08-18-2018, 03:52 PM | #29 |
Drives: Camaro Join Date: Jun 2018
Location: Arkansas
Posts: 41
|
Guys need your suggestions
1. Did anyone install front cam on their car ? I want to install 360 degrees cam or front cam 2. which fuel is better to use ? unleaded /unleaded plus or premium? 3. Anyone who is from Arkansas or Missouri? I want to know if anyone know places who can install ground effects or rear diffuser /dash cam /protective film |
08-19-2018, 08:11 PM | #30 |
Drives: 2018 1LT RS V6 A8 Convertible Join Date: Sep 2017
Location: USA
Posts: 497
|
I elected to go without protection and keep the money for my next Camaro as it adds no value other than peace of mind. I instead invested 12 bucks in a bottle of code GD1 Hyper Blue touch up paint. Chips are going to happen, especially if you do a lot of highway driving but if you are cautious you can keep them to a minimum. I've learned to try my best to avoid door dings chips and scratches, but it's a car and you will never keep it perfect. Someone or something is bound to mess it up sooner or later, so don't sweat the small stuff and enjoy ! As for the fuel anything other than 87 octane is money down the toilet with the V6.
|
08-19-2018, 08:18 PM | #31 |
Drives: 2018 2SS Camaro Hot Wheels Edition Join Date: Sep 2015
Location: Cleveland, Ohio
Posts: 2,814
|
Congrats. Welcome to the club..Car looks great. Love the hyper blue
__________________
Zack46
2018 Camaro 2SS Orange Crush Hot Wheels Limited Edition Power Sunroof, 8 Speed Auto/Remote Start, NPP Exhaust Production Sequence Number 98 NEOCC Camaro Club Member Former Ride: 2016 Camaro 2LT RS V6 Hyper Blue Metallic |
08-19-2018, 11:30 PM | #32 | |
Drives: 2024 ZL1 M6, 1969 Cessna Skylane Join Date: Jun 2018
Location: Dallas
Posts: 368
|
Quote:
|
|
08-24-2018, 06:09 PM | #34 |
Drives: Camaro Join Date: Jun 2018
Location: Arkansas
Posts: 41
|
Suggestions on Front splitter RPI designs SS replica RS splitter vs ACS composite 48-4-007? I dont want drill any holes i want the perfect fitting model
|
08-31-2018, 10:13 PM | #35 |
Drives: Camaro Join Date: Jun 2018
Location: Arkansas
Posts: 41
|
Got PPF done with Xpel. Should have got it done in the first week of buying the car. I already got one rock chip near the front part of rear wheel.
Front Bumper + Hood + Rocker Panels + Mirrors+ Hallow space behind Door Handles + edges of the doors + Small area behind rear wheels = $1500 Also got little bit of paint correction and CQuartz 3.0 Ceramic coat > Black Bowtie > Tinted Side markers > ZL1 Addons Rock Guards > Tinted Third break lights > light dark tinted tail lights > Uniden R3 Radar with Gen5Diy hardwired with rear mirror mount |
08-31-2018, 11:46 PM | #36 |
Drives: 2018 2SS Camaro Hot Wheels Edition Join Date: Sep 2015
Location: Cleveland, Ohio
Posts: 2,814
|
CAR is sick looking!
Well done.
__________________
Zack46
2018 Camaro 2SS Orange Crush Hot Wheels Limited Edition Power Sunroof, 8 Speed Auto/Remote Start, NPP Exhaust Production Sequence Number 98 NEOCC Camaro Club Member Former Ride: 2016 Camaro 2LT RS V6 Hyper Blue Metallic |
09-03-2018, 10:44 AM | #37 |
Drives: Camaro Join Date: Jun 2018
Location: Arkansas
Posts: 41
|
Any suggestions on GM cold air intake ?
|
09-05-2018, 08:39 PM | #38 |
Drives: Camaro Join Date: Jun 2018
Location: Arkansas
Posts: 41
|
Got my ZL1 Addons rear diffuser and installed it. They have provided 2 bolts to drill and bolt them but would have been better if they provided another 2 long screws for replacement of OEM short screws that are already on the bumper
|
09-07-2018, 09:13 PM | #39 |
Drives: Camaro Join Date: Jun 2018
Location: Arkansas
Posts: 41
|
RPI Designs SS replica splitter
Finally installed my Front replica splitter after wrapping it with Satin black Vinyl
|
09-20-2018, 08:31 PM | #40 |
Drives: Camaro Join Date: Jun 2018
Location: Arkansas
Posts: 41
|
Came home to this Beauty waiting at my door step. Any suggestions on installation? Is the installation easy? Can i do on my own or do you guys recommend to get it done by Mechanic.
Couldnt find a clear video of installing this on Camaro gen 6 |
09-23-2018, 03:34 PM | #41 |
Drives: Camaro Join Date: Jun 2018
Location: Arkansas
Posts: 41
|
Done installing K&N cold air intake
|
|
|
Post Reply
|
|
|