08-03-2021, 03:37 PM | #15 |
Drives: 17 2SS, 8L90, Cam, Heads, E85 Join Date: Dec 2016
Location: US
Posts: 1,200
|
So I can confirm it works again with the stock torque converter 100%. It could be that I didn't replace the turbine seal oring when I put the circle D on and I did when I just put the stock converter back in, but I highly doubt this as there was zero damage to the oring when I pulled the Circle D converter out.
|
|
|
Post Reply
|
|
|