Homepage Garage Wiki Register Members List Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction Discussions


BeckyD @ James Martin Chevy


Post Reply
 
Thread Tools
Old 06-12-2019, 06:17 PM   #1
parish8

 
Drives: 17 SS a8
Join Date: Feb 2010
Location: omaha
Posts: 1,357
is it friday yet? going to the track to crank it up.

i am going to a private track rental on Friday, 1/8th mile. something like 15 of us. last trip to the track the car ran 5.94 at 18psi with a 1.44 60'

since then I got set up with a drag alignment for the rear, got some et street pro tires and put on a pair of drag shocks. I am also pulling about 120lbs of easy weight. I am hoping to get a 1.35 60' or better and if that goes well turn it up to as high as 25psi. 7 extra psi is around 200hp.

lots could go wrong but if things come together it could be a pretty good run. why isn't it Friday yet?
__________________
760 rwhp at 11psi, 6.48@113 1/8th mile, stock motor
1096 rwhp at 22psi, 5.94@122 1/8th(18psi), 9.19@155 1/4(20psi), drop in rods and pistons
Twins build http://www.camaro6.com/forums/showthread.php?t=465472
parish8 is offline   Reply With Quote
Old 06-12-2019, 08:17 PM   #2
DapperDan
 
DapperDan's Avatar
 
Drives: 2017 1SS A8 Nightfall Gray
Join Date: Feb 2017
Location: Maryland
Posts: 292
Good luck man! Get ready for lift off in that rocket ship. How about some info on the drag shocks Thanks
__________________
DapperDan is offline   Reply With Quote
Old 06-12-2019, 08:37 PM   #3
parish8

 
Drives: 17 SS a8
Join Date: Feb 2010
Location: omaha
Posts: 1,357
Quote:
Originally Posted by DapperDan View Post
Good luck man! Get ready for lift off in that rocket ship. How about some info on the drag shocks Thanks
Viking crusader double adjustable. Don’t know much about them other than other people seem to like them.
__________________
760 rwhp at 11psi, 6.48@113 1/8th mile, stock motor
1096 rwhp at 22psi, 5.94@122 1/8th(18psi), 9.19@155 1/4(20psi), drop in rods and pistons
Twins build http://www.camaro6.com/forums/showthread.php?t=465472
parish8 is offline   Reply With Quote
Old 06-12-2019, 10:06 PM   #4
laynlo15

 
laynlo15's Avatar
 
Drives: 2016 1ss A8, Npp
Join Date: Nov 2015
Location: clark, mo
Posts: 5,011
Are you going back to Topeka? I'm pretty sure you'll break the FI 1/8 and 1/4 mile record if you hook and book with no issues. Good luck
__________________
2016 1SS, Magnuson 2650 Heartbreaker. NW103, Kent's Hot Rod Garage(Hoosier/MT/Race Star),RPM RB
Big Gulp by Roto-Fab, Livernois, Manley, Lt4 Fueling, VP Race Fuel, Speed Engineering, Tuned by toohighpsi.
9.41@146 (best MPH 147) w/1.35 60ft 6.05@117 1/8 (best 1/8 MPH 118) Employee/Driver
laynlo15 is offline   Reply With Quote
Old 06-13-2019, 06:11 AM   #5
Jhunsberger
 
Jhunsberger's Avatar
 
Drives: 2017 Camaro 1SS M6
Join Date: Oct 2016
Location: 19518
Posts: 299
Good luck Parish8, let her eat! Cant wait to see the results, be safe man!
__________________
2017 1SS M6 Hyper Blue Metallic NPP, MMR 228 Z/28 replica wheels, Front: 20 x 9, Rear 20 x 11

Stock: 416hp/427tq, 12.21 @ 116.80

Modified 02/2019: Whipple SC w/ 3.500 pulley, LT4 fueling, NW 103 TB, Roto-Fab Big Gulp, Kooks 2" jet coated, full Borla ATAK exhaust, DSS axles, Gforce driveshaft.

