STAINLESS WORKS +NO WEEDS - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BIG NASST · 02-25-2018, 01:14 AM

Iwent to order no weeds and was told they weren't sure if it would match up with stainless works. They said stock or american racing is what their set up for.Im sure someone could fabricate something ,but i want to do this myself.Does anyone have this setup?Pictures if you have them.Was it something you did yourself? I have sw headers no cats xpipe retrocatback

Gunmetal Speedster · 02-25-2018, 02:28 AM

Easiest way to find out would be find the diameter of the pipe the Noweeds are replacing and the diameter of the Noweeds themselves and see if they match haha.

pyroguy · 02-25-2018, 08:46 AM

Stainless works headers should bolt up provided you order the correct outlet pipe for your cats/off road pipe. The question comes in with what do you have behind the cats? Doing some research on NoWeeds myself, it appears as though they have 2.5” piping and 2.75” piping for ZL1 cars. Their ARH kit is a shorter amount of piping to accommodate the different connection configuration that ARH’s system offers, but isn’t any different on pipe diameter. I hope this helps and good luck getting some nice diverters!

BIG NASST · 02-25-2018, 08:58 AM

i didnt think he meant diameter wise, ithought he meant. routing or path wise.The videos ive seen have the divereters in the same area. Ijust assumed he meant the spacing between was now wider or narrower were i need to get them to the same area .like the path ofamerican racing is different. off the header

BIG NASST · 02-25-2018, 09:01 AM

sorry i was asking my question. and you were already giving my answer pyroguy thanks

BIG NASST · 02-25-2018, 09:08 AM

ill do the research i assumed. i was 3inches all the way from headers back

02-25-2018, 01:14 AM	#1
BIG NASST Drives: 2013 2ss hotwheels Join Date: Aug 2014 Location: iowa Posts: 270	STAINLESS WORKS +NO WEEDS Iwent to order no weeds and was told they weren't sure if it would match up with stainless works. They said stock or american racing is what their set up for.Im sure someone could fabricate something ,but i want to do this myself.Does anyone have this setup?Pictures if you have them.Was it something you did yourself? I have sw headers no cats xpipe retrocatback

02-25-2018, 02:28 AM	#2
Gunmetal Speedster Drives: Savitar; The 500rwhp N/A Monster! Join Date: Aug 2016 Location: Middletown, Ohio Posts: 2,914 View My Garage	Easiest way to find out would be find the diameter of the pipe the Noweeds are replacing and the diameter of the Noweeds themselves and see if they match haha. __________________ **SOLD504HP/433**TQ \| Night Fury cammed • Cold Air Inductions intake • Bo White ported TB • Speed Engineering 1 7/8 longtubes • NPP catback • QTP low profile cutouts • Powerbond 25% UDP • 3.73 gears • JRE scoop • ZL1 grille • R1 Concepts drilled/slotted rotors • built/tuned by Weapon X Motorsports Instagram \| YouTube \| Build Thread

02-25-2018, 08:46 AM	#3
pyroguy Started#gottalovethatblue Drives: ABM #831 Join Date: Apr 2013 Location: TN Posts: 6,919 View My Garage	Stainless works headers should bolt up provided you order the correct outlet pipe for your cats/off road pipe. The question comes in with what do you have behind the cats? Doing some research on NoWeeds myself, it appears as though they have 2.5” piping and 2.75” piping for ZL1 cars. Their ARH kit is a shorter amount of piping to accommodate the different connection configuration that ARH’s system offers, but isn’t any different on pipe diameter. I hope this helps and good luck getting some nice diverters! __________________ '10 Camaro 2SS/RS \| Aqua Blue #831 of 3,903 \| Silver Stripes Check out my build thread Last edited by pyroguy; 02-25-2018 at 12:36 PM.

02-25-2018, 08:58 AM	#4
BIG NASST Drives: 2013 2ss hotwheels Join Date: Aug 2014 Location: iowa Posts: 270	i didnt think he meant diameter wise, ithought he meant. routing or path wise.The videos ive seen have the divereters in the same area. Ijust assumed he meant the spacing between was now wider or narrower were i need to get them to the same area .like the path ofamerican racing is different. off the header

02-25-2018, 09:01 AM	#5
BIG NASST Drives: 2013 2ss hotwheels Join Date: Aug 2014 Location: iowa Posts: 270	sorry i was asking my question. and you were already giving my answer pyroguy thanks

02-25-2018, 09:08 AM	#6
BIG NASST Drives: 2013 2ss hotwheels Join Date: Aug 2014 Location: iowa Posts: 270	ill do the research i assumed. i was 3inches all the way from headers back