New Camaro Dash kit - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Marty Z · 05-07-2019, 01:34 PM

So I have been planning an technology upgrade this summer, New head unit, Kenwood DDX9705S, front and rear view cameras, and as most people here, a PAC Dash Kit.

Well today I was just surfing the intranets and found this, apparently due for release tomorrow by idatalink.

https://maestro.idatalink.com/access...929/project/rr

They also, finally, have Maestro RR support for the Gen 5 that allows you to modify vehicle settings and have climate control on the head unit.

Looks like the PAC unit has finally found a challenger. I am hoping to see a few reviews on youtube before I make my purchase in a few months.

Edit: and on a side note, it looks a lot beeter then all the other dash kits out there. In my opinion

paulsandhu · 05-07-2019, 02:48 PM

I remember seeing something about this awhile ago. I would have to see it installed though before I pass final judgement.

Ponchonutty · 05-07-2019, 03:23 PM

I seen this at Knowledge Fest and it is freaking sweet! They are just starting to ship and I ordered a couple. I plan to try one our on my 12 SS
https://m.youtube.com/watch?v=g8uht20bNkA

bigtwan25 · 05-07-2019, 07:44 PM

thats nice

hammdo · 05-07-2019, 08:06 PM

Fixed it:

Another device that uses the obd2 port...

Unless it’s pass through, I can’t use it...

-Don

Marty Z · 05-07-2019, 09:49 PM

Reading the specs on the maestro site. If your HU supports it, it will allow you to read and clear codes.

I've seen OBDII splitters, not sure if they work though

Leo72793 · 05-07-2019, 10:21 PM

I just wish the design was better lol. Im waiting for PAC to announce the Elev8 for our caars, ive been talking to them regarding it

hammdo · 05-07-2019, 11:02 PM

Quote:

Originally Posted by Marty Z

Reading the specs on the maestro site. If your HU supports it, it will allow you to read and clear codes.

I've seen OBDII splitters, not sure if they work though

The problem with splitters is the communication is 'serial' and does not split well -- trust me, I've tried and its not 'pretty'.

I'm waiting to see if anything better comes. I have the Gen5 MyLink and outside of the nav, its been 'ok'. Nav is just -- well bad.

Not able to update is just crazy -- even for 2013 version (which I have).

When we get on that works well with the 'wheel' controls, I'll consider changing...

-Don

paulsandhu · 05-08-2019, 12:12 AM

Quote:

Originally Posted by Ponchonutty

I seen this at Knowledge Fest and it is freaking sweet! They are just starting to ship and I ordered a couple. I plan to try one our on my 12 SS
https://m.youtube.com/watch?v=g8uht20bNkA

wow, I gotta get this!

RenegadeXR · 05-08-2019, 03:03 PM

It's definitely nice to see another kit when the 5th gen Camaro has limited options, but I don't think it's better than the PAC unit. Nothing beats keeping the stock HVAC controls. In any car with physical and software controls, I will always go for physical.

Quote:

Originally Posted by Leo72793

I just wish the design was better lol. Im waiting for PAC to announce the Elev8 for our caars, ive been talking to them regarding it

Sounds interesting, but I'm having a hard time visualizing what that'd be. Sounds like a floating screen that rests above a single-DIN. Not sure how that would work out in our cars without blocking stuff, unless they make a totally custom head unit enclosure again. One of the slight trade-offs with the existing PAC RPK5-GM4101 units is they are a bit cramped and the head unit sits a bit low (this is realistically the only place it'd fit due to clearances), so if they had the screen float, it could sit further up in the console.

Marty Z · 05-08-2019, 05:29 PM

Even the original hvac controls are electronic even though they feel mechanical. Plus, if you look closely, you will see the top row of buttons has fan and rear defrost cotrols. What I don't like about the PAC unit is that you can't change vehicle settings without hooking up a laptop. What I hate about the 3 current options is the sunken look. As far as quality goes, I believe that maestro products have a pretty good track record.

Leo72793 · 05-08-2019, 05:53 PM

Quote:

Originally Posted by RenegadeXR

It's definitely nice to see another kit when the 5th gen Camaro has limited options, but I don't think it's better than the PAC unit. Nothing beats keeping the stock HVAC controls. In any car with physical and software controls, I will always go for physical.

Sounds interesting, but I'm having a hard time visualizing what that'd be. Sounds like a floating screen that rests above a single-DIN. Not sure how that would work out in our cars without blocking stuff, unless they make a totally custom head unit enclosure again. One of the slight trade-offs with the existing PAC RPK5-GM4101 units is they are a bit cramped and the head unit sits a bit low (this is realistically the only place it'd fit due to clearances), so if they had the screen float, it could sit further up in the console.

I had spoke to pac, they confirmed not a floating kit. Which is nice because the floating screen idea is garbage imho.

paulsandhu · 05-09-2019, 01:08 AM

Does anyone know the cost?

Marty Z · 05-09-2019, 08:04 AM

I just gave ADS a quick call. It will be released in the US by end of May. MSRP will be $249.99, plus the RR module. RR MSRP is $189.99 but most places sell it for 149.99. So at full MSRP we looking at $440. At retail, with coupon codes, maybe $350.

