Just 3.91 comment - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

rich2342 · 04-30-2018, 08:21 PM

22813040 - CAMARO 1LE 3.91 GEAR KIT.

Found this on pace.com?

Is this all that is needed on a 2010 ss?

krisprz2010camaross · 05-01-2018, 02:44 PM

Quote:

Originally Posted by rich2342

22813040 - CAMARO 1LE 3.91 GEAR KIT.

Found this on pace.com?

Is this all that is needed on a 2010 ss?

If it’s all this stuff shown in the picture then yes. You just have to get it installed and get the car recalibrated for the gears or the speedometer will be off.

rich2342 · 05-01-2018, 07:37 PM

I called one dealer who won't install nor warranty it.

I don't think a second one will calibrate it. I also can't provide my own parts.

LCPLPunk · 05-01-2018, 07:51 PM

Plenty of non-dealers will install and you can bring your own parts..

As far as the specific part question, I've been told you should also have a spare Race and some other part I can't remember.

Kylejames83 · 05-01-2018, 08:51 PM

I based my decision off this post and bought used 3.91 and now I can't sell my old one. Lol. Should have just got the 3.73's new. Hopefully someone will eventually.

rich2342 · 05-02-2018, 11:38 AM

It would be nice to have the gm 2 years part warranty. Of course another shop can do it, but no warranty.

I was planning doing the ZL1 shifter and 3.91's.

What is actually needed? Is it just the ring and pinion?

I have seen different packages offered.

LCPLPunk · 05-02-2018, 04:16 PM

Just have the shop warranty their work, I've heard very few, if any complaints about the parts themselves.

*The_Blur* · 05-02-2018, 07:17 PM

I asked dynosteve to do my install when I was passing through, and RDP Motorsport did a great job on my install. I think any competent shop can do this work if they have attention to detail and do the work the right way. Depending on your mileage, it may also be a good opportunity to do some inspection work under the car. How much corrosion is down there? What color is the differential fluid? Is your poorly designed tunnel brace rubbing your performance exhaust? Any time you can get under the car is a good time to take a look at the material condition of your car.

Ashen 6.2 · 05-02-2018, 08:36 PM

Quote:

Originally Posted by Kylejames83

I based my decision off this post and bought used 3.91 and now I can't sell my old one. Lol. Should have just got the 3.73's new. Hopefully someone will eventually.

Might try posting it for sale on the g8 forum.

Kylejames83 · 05-03-2018, 06:21 PM

Appreciate the advice ashen, I went to the site and you have to have 40 post before you can sell on their site.

Ashen 6.2 · 05-03-2018, 07:28 PM

Quote:

Originally Posted by Kylejames83

Appreciate the advice ashen, I went to the site and you have to have 40 post before you can sell on their site.

Oh wow. I didn’t realize that. Sorry for the wild goose chase.

05-01-2018, 07:51 PM	#18
LCPLPunk USA-1 Drives: 2010 Camaro SS L99 Join Date: Jul 2016 Location: Near DC Posts: 1,893 View My Garage	Plenty of non-dealers will install and you can bring your own parts.. As far as the specific part question, I've been told you should also have a spare Race and some other part I can't remember. __________________ "A Camaro in the garage is safe, but that's not what Camaros are built for..." R2C CAI / Apex Scoop / VMAX Ported TB / Speed Engineering LTHs / X-pipe / GPI port/rod-mod intake manifold / Circle D 3200 278mm Converter / 3.91 gears / DynoSteve tuned / 1LE Shocks/Struts/Toe Links / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket, Steering rack bushing / B&M Tranny Cooler / RX Catch Can / Jannetty Tranny Dipstick / 2012+ Heater Hose / 2013+ Rearview Mirror / Fuel rail flip / Drake shifter / Oil Cooler Delete

05-02-2018, 04:16 PM	#21
LCPLPunk USA-1 Drives: 2010 Camaro SS L99 Join Date: Jul 2016 Location: Near DC Posts: 1,893 View My Garage	Just have the shop warranty their work, I've heard very few, if any complaints about the parts themselves. __________________ "A Camaro in the garage is safe, but that's not what Camaros are built for..." R2C CAI / Apex Scoop / VMAX Ported TB / Speed Engineering LTHs / X-pipe / GPI port/rod-mod intake manifold / Circle D 3200 278mm Converter / 3.91 gears / DynoSteve tuned / 1LE Shocks/Struts/Toe Links / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket, Steering rack bushing / B&M Tranny Cooler / RX Catch Can / Jannetty Tranny Dipstick / 2012+ Heater Hose / 2013+ Rearview Mirror / Fuel rail flip / Drake shifter / Oil Cooler Delete

05-02-2018, 07:17 PM	#22
The_Blur Moderator Drives: 2018 Harley-Davidson Street Bob Join Date: Nov 2007 Location: San Diego Posts: 14,769	I asked dynosteve to do my install when I was passing through, and RDP Motorsport did a great job on my install. I think any competent shop can do this work if they have attention to detail and do the work the right way. Depending on your mileage, it may also be a good opportunity to do some inspection work under the car. How much corrosion is down there? What color is the differential fluid? Is your poorly designed tunnel brace rubbing your performance exhaust? Any time you can get under the car is a good time to take a look at the material condition of your car. __________________ RDP Motorsport//GEN5DIY//Cultrag Performance//JPSS//Rodgets Chevrolet// Operation Demon//Buy at Invoice//RACECARWEAR RESPECT ALL CARS. LOVE YOUR OWN. warn 145:159 ban

04-30-2018, 08:21 PM	#15
rich2342 Drives: 2010 CGM Camaro SS Join Date: Dec 2016 Location: MA Posts: 515	22813040 - CAMARO 1LE 3.91 GEAR KIT. Found this on pace.com? Is this all that is needed on a 2010 ss?

05-01-2018, 07:37 PM	#17
rich2342 Drives: 2010 CGM Camaro SS Join Date: Dec 2016 Location: MA Posts: 515	I called one dealer who won't install nor warranty it. I don't think a second one will calibrate it. I also can't provide my own parts.

05-01-2018, 08:51 PM	#19
Kylejames83 Drives: 2011 camaro 2SS Join Date: Apr 2017 Location: Wichita kansas Posts: 134	I based my decision off this post and bought used 3.91 and now I can't sell my old one. Lol. Should have just got the 3.73's new. Hopefully someone will eventually.

05-02-2018, 11:38 AM	#20
rich2342 Drives: 2010 CGM Camaro SS Join Date: Dec 2016 Location: MA Posts: 515	It would be nice to have the gm 2 years part warranty. Of course another shop can do it, but no warranty. I was planning doing the ZL1 shifter and 3.91's. What is actually needed? Is it just the ring and pinion? I have seen different packages offered.

05-03-2018, 06:21 PM	#24
Kylejames83 Drives: 2011 camaro 2SS Join Date: Apr 2017 Location: Wichita kansas Posts: 134	Appreciate the advice ashen, I went to the site and you have to have 40 post before you can sell on their site.