03-26-2020, 06:12 PM | #1 |
Drives: 2019 Camaro zl1 Join Date: Jul 2019
Location: Detroit
Posts: 54
|
Toyo R888R question
Do you guys recommend I go with the 305 35s 20
Or 315 30 20? This is for a 2019 Zl1 10 speed |
03-26-2020, 06:42 PM | #2 |
Drives: 2019 ZL-1, Shadow Gray, Sold Join Date: Jan 2019
Location: Fredericksburg, VA
Posts: 1,390
|
I think you are going to have a potential rub issue with the 35s on the inside of the fender. Others on the forum have installed the 315/30s without any issue.
|
03-26-2020, 06:57 PM | #3 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,600
|
305/35/20 is one full inch taller, I seriously doubt it will fit without massive mods. I'm running 315/30/20 R888R's in the rear and it's already a very close call even after relocating the main body harness on the driver side.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
03-26-2020, 10:54 PM | #4 |
Drives: 2018 Camaro ZL1 Join Date: Aug 2019
Location: MA
Posts: 9
|
I am thinking about replace my stock rears with the same exact r888r's. Do you like them? and where did you relocate the wire harness too? Is it a difficult change?
|
03-26-2020, 11:13 PM | #5 | |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,600
|
Quote:
Here's a thread about the harness relocation, not a difficult change at all: https://www.camaro6.com/forums/showthread.php?t=485975. Also, LethalCamaro has a youtube video up that shows the process in detail.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
03-26-2020, 11:19 PM | #6 | |
Drives: 2018 Camaro ZL1 Join Date: Aug 2019
Location: MA
Posts: 9
|
Quote:
|
|
03-27-2020, 04:04 AM | #7 |
Drives: 2017 ZL1 A10 Join Date: Aug 2009
Location: Dubai
Posts: 1,250
|
I had these on my Z , 315 30 20 & the grip was great but it was so noisy for daily driving.
Ahmad
__________________
2017 ZL1 A10 SW (SOLD)
Whipple 2.9 with 3.2 Pulley, Weapon-X Stage 3 Cam, FIICHILLER ,LG Motorsports LT, Borla S type, ROTFAB Big Gulp, Big 3 Reservoir Glassskinz rear window valance . 2012 ZL1 A6 (SOLD) Forged 376 CI, LSA HeartBeat, Mast Medium Bore Heads & JDP ZLR Cam, ARH LT , MagnaFlow Resonated X + Borla Atak Catback, ADM 102mm Snout, CAI, NW102MM TB, ID850, Fore Triple Fuel Pump, MSD Wire's, Moroso CC. Alky Control, FIICHILLER. |
03-29-2020, 09:52 AM | #8 |
Drives: Corvette C7 Camaro Zl1 Join Date: Sep 2019
Location: PR
Posts: 5
|
I switch from r888r 315 30 20 to m/t 305 35 20. Both fit perfect.
The toyos are the better of the two on handling. On drag both the same 11.2 at 128. The car is an oem car. On a modify car the m/t would be better. |
03-30-2020, 06:15 AM | #9 |
AXLERODZL1
Drives: 2019 Riverside blue ZL1 Camaro Join Date: Dec 2018
Location: Carrollton, VA
Posts: 205
|
I put 305/35r20 nitto 555r's on my 19.
Hooks pretty good without the r888r noise.
__________________
'19 ZL1 A10 Riverside Blue PDR/Nav/Sunroof
Kong ported blower/snout Roto-Fab Big gulp 103 TB Lingenfelter Lower Pulley(9.17) 1 7/8 ARH headers and Exhaust Meth injection(single nozzle) 733whp/788tq |
03-31-2020, 05:51 PM | #10 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
R888Rs in 325/30/20 with 20x11.5” BC forged wheels and custom off set. No rubbing. Hooks great for roll racing and pretty much the best street tire/dry traction around. The noise doesn’t bother me one bit.
|
03-31-2020, 08:04 PM | #11 |
Drives: Fast Join Date: Mar 2015
Location: Michigan
Posts: 3,696
|
|
03-31-2020, 08:19 PM | #12 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
.
|
03-31-2020, 08:20 PM | #13 |
Drives: Fast Join Date: Mar 2015
Location: Michigan
Posts: 3,696
|
Yep I was right, very nice! I like that look a lot.
|
03-31-2020, 08:26 PM | #14 |
Drives: 2019 Camaro zl1 Join Date: Jul 2019
Location: Detroit
Posts: 54
|
|
|
|
Post Reply
|
|
|