look perfect with side skirts but not sure if it would look a little off without them.

Almost all the cars I have seen on this forum have side skirts and if not they are next on the owners list. Still might be an interesting proposition for guys who dont want to run side skirts

PackersFan26 · 11-11-2017, 09:21 AM

I think the fins are just a tad too long. Other than the that if you guys release a satin black version I’ll buy it along with your satin sideskirts

PackersFan26 · 11-13-2017, 01:01 PM

Any word of a possible release date?

C7 Carbon · 11-13-2017, 04:53 PM

We don't have a release date yet for this diffuser, but we'll make sure to keep you updated as soon as we have news on this.

C7 Carbon · 11-17-2017, 06:17 PM

PMs replied

ModdedSS · 12-04-2017, 03:31 PM

Any updates? Ordered ZL1 style front splitter and side skirts. Just need a rear diffuser now

C7 Carbon · 01-17-2018, 11:24 AM

Hi guys, thanks again for bearing with us. Our design team is working on this project and we'll have some exciting updates very soon. Stay Tuned!

11-05-2017, 08:21 AM	#47
Corner carver Drives: 2017 Camaro 2.0T RS Join Date: Jul 2016 Location: Ontario Posts: 1,827	I think manufacturers are dropping the ball on not offering a single exit rear valence for the 2.0t guys...lots of us have made noise on everyone of these rear valence threads to no avail. Noticed that Tomie power now offers a single exit 3" titanium cat-back for the ecoboost mustang...here's hoping they step up for the Chevy turbo lovers also. __________________ As Delivered: 2017 Mosaic Black 1LT RS 2.0T \| M6 \| HD brake and cooling \| Bose & 8"screen \| Front lip extension \| Blade spolier \| Black bowties \| Painted splash guards Installed Mods: 25% Window tint \| Headlight, side marker and third brake light Phastek tint kit \| GM black taillights with Gen5diy LED harness and bulbs \| LED license plate bulbs \| Gorilla lug nuts, black \| GM 'performance' center caps \| RS and sheild badges removed

11-11-2017, 09:21 AM	#51
PackersFan26 Drives: 2017 Summit White 2SS Join Date: Jan 2017 Location: Dublin, CA Posts: 546	I think the fins are just a tad too long. Other than the that if you guys release a satin black version I’ll buy it along with your satin sideskirts __________________ Follow me on IG: @lip_stick.ss

11-13-2017, 01:01 PM	#52
PackersFan26 Drives: 2017 Summit White 2SS Join Date: Jan 2017 Location: Dublin, CA Posts: 546	Any word of a possible release date? __________________ Follow me on IG: @lip_stick.ss

11-13-2017, 04:53 PM	#53
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	We don't have a release date yet for this diffuser, but we'll make sure to keep you updated as soon as we have news on this. Last edited by C7 Carbon; 11-17-2017 at 06:16 PM.

12-04-2017, 03:31 PM	#55
ModdedSS Drives: 2017 Camaro SS 1LE Join Date: Nov 2015 Location: Atlanta, GA Posts: 148	Any updates? Ordered ZL1 style front splitter and side skirts. Just need a rear diffuser now __________________ Show: C7 Carbon ZL1 Front Splitter/C7 Carbon ZL1 Side Skirts/Diode Dynamics LED Sidemarkers/Tinted Headlights, Fog Lights, and Rear Reflectors/20" Forgestar F14's in Bronze Burst Go: 17" Forgestar F14s in Bronze Burst with Hoosier Drag Radials/Rotofab Intake w/ Dry Filter/EFI Flex Fuel Kit/Kooks 2" Longtubes with Offroad Connections/PRAY Performance Ported Intake Manifold/PRAY Performance Ported Throttle Body/PRAY Performance Ported Heads/PRAY Performance Tune Suspension: Phastek Lowering Springs/BMR Toe Rods/BMR Control Arms/BMR Trailing Arms/BMR Strut Tower Brace

11-01-2017, 06:31 PM	#44
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	Thanks for the feedback everyone! let's hear some more

11-02-2017, 01:27 PM	#46
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	PMs replied

11-07-2017, 12:42 PM	#48
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	Thanks again for the input guys! PMs replied

11-08-2017, 08:42 PM	#49
Adam6 Drives: 2017 Camaro 1SS Join Date: Apr 2017 Location: Florida Posts: 21	Looks amazing, the rounder exits are better. Hopefully this can square out the rear end. The rear is much too rounded in at the bottom. I'm 50/50 on the side extensions on this vs the original render. This one would look perfect with side skirts but not sure if it would look a little off without them.

11-17-2017, 06:17 PM	#54
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	PMs replied

01-17-2018, 11:24 AM	#56
C7 Carbon Drives: Camaro Join Date: Aug 2013 Location: San Diego Posts: 1,329	Hi guys, thanks again for bearing with us. Our design team is working on this project and we'll have some exciting updates very soon. Stay Tuned!

User Name		Remember Me?
Password