Tuned by Complete Street Performance 653hp/618tq

Best 1/4 to date: 10.705 @ 131.92
Jhunsberger is offline   Reply With Quote
Old 06-14-2019, 06:34 AM   #6
laynlo15

 
laynlo15's Avatar
 
Drives: 2016 1ss A8, Npp
Join Date: Nov 2015
Location: clark, mo
Posts: 5,011
Alright Parish, turn the beast loose today. It should be crazy fast so hold on tight.
__________________
2016 1SS, Magnuson 2650 Heartbreaker. NW103, Kent's Hot Rod Garage(Hoosier/MT/Race Star),RPM RB
Big Gulp by Roto-Fab, Livernois, Manley, Lt4 Fueling, VP Race Fuel, Speed Engineering, Tuned by toohighpsi.
9.41@146 (best MPH 147) w/1.35 60ft 6.05@117 1/8 (best 1/8 MPH 118) Employee/Driver
laynlo15 is offline   Reply With Quote
Old 06-14-2019, 04:02 PM   #7
parish8

 
Drives: 17 SS a8
Join Date: Feb 2010
Location: omaha
Posts: 1,357
Fail. Best run was a 6.29@119 with a 1.60 60’. I was just starting to get it to hook and the alternator took a shit or something charging related. The that was at 16psi.
__________________
760 rwhp at 11psi, 6.48@113 1/8th mile, stock motor
1096 rwhp at 22psi, 5.94@122 1/8th(18psi), 9.19@155 1/4(20psi), drop in rods and pistons
Twins build http://www.camaro6.com/forums/showthread.php?t=465472
parish8 is offline   Reply With Quote
Old 06-14-2019, 05:30 PM   #8
laynlo15

 
laynlo15's Avatar
 
Drives: 2016 1ss A8, Npp
Join Date: Nov 2015
Location: clark, mo
Posts: 5,011
That sucks, too much electronics.
__________________
2016 1SS, Magnuson 2650 Heartbreaker. NW103, Kent's Hot Rod Garage(Hoosier/MT/Race Star),RPM RB
Big Gulp by Roto-Fab, Livernois, Manley, Lt4 Fueling, VP Race Fuel, Speed Engineering, Tuned by toohighpsi.
9.41@146 (best MPH 147) w/1.35 60ft 6.05@117 1/8 (best 1/8 MPH 118) Employee/Driver
laynlo15 is offline   Reply With Quote
Old 06-15-2019, 08:33 AM   #9
hitmix300
2016 loaded 2SS
 
hitmix300's Avatar
 
Drives: Maverick X3 Turbo R
Join Date: Feb 2015
Location: United States
Posts: 228
always something with these latemodel hotrods. could always b worse tho you know that..

I am hoping to see some 9.7's out of my car on the 17" wheel. here is a slip from two weeks ago. I didn't have any time to check the tire pressure or even brake boost, just left off idle. i cannot wait for some free time to spend the day at the track and figure this car out and what works, etc. fortunately the track seemed to hold 20psi tho


these turbo cars trap hard!

hitmix300 is offline   Reply With Quote
Old 06-15-2019, 10:06 AM   #10
parish8

 
Drives: 17 SS a8
Join Date: Feb 2010
Location: omaha
Posts: 1,357
Yeah the mph is nice. I wonder where my car will end up when I am able to crank the boost to 25psi if 16psi gets me 120mph in the 1/8th.
__________________
760 rwhp at 11psi, 6.48@113 1/8th mile, stock motor
1096 rwhp at 22psi, 5.94@122 1/8th(18psi), 9.19@155 1/4(20psi), drop in rods and pistons
Twins build http://www.camaro6.com/forums/showthread.php?t=465472
parish8 is offline   Reply With Quote
Old 06-15-2019, 12:59 PM   #11
hitmix300
2016 loaded 2SS
 
hitmix300's Avatar
 
Drives: Maverick X3 Turbo R
Join Date: Feb 2015
Location: United States
Posts: 228
Quote:
Originally Posted by parish8 View Post
Yeah the mph is nice. I wonder where my car will end up when I am able to crank the boost to 25psi if 16psi gets me 120mph in the 1/8th.
Hopefully your head gaskets will approve of that decision making.

knock on wood
hitmix300 is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:53 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.