09-09-2018, 10:59 PM | #1 |
Drives: 2017 SS 1LE Join Date: Jun 2017
Location: Woodstock, GA
Posts: 200
|
Windshield fog...vent cover
Has anyone made a vent cover or vent covers(one for drivers side one for passenger side)? If not I am think of making something that will clip to the vents to hold the vent cover in place to avoid windshield fog.
This is some serious bullshit.
__________________
17 SS 1LE.
|
09-10-2018, 01:02 AM | #2 |
Drives: 17 Camaro SS 1LE & 16 Sierra AT CC Join Date: Nov 2016
Location: Norman, OK
Posts: 2,424
|
I went to Lowe's and got some of the tall rubber baseboard molding, traced out a outline and cut a piece out. I keep it beside the console side of my drivers seat. When I have issues with outside condensation I throw it up on top of the vents.
__________________
2019 Corvette Z06 2LZ A8 - Halltech CAI, AWE non-catted X-pipe, Mamo V2 ported TB 592rwhp, bone stock 566rwhp
2017 Camaro SS 1LE - Procharger D1SC w/ Tial 2" BOV & Race intercooler / ARH full length catless headers / Alky meth injection system - 650rwhp on conservative tune SOLD |
09-13-2018, 01:06 PM | #3 |
Drives: Traded in 2016 BLUE VELVET 2LT RS Join Date: Aug 2016
Location: Woodstock GA
Posts: 262
|
I bought one of these and cut it to fit. Works pretty good.
https://smile.amazon.com/gp/product/...?ie=UTF8&psc=1 |
09-16-2018, 10:21 PM | #4 | |
Drives: 2017 2LT/RS & 2013 2LT/RS vert Join Date: May 2014
Location: Georgia
Posts: 383
|
Quote:
|
|
09-25-2018, 04:59 PM | #5 |
Drives: 2018 2SS vert, Hyper Blue Join Date: Jan 2017
Location: Tampa, Fl
Posts: 16
|
Mine started the fogging from day 1. I spoke to the selling dealers service manager. He told me there is a service bulletin out for it. Seems there is a small extra piece of gasket material on the blend door going to the windshield defrost vents that props it open a tiny bit. It’s a few other models as well. it’s a free repair. But... they will pull both the dashboard and the windshield out for the fix, which is to snip the extra piece off. At this point, I declined, don’t really want anyone pulling the glass or dash out cause it’ll never be the same. But in Florida, where it’s hot and very humid most of the year, I might have to. It certainly is annoying.
|
10-14-2018, 01:11 PM | #6 | |
Drives: 2018 Camaro SS 1LE Join Date: Oct 2018
Location: Treasure Coast, FL
Posts: 384
|
Quote:
My car has 300 miles on it and has been there everyday since i bought it last friday... |
|
10-15-2018, 08:24 AM | #7 | |
Drives: 17 Camaro SS 1LE & 16 Sierra AT CC Join Date: Nov 2016
Location: Norman, OK
Posts: 2,424
|
Quote:
They do no pull the dash on this repair, only the windshield and it still doesnt fix the issue. Several of people had it done, made no difference at all in the issue.
__________________
2019 Corvette Z06 2LZ A8 - Halltech CAI, AWE non-catted X-pipe, Mamo V2 ported TB 592rwhp, bone stock 566rwhp
2017 Camaro SS 1LE - Procharger D1SC w/ Tial 2" BOV & Race intercooler / ARH full length catless headers / Alky meth injection system - 650rwhp on conservative tune SOLD |
|
10-15-2018, 10:55 AM | #8 |
Ontario - 2SS Owner
Drives: Camaro 2SS Join Date: Aug 2018
Location: Canada
Posts: 51
|
Yeah can be annoying.
|
10-15-2018, 05:29 PM | #9 |
Drives: "Kara Zor-El" 2017 2SS HBM Join Date: Jul 2014
Location: Lower Hudson Valley
Posts: 2,036
|
There is another thread about this as well. I took the advice from that post and used baseboard molding and cut it to size and used it this summer. It worked very well, but at times the side vents caused the same issue on the door windows. I got some foam, cut it in little pieces and stuffed in the vents. I tried to make it as unnoticeable as possible and it works.
__________________
Lead me not into temptation. I already know the way.
Lana? Lana? LANA! LAAANAAAA!!!! What? Dangerzoooooone. |
|
|
Post Reply
|
|
|