06-13-2019, 08:40 PM | #1 |
Hillbilly Highness
Drives: 2001 S10, 2022 LT1 Vert Join Date: Jul 2018
Location: GA, USA
Posts: 72
|
Uneven top
Quick question,
When I stand behind my car and look forward towards the front, I can see that the rubber gasket that the top sits on hangs out a little more on the driver's side. There is about 1/4" on the drivers side that is visible and only about 1/8" on the passenger side. There is an even amount across the back and the top must be aligned because the top goes up and down and the windows go up easily with the top down. It looks to be 100% aligned across the front as well. This one is a 2019 with only about 500-600 miles. I don't recall this on my 2017 vert, but I am old and could be mistaken. I only noticed this while detailing, so it isn't that obvious. Is this normal or something I should have looked at?! Thanks all, Ox45 |
06-13-2019, 08:43 PM | #2 |
Drives: 2017 HBM 2LT RS Convertible V6 A8 Join Date: Jan 2018
Location: NJ
Posts: 654
|
A picture would help
|
06-13-2019, 08:51 PM | #3 |
Hillbilly Highness
Drives: 2001 S10, 2022 LT1 Vert Join Date: Jul 2018
Location: GA, USA
Posts: 72
|
|
06-13-2019, 08:52 PM | #4 |
Hillbilly Highness
Drives: 2001 S10, 2022 LT1 Vert Join Date: Jul 2018
Location: GA, USA
Posts: 72
|
Top is passenger and bottom is the driver side. Both pics taken from the side behind the rear window.
|
|
|
Post Reply
|
|
|