05-19-2010, 10:40 AM | #1 |
Account Suspended
Drives: 2010 Nickey Chicago Camaro Join Date: Jun 2009
Location: New Lenox
Posts: 63
|
Edelbrock E- Force Super Charger Install On 2010 Camaro
Edelbrock E- Force Super Charger
Install 2010 Camaro & Dyno Route 66 Motorsports is proud to announce that it is one of the very first to install the E-Force Super Charger on a 2010 Camaro automatic. What we found here at Route 66 Motorsports is that there is no cutting or modifying needed to install the complete system under the stock hood. If at any time we find it necessary to return the car to stock, the system can be removed and all the stock parts can be reinstalled. Edelbrock’s instruction folder was very informative with color photos and step by step instructions. The whole install process was very simplistic due to its well thought out design and engineering. As we write this the 2010 Camaro is being strapped down to the dyno. Tune in for dyno results and video. Click Here For More Pictures
You can also go to our web site at www.rt66motorsports.com to see step by step pictures of the install. |
05-19-2010, 11:47 AM | #2 |
Drives: 2010 2SS IOM L99 Join Date: Jan 2010
Location: LOUISVILLE,KY..
Posts: 7,545
|
very nice.
|
05-19-2010, 12:26 PM | #3 |
SoCal C5 Family Member
|
Can't wait to see what the E-Force do on a automatic.
__________________
|
05-19-2010, 06:05 PM | #4 |
Drives: C63 P31 Join Date: Feb 2010
Location: West Coast
Posts: 767
|
Looks like a great kit. I bet it will make really good numbers. I am curious to learn how much boost this kit makes with the base pulley.
Also, just my opinion, but the E-force looks so much better without those side plastic pieces. I'm staying tuned. |
05-19-2010, 06:12 PM | #5 |
|
I think this looks awesome. Please post numbers
|
05-19-2010, 10:29 PM | #6 |
Drives: 2010 Camaro SS Join Date: May 2010
Location: Phila,Pa.
Posts: 557
|
I thought so too but after looking at this pic I kinda like the side peices
I think they are cast though and not plastic?
__________________
SOLD
2010 Camaro 1SS/A6 12.59@111.31 Magnaflow Magnapack Axleback & Resonated X-Pipe/OBX LT Headers/Airaid Cold Air Kit/Injection Connection Tuned |
05-19-2010, 10:31 PM | #7 |
Drives: 2SS Join Date: May 2009
Location: Fort Collins
Posts: 611
|
Cast..........
__________________
2SS/RS CGM/BLK GFX MN6418 Stroker.785rwhp/885lbtq.50 SHOT NO2..Pfadt arms,toe links,coilovers,swaybars,end links,engine mounts,dif/sub bushings.MGWshifter.Tick LVL 3.ARH1 7/8 LT's/ARH exhaust.ADM gauges/race CAI.E-FORCE SC.8 rib IW 10%OD.LPE dual pump/module.85lb inj,custom valve covers.RMCR tune.TOOLEY RACING CAM.JRE posi kit.JRE fuel upgrade.RX MONSTER CatchCan.DSS axels/DS.Hammerhead rear, 3:73's. WYOSPEED builthttp://www.camaro5.com/forums/showthread.php?t=115687
|
05-19-2010, 10:50 PM | #8 |
Drives: 2010 Camaro SS Join Date: May 2010
Location: Phila,Pa.
Posts: 557
|
I thought so, thanks for clearing that up...
__________________
SOLD
2010 Camaro 1SS/A6 12.59@111.31 Magnaflow Magnapack Axleback & Resonated X-Pipe/OBX LT Headers/Airaid Cold Air Kit/Injection Connection Tuned |
05-20-2010, 02:04 AM | #9 |
|
If i could get one with custome writing instead of teh 'supercharged' or without it.. it would be perfect!
|
05-20-2010, 03:40 AM | #10 |
Drives: C63 P31 Join Date: Feb 2010
Location: West Coast
Posts: 767
|
|
05-20-2010, 08:39 AM | #11 |
Drives: 11 2SS/RS E-Force Supercharged Join Date: Apr 2010
Location: Charlotte
Posts: 814
|
I think the side pieces are what makes it look like a very clean install. It hides the coils and wires. Would be pretty easy to custom paint them as well.
__________________
|
05-21-2010, 09:20 AM | #12 |
SoCal C5 Family Member
|
No numbers yet still waiting to see numbers for the automatic.
__________________
|
05-21-2010, 10:01 AM | #13 |
Account Suspended
Drives: 2010 Nickey Chicago Camaro Join Date: Jun 2009
Location: New Lenox
Posts: 63
|
We are working on putting together the video from the dyno and it should be up on Monday!! Sorry to keep you waiting!!
|
05-27-2010, 01:58 PM | #14 |
Account Suspended
Drives: 2010 Nickey Chicago Camaro Join Date: Jun 2009
Location: New Lenox
Posts: 63
|
Having some techincal errors with the video but it should be up next week along with the numbers - sorry to keep you all waiting
|
|
|
Tags |
2010 camaro, e-force, edelbrock, route 66 motorsports, super charger |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CAMARO WIKI | Tran | Wiki | 66 | 04-22-2024 11:41 AM |
DIY : Install Performance Swaybars in 2010 Camaro | Nine Ball | Camaro DIY & HOW-TO instructions & discussions | 17 | 09-14-2015 12:36 AM |
Does the v6 have enough power? | cstproductions | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 305 | 08-29-2012 09:27 PM |
Answeres to questions I have stumbled on | dieseldave24v | 5th Gen Camaro SS LS LT General Discussions | 13 | 02-23-2009 06:56 PM |