Homepage Garage Wiki Register Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction Discussions


AWE Tuning


Post Reply
 
Thread Tools
Old 12-04-2019, 06:38 AM   #1
tlk-1997
 
tlk-1997's Avatar
 
Drives: 1997 Camaro SS LT4
Join Date: Jan 2019
Location: Deltona, FL
Posts: 47
Hot Wheels with Edelbrock 2650

I pulled the trigger for the Edelbrock 2650 item 15595 for the Hot Wheels. I took advantage of the cyber Monday 15% off and free shipping. It was a long process of deciding between the Magnuson and Edelbrock.
__________________
2018 Camaro 2SS M6 Hot Wheels,Edelbrock 2650, Hurst Short Throw Shifter. Production Number 90
1997 Camaro SS M6 LT4 tribute
tlk-1997 is offline   Reply With Quote
Old 12-04-2019, 06:51 AM   #2
laynlo15
 
laynlo15's Avatar
 
Drives: 2022 Lt1 A10
Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
Wish you could have went with Magnuson but congrats on your purchase as that's a good percentage off.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
laynlo15 is offline   Reply With Quote
Old 12-04-2019, 07:15 AM   #3
Zack46


 
Zack46's Avatar
 
Drives: 2018 2SS Camaro Hot Wheels Edition
Join Date: Sep 2015
Location: Cleveland, Ohio
Posts: 2,814
Congrats and welcome to the hot wheels club!
__________________
Zack46

2018 Camaro 2SS Orange Crush Hot Wheels Limited Edition
Power Sunroof, 8 Speed Auto/Remote Start, NPP Exhaust
Production Sequence Number 98
NEOCC Camaro Club Member

Former Ride: 2016 Camaro 2LT RS V6 Hyper Blue Metallic
Zack46 is offline   Reply With Quote
Old 12-04-2019, 09:02 PM   #4
gotswap
 
gotswap's Avatar
 
Drives: 2019 ZL1 Crush
Join Date: Jan 2019
Location: Colorado Springs
Posts: 564
You are going to love it!!!
__________________
2019 Crush A10
E-Force 2650
670WHP 615WTQ

All besides the 2650 is bone stock down to the air filter.
gotswap is offline   Reply With Quote
Old 12-04-2019, 09:38 PM   #5
laynlo15
 
laynlo15's Avatar
 
Drives: 2022 Lt1 A10
Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
The 2650s are pretty stellar.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
laynlo15 is offline   Reply With Quote
Old 12-06-2019, 07:49 PM   #6
tlk-1997
 
tlk-1997's Avatar
 
Drives: 1997 Camaro SS LT4
Join Date: Jan 2019
Location: Deltona, FL
Posts: 47
Look what showed up today. This was a fast shipment from California to Florida. Shipped on Monday.
Attached Images
  
__________________
2018 Camaro 2SS M6 Hot Wheels,Edelbrock 2650, Hurst Short Throw Shifter. Production Number 90
1997 Camaro SS M6 LT4 tribute
tlk-1997 is offline   Reply With Quote
Old 12-07-2019, 08:10 AM   #7
Dysan911

 
Dysan911's Avatar
 
Drives: 2017 50th Anniversary 2SS
Join Date: Sep 2016
Location: Jacksonville, FL
Posts: 930
Good lord that's a huge box they ship that in!.
Dysan911 is offline   Reply With Quote
Old 12-07-2019, 08:32 AM   #8
tlk-1997
 
tlk-1997's Avatar
 
Drives: 1997 Camaro SS LT4
Join Date: Jan 2019
Location: Deltona, FL
Posts: 47
Quote:
Originally Posted by Dysan911 View Post
Good lord that's a huge box they ship that in!.
It's the full kit.
Attached Images
 
__________________
2018 Camaro 2SS M6 Hot Wheels,Edelbrock 2650, Hurst Short Throw Shifter. Production Number 90
1997 Camaro SS M6 LT4 tribute
tlk-1997 is offline   Reply With Quote
Old 12-07-2019, 07:17 PM   #9
tlk-1997
 
tlk-1997's Avatar
 
Drives: 1997 Camaro SS LT4
Join Date: Jan 2019
Location: Deltona, FL
Posts: 47
I made great progress today. I got the disassembly compete and I am ready to start the assembly process. I heated the crank bolt and used my air impact and it came right out. I replaced the LT1 crank seal with a LS3. Thanks for the heads up EDFHOBBIES! The only concern I have is that the LT1 crank Seal seems it is install backwards. The flat side of the seal was facing inwards. I installed the LS3 seal flat side facing outwards. Hope this is correct. I see why the LT1 seal fails with higher boost. It super thin.
Attached Images
         
__________________
2018 Camaro 2SS M6 Hot Wheels,Edelbrock 2650, Hurst Short Throw Shifter. Production Number 90
1997 Camaro SS M6 LT4 tribute
tlk-1997 is offline   Reply With Quote
Old 12-08-2019, 07:37 AM   #10
laynlo15
 
laynlo15's Avatar
 
Drives: 2022 Lt1 A10
Join Date: Nov 2015
Location: clark, mo
Posts: 8,857
These seal should have been installed at the factory. The LT1 seal as you can see if very flimsy. I pushed mine out last year and Ls3 is the fix. Just do it.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
laynlo15 is offline   Reply With Quote
Old 12-08-2019, 09:59 AM   #11
KingLT1


 
KingLT1's Avatar
 
Drives: 2016 1SS NFG A8
Join Date: Aug 2017
Location: 46804
Posts: 6,764
Choice choice replacing the seal. I would also advise installing a Metco valve cover breather that has the one way disk so it only vents to atmosphere under boost.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP
Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP
Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA
KingLT1 is offline   Reply With Quote
Old 12-08-2019, 08:36 PM   #12
tlk-1997
 
tlk-1997's Avatar
 
Drives: 1997 Camaro SS LT4
Join Date: Jan 2019
Location: Deltona, FL
Posts: 47
Day two.....Got the pulleys, belts and supercharger installed. I plan on using the GM CAI. Its a close fit with the supercharger belt drive but I think it will be OK. The instruction that came with the kit and the online one have some missing or misleading steps. The map sensor and brake booster hose is misleading. I hope to have everything done by next Sunday providing I get the tune from Edelbrock. I plan on running their tune for a few months.
Attached Images
  
__________________
2018 Camaro 2SS M6 Hot Wheels,Edelbrock 2650, Hurst Short Throw Shifter. Production Number 90
1997 Camaro SS M6 LT4 tribute
tlk-1997 is offline   Reply With Quote
Old 12-08-2019, 09:14 PM   #13
Joshinator99


 
Joshinator99's Avatar
 
Drives: 2017 Camaro 2SS A8
Join Date: Aug 2018
Location: Petersham MA
Posts: 4,701
Nice work! Looking good.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
Joshinator99 is offline   Reply With Quote
Old 12-09-2019, 05:36 AM   #14
wnta1ss

 
Drives: 2017 Camaro 1SS
Join Date: Aug 2016
Location: NH
Posts: 1,692
Quote:
Originally Posted by tlk-1997 View Post
I plan on using the GM CAI. Its a close fit with the supercharger belt drive but I think it will be OK. The instruction that came with the kit and the online one have some missing or misleading steps. The map sensor and brake booster hose is misleading. I hope to have everything done by next Sunday providing I get the tune from Edelbrock. I plan on running their tune for a few months.
Suggest checking with Edelbrock on what parts their tune was made with. The GM CAI needs an adjustment to the MAF calibration, so if they used a stock airbox when they developed their tune, it won't match your setup.
wnta1ss is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:47 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.