[FactoryMatt]

Originally Posted by GunMetalGrey

I guess the lack of responses just shows that nobody who is serious about the track was using mag ride anyways... ?

very nice. can you share spring rates and any setup notes w/ clickers or dynographs they provided? do they run helper or tender springs? do they run 2.5" ID springs? is the valving linear or digressive? how much droop is preserved? (i.e. are the dampers/stroke long enough?)

[GunMetalGrey]

Originally Posted by FactoryMatt

very nice. can you share spring rates and any setup notes w/ clickers or dynographs they provided? do they run helper or tender springs? do they run 2.5" ID springs? is the valving linear or digressive? how much droop is preserved? (i.e. are the dampers/stroke long enough?)

All I can say is I went with the GTS (middle) spring rate but with a helper spring in the rear which makes it kinda progressive rate...

The settings I ended up with after one adjustment and track session were...

Front
Compression set to max 14 out of 14 and rebound set to 12 out of 18

Rear
Compression set to 10 out of 14 and rebound set to 12 out of 18