05-06-2021, 09:29 PM | #1 |
Drives: 2012 Camaro 1LS Join Date: Apr 2021
Location: Jacksonville, FL
Posts: 31
|
Why are my inside tail lights off when driving?
I could have sworn all 4 of my tail lights would be on at all times at night. I checked today and only my outside ones light up. When I brake or turn my hazards on they all light up. Am I going crazy?
|
05-06-2021, 10:53 PM | #2 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,569
|
They should all be on when the headlights are on. Have you checked the bulbs? A new 2-pack of Sylvania 3157 bulbs are like $8 at the auto parts store. The 3157 is a dual filament bulb, where the tail filament is always lit when the lights are on, and the second filament is the brake light filament. Maybe your inner bulbs burned out the normal tail light filaments.
As for your tail light configuration, when working properly, all four are tail lights, all four are brake lights, and all four are turn signals.
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
05-07-2021, 05:06 AM | #3 |
Drives: 2012 Camaro SS Join Date: Dec 2019
Location: New York
Posts: 1,434
|
I agree start with swapping the bulbs or popping new ones in. Check the connections in the trunk too just in case but probably the bulbs.
__________________
2012 Camaro 2SS/RS - CSP Custom Cam 232/240 .615/.615 113 +3, Texas speed CNC heads, FTI billet triple disc converter, K&N cai, Katech ported TB, GPI Ported/rod modded manifold, Texas speed 1 7/8 headers, HFC, Flowmaster 2 chambers with x pipe, Mishimoto CC, MSD wires, Roto fab washer relocation, tru cool 40k trans cooler, apex scoop, Pedders extreme coil overs and much more!!
|
05-07-2021, 07:49 AM | #4 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,297
|
Agreed with the above all. I would replace ALL the bulbs, not just the inner ones, this way you have all 4 new, and go from there. Good luck..
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
05-07-2021, 09:45 AM | #5 |
Drives: IOM 2013 2SS/RS, Greenie, 06 FXSTBi Join Date: Apr 2009
Location: Turd Town, WI
Posts: 1,583
|
I saw this same OP start a thread concerning trunk gaps and it was obvious the car has been hurt and repaired. I agree with everyone else, start with the simple and new bulbs, but once damaged it could be numerous things. Hope your fix is cheap and simple!
|
05-07-2021, 12:08 PM | #6 |
Drives: 2012 Camaro 1LS Join Date: Apr 2021
Location: Jacksonville, FL
Posts: 31
|
Yeah the old owner had an accident it and repainted it white. Ive had the car for a few months and am trying to fix it up a bit. They did a terrible paint job and not to mention the trunk is misaligned. If the new bulbs don't fix it I guess theres a problem with the wiring.
|
05-07-2021, 12:11 PM | #7 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,297
|
Maybe they forgot to re connect the inside plugs for the inside set of lights??
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
05-07-2021, 12:32 PM | #8 |
Drives: 2012 Camaro SS Join Date: Dec 2019
Location: New York
Posts: 1,434
|
That’s what I did. My wife was like “why replace all 4 when 1 went out”? I said so they are all the same brightness lol and replaced with led bulbs
__________________
2012 Camaro 2SS/RS - CSP Custom Cam 232/240 .615/.615 113 +3, Texas speed CNC heads, FTI billet triple disc converter, K&N cai, Katech ported TB, GPI Ported/rod modded manifold, Texas speed 1 7/8 headers, HFC, Flowmaster 2 chambers with x pipe, Mishimoto CC, MSD wires, Roto fab washer relocation, tru cool 40k trans cooler, apex scoop, Pedders extreme coil overs and much more!!
|
05-07-2021, 02:42 PM | #9 | |
Drives: 2010 2SS LS3 and 1978 STROKER 383 Join Date: Feb 2018
Location: Czech Republic
Posts: 1,586
|
Quote:
This would interest me myself. Every Camaro I meet here in Europe is different. The last case is the same as yours. The middle lights up only with the brake pedal. In order to comply with European legislation on orange turn signals, we had to rework and reconnect the all taillights. And make one backlight into a fog light.
__________________
My life is a constant struggle with Camaro.
K&N CAI, Stainless Power longtubes, high flow cats, modified Ragazzon High Performance axle back, Soler Performance ported throttle body, Soler Performance throttle controller, RAM clutch adjuster, modified LS7 clutch kit, Tick Performance billet bearing support, Tick Performance remote bleeder, separate clutch reservoir, BMR trailing arms, BMR toe rods, Pedders Suspension cradle bushing inserts, Control Arm Bushings, Strut tower brace, oil catch can, Hurst T-handle shifter, 20mm wheel spacers, DBA brakes, QTP Cutouts, Dynosteve tune. |
|
05-09-2021, 01:31 PM | #10 | |
Drives: 2012 Camaro 1LS Join Date: Apr 2021
Location: Jacksonville, FL
Posts: 31
|
Quote:
|
|
05-09-2021, 03:20 PM | #11 |
Drives: IOM 2013 2SS/RS, Greenie, 06 FXSTBi Join Date: Apr 2009
Location: Turd Town, WI
Posts: 1,583
|
Glad to hear it! Awesome. Good luck and enjoy your car!
|
05-09-2021, 06:21 PM | #12 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,297
|
Awesome brother, glad you got it fixed and it was a quick fix!! Enjoy that Camaro..
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
|
|
Thread Tools | |
|
|