To me, if it's all as advertised, it's worth it.

05-07-2019, 01:34 PM	#1
Marty Z Drives: 2015 Bright Yellow 2LS Join Date: Apr 2019 Location: NJ Posts: 69	New Camaro Dash kit So I have been planning an technology upgrade this summer, New head unit, Kenwood DDX9705S, front and rear view cameras, and as most people here, a PAC Dash Kit. Well today I was just surfing the intranets and found this, apparently due for release tomorrow by idatalink. https://maestro.idatalink.com/access...929/project/rr They also, finally, have Maestro RR support for the Gen 5 that allows you to modify vehicle settings and have climate control on the head unit. Looks like the PAC unit has finally found a challenger. I am hoping to see a few reviews on youtube before I make my purchase in a few months. Edit: and on a side note, it looks a lot beeter then all the other dash kits out there. In my opinion

05-07-2019, 02:48 PM	#2
paulsandhu Drives: 2010 Camaro 2SS/RS Join Date: Apr 2009 Location: Surrey, BC Posts: 455 View My Garage	I remember seeing something about this awhile ago. I would have to see it installed though before I pass final judgement. __________________ GHOST · 2SSRS Order Date: March 28, 2009 // DoB: June 19, 2009 // Arrival Date: July 2, 2009 Current Modifications: Hurst Comp HardDrive Stick Kit K&N Blackhawk CAI Anvil Carbon Fiber Notch Spoiler Ceramic Coated Satin Black Wrap

05-07-2019, 03:23 PM	#3
Ponchonutty Drives: 2012 SS L99 Converible Join Date: Mar 2016 Location: New Washington, Ohio Posts: 606	I seen this at Knowledge Fest and it is freaking sweet! They are just starting to ship and I ordered a couple. I plan to try one our on my 12 SS https://m.youtube.com/watch?v=g8uht20bNkA __________________ 2012 L99 Convertible SS Tooley Racing Stage 2 DOD delete, 3,200 stall converter, Shorty headers and custom stainless exhaust, CAI, and tune as mods

05-07-2019, 10:21 PM	#7
Leo72793 Drives: 2011 2SS/RS Join Date: Feb 2016 Location: Jacksonville FL Posts: 1,191	I just wish the design was better lol. Im waiting for PAC to announce the Elev8 for our caars, ive been talking to them regarding it __________________ •2011 Camaro SS 2SS/RS A6 •MRR M017 1le Replica Wheels •Vararam Ram Air Intake •Speed Engineering Longtube Headers w/ Magnaflow HF Cats •Bo White PnP Stage 2 TB •GPI SS2 VVT Cam w Cometic thin gaskets 10.69 compression •Xpipe w/ Res Delete and NPP Exhaust •Tuned By Anonymous Calibrations •Gen5DIY Mylink Conversion W/ Backup Cam •Morel 3 way custom speakers, Infinity 860w Subwoofers in trunk baffle •Helix P6 6ch amp w/ 8ch DSP and P1 Sub amp

05-09-2019, 01:08 AM	#13
paulsandhu Drives: 2010 Camaro 2SS/RS Join Date: Apr 2009 Location: Surrey, BC Posts: 455 View My Garage	Does anyone know the cost? __________________ GHOST · 2SSRS Order Date: March 28, 2009 // DoB: June 19, 2009 // Arrival Date: July 2, 2009 Current Modifications: Hurst Comp HardDrive Stick Kit K&N Blackhawk CAI Anvil Carbon Fiber Notch Spoiler Ceramic Coated Satin Black Wrap

05-07-2019, 07:44 PM	#4
bigtwan25 Drives: 2011 SS Join Date: Jan 2018 Location: MARYLAND Posts: 75	thats nice

05-07-2019, 09:49 PM	#6
Marty Z Drives: 2015 Bright Yellow 2LS Join Date: Apr 2019 Location: NJ Posts: 69	Reading the specs on the maestro site. If your HU supports it, it will allow you to read and clear codes. I've seen OBDII splitters, not sure if they work though

05-08-2019, 05:29 PM	#11
Marty Z Drives: 2015 Bright Yellow 2LS Join Date: Apr 2019 Location: NJ Posts: 69	Even the original hvac controls are electronic even though they feel mechanical. Plus, if you look closely, you will see the top row of buttons has fan and rear defrost cotrols. What I don't like about the PAC unit is that you can't change vehicle settings without hooking up a laptop. What I hate about the 3 current options is the sunken look. As far as quality goes, I believe that maestro products have a pretty good track record.

05-09-2019, 08:04 AM	#14
Marty Z Drives: 2015 Bright Yellow 2LS Join Date: Apr 2019 Location: NJ Posts: 69	I just gave ADS a quick call. It will be released in the US by end of May. MSRP will be $249.99, plus the RR module. RR MSRP is $189.99 but most places sell it for 149.99. So at full MSRP we looking at $440. At retail, with coupon codes, maybe $350. To me, if it's all as advertised, it's worth it.