supercharging a 2016 SS LT1 - Page 3

gippy87 · 08-25-2016, 06:56 PM

Quote:

Originally Posted by Mighunter

When are u leaving?

tomorrow night

Mighunter · 08-26-2016, 11:54 AM

Quote:

Originally Posted by gippy87

tomorrow night

Good luck bro, be safe!!!

Marine Corps · 08-27-2016, 03:52 AM

What about the ProCharger P1. It gives you about 160 additional HP and 7psi of boost. Can get a 3 year warranty for an additional $49. The price is also lower at about $5,700 plus installation.

wnta1ss · 08-27-2016, 06:31 AM

Quote:

Originally Posted by Atomic Ed

Actually, my Edelbrock is making 560 hp and 540 tq. with no other add-ons.

With all due respect, keep in mind that dynos vary. For example, I've seen anywhere from 365 to 431 listed as the stock hp of a Gen 6 SS. What really matters is the gain you get on the same dyno, stock vs mod. Personally I think the Edelbrock and Magnuson use the same Eaton blower as their basis, so they probably produce fairly similar hp with the same pulley. If anything, the Magnuson may have a slightly better intercooler setup.

Marine Corps · 08-28-2016, 11:19 AM

What about the Procharger P1 at 7psi?

JoeAyalaM · 08-28-2016, 08:41 PM

Different animal, PDS and Centris don't work the same way.

Go P1for drag, PD for DD, but you could really do either for anything, it depends on your liking of how they drive.

ender2664 · 08-30-2016, 10:02 AM

Link and or cost of an LT4 blower?

baf2000 · 08-30-2016, 04:34 PM

http://www.gmpartsdirect.com/auto-pa...omponents-scat

ender2664 · 08-30-2016, 04:42 PM

Without the core the price is 4,341 for just the supercharger:(

jessrayo · 08-30-2016, 06:15 PM

Quote:

Originally Posted by ender2664

Link and or cost of an LT4 blower?

Quote:

Originally Posted by ender2664

Without the core the price is 4,341 for just the supercharger:(

Complete kit with everything including pulleys and intercooler.
http://lsa-conversion-store.myshopif...ger-kit-625-hp

Ian SS · 08-30-2016, 06:20 PM

Quote:

Originally Posted by jessrayo

Complete kit with everything including pulleys and intercooler.
http://lsa-conversion-store.myshopif...ger-kit-625-hp

Wonder how power output and ceiling compare to a maggie. I know that little 1.7 can only do so much.

ender2664 · 08-30-2016, 06:30 PM

Quote:

Originally Posted by jessrayo

Complete kit with everything including pulleys and intercooler.
http://lsa-conversion-store.myshopif...ger-kit-625-hp

Thank you for the link.
That is pretty pricey compared to the procharger kit :(

jessrayo · 08-30-2016, 06:33 PM

Quote:

Originally Posted by slo_1ss

Wonder how power output and ceiling compare to a maggie. I know that little 1.7 can only do so much.

I kind of talk about this on post #27, page 2 of this thread. I think the 1.7 can put out as much as a stock LT1 motor can handle period. You need to change the rods and pistons to something with less compression to even get to the extra capacity of the Maggie.

baf2000 · 08-30-2016, 07:23 PM

Seem like the lt4 supercharger parts are 3379.92 + 300.00 core( http://www.gmpartsdirect.com/auto-pa...omponents-scat ) . So what else does the kit ( http://lsa-conversion-store.myshopif...ger-kit-625-hp ) really contain for 3200.00 more bucks ? Tempting to get the Z06 service manual for $130.00 and reverse engineer the install . Hummm...

08-27-2016, 03:52 AM	#31
Marine Corps Drives: 2016 2SS Garnet Red Camaro Join Date: Aug 2015 Location: San Francisco Bay Posts: 840	What about the ProCharger P1. It gives you about 160 additional HP and 7psi of boost. Can get a 3 year warranty for an additional $49. The price is also lower at about $5,700 plus installation. __________________ Ordered: 8/8/15, 2SS Garnet Red Built: 10/14/15 Current: Took Delivery, 12/24/15 Added Procharger supercharger.

08-28-2016, 11:19 AM	#33
Marine Corps Drives: 2016 2SS Garnet Red Camaro Join Date: Aug 2015 Location: San Francisco Bay Posts: 840	What about the Procharger P1 at 7psi? __________________ Ordered: 8/8/15, 2SS Garnet Red Built: 10/14/15 Current: Took Delivery, 12/24/15 Added Procharger supercharger.

08-28-2016, 08:41 PM	#34
JoeAyalaM Account Suspended Drives: Audi S6 V8TT, Volvos XC60 & S60R Join Date: Feb 2016 Location: 5000 ft above sea level. Posts: 414	Different animal, PDS and Centris don't work the same way. Go P1for drag, PD for DD, but you could really do either for anything, it depends on your liking of how they drive.

08-30-2016, 10:02 AM	#35
ender2664 Account Suspended Drives: 2016 2SS Join Date: Mar 2014 Location: Palm Desert Posts: 2,353	Link and or cost of an LT4 blower?

08-30-2016, 04:34 PM	#36
baf2000 Drives: 2016 1ss Join Date: Aug 2016 Location: nj Posts: 10	http://www.gmpartsdirect.com/auto-pa...omponents-scat

08-30-2016, 04:42 PM	#37
ender2664 Account Suspended Drives: 2016 2SS Join Date: Mar 2014 Location: Palm Desert Posts: 2,353	Without the core the price is 4,341 for just the supercharger:(

08-30-2016, 07:23 PM	#42
baf2000 Drives: 2016 1ss Join Date: Aug 2016 Location: nj Posts: 10	Seem like the lt4 supercharger parts are 3379.92 + 300.00 core( http://www.gmpartsdirect.com/auto-pa...omponents-scat ) . So what else does the kit ( http://lsa-conversion-store.myshopif...ger-kit-625-hp ) really contain for 3200.00 more bucks ? Tempting to get the Z06 service manual for $130.00 and reverse engineer the install . Hummm...

User Name		Remember Me?
Password