You are browsing camaro6 
06-21-2018, 08:48 PM
|
#1 |
 
Drives: 2017 SS Join Date: Sep 2011
Location: Oklahoma
Posts: 417
|
Aeroforce vent gauge holder
For the guys who have the Aeroforce defroster vent gauge mount, have you had problems with fitment?
The mount will not stay on the vent hole. See picture below.  Sent from my iPhone using Tapatalk
__________________
2017 SW SS
 |
|
|
|
07-05-2018, 06:08 PM
|
#2 |
|
Drives: 2018 Camaro ZL1 Join Date: Feb 2018
Location: FW TX
Posts: 384
|
I had the exact same problem. I ended up putting a drop of glue and it's held fine since.
|
|
|
|
|
07-05-2018, 07:37 PM
|
#3 |
   
Drives: 2018 ZL1 Join Date: Oct 2011
Location: Huntingtown, MD
Posts: 1,138
|
Looks like you dpush it down all the way. Mine actually snapped down into place and fits perfect.
__________________
2018 ZL1…Many mods to come
|
|
|
|
|
07-05-2018, 08:18 PM
|
#4 | |
|
Drives: 2017 SS Join Date: Sep 2011
Location: Oklahoma
Posts: 417
|
Aeroforce vent gauge holder
Quote:
Push it down it pops back up, just like that. Sent from my iPhone using Tapatalk
__________________
2017 SW SS
|
|
|
|
|
|
07-06-2018, 03:21 PM
|
#5 |
 
Drives: 2016 M6 Hyper Blue 2SS Join Date: May 2016
Location: Texas
Posts: 221
|
Mine did that and I pushed down good and it stayed. You drilled the hole through the ac duct there right? If not then I doubt it will sit in there.
__________________
16 2SS M6 // Kooks 1- 7/8 w/Off Road Pipes // RotoFab w/Oiled filter // Custom Axle Back Exhaust // E-85 Sensor // Tuned SOLD!!
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
