05-01-2024, 07:37 PM | #1 |
Drives: LT1 Camaro Join Date: Nov 2020
Location: VA
Posts: 22
|
pray ported lt1 intake manifold (95 MM TB) and pray ported 87MM TB
I know I might be leaving a couple of HP on that table but any issue using a 87MM ported TB with a ported LT1 manifold that was ported for a 95MM TB? I already have the ported 87 and trying to be as cost effective as possible.
|
05-02-2024, 07:59 AM | #2 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,953
|
Not enough to lose sleep over.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
05-02-2024, 08:20 AM | #3 |
Drives: 23 2SS 1LE Join Date: Feb 2019
Location: GA
Posts: 606
|
Agreed. Unless you are chasing dyno numbers or lap times, it won't really matter. Although a ported 87 can be more expensive, you may be able to sell it for a LT5 95mm.
__________________
Instagram: RideWithDanger
Current Mods: Rotofab, Ported LT2 intake, LT5 TB, Kooks Headers, AWE Touring Catback Radiant Red 23' 2SS 1LE 1100: 11/14/22 | BUILT: 3/16/23 2000: 2/17/23 | 4200: 5/8/23 3000: 2/27/23 | 5000/6000: 5/15/23 |
|
|
Post Reply
|
|
|