Homepage Garage Wiki Register Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Technical Camaro Topics > Dragstrip and Launching Discussion


AWE Tuning


Post Reply
 
Thread Tools
Old 03-24-2024, 05:54 PM   #1
JSH


 
JSH's Avatar
 
Drives: '20 ZLE
Join Date: Jun 2020
Location: Mile High
Posts: 3,551
How much gas in the ZL1 tank?

How much gas do you want in the tank at the starting line? 2-3 gal.?
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650.
100+ octanes, no eth, no meth, no N2O.
2/23 - 1031/1004 wheel.
4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes).
2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next.
JSH is offline   Reply With Quote
Old 03-24-2024, 09:38 PM   #2
ZL1Atlanta
 
ZL1Atlanta's Avatar
 
Drives: 2017 Chevrolet Camaro ZL1
Join Date: Jul 2018
Location: Canton, GA
Posts: 405
I have the Fore system so we always run it at least 3/4 tank so it doesn’t cavitate, but with the stock pump I would run it at 1/4 tank to save weight.
__________________
2017 ZL1 - PB 8.05 @ 172 MPH @ 3730 lbs @ 70 DA (work in progress)

Built by Vengeance Racing, tuned by Elite Tuned
ZL1Atlanta is offline   Reply With Quote
Old 03-25-2024, 07:57 PM   #3
Badmojo
aka BeastZL1
 
Badmojo's Avatar
 
Drives: 2019 Camaro ZL1 1LE, 2004 Cobra
Join Date: Dec 2017
Location: NC
Posts: 1,103
I would recommend no less than 1/4 a tank, which is 4.75 gallons. I've had fuel starvation issues on the road course (lateral G) with less.
__________________
2019 Camaro ZL1 1LE
Racing for ALS Youtube Link
Badmojo is offline   Reply With Quote
Old 03-28-2024, 08:42 PM   #4
JSH


 
JSH's Avatar
 
Drives: '20 ZLE
Join Date: Jun 2020
Location: Mile High
Posts: 3,551
There's no need to create a new thread for this question:

I use 1st gear delete, so in the water box, can I start the tires spinning in 2nd and quicklyshift to 3rd w/o endangering clutches? Using MT ET Street R 325/15
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650.
100+ octanes, no eth, no meth, no N2O.
2/23 - 1031/1004 wheel.
4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes).
2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next.
JSH is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:47 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.