Off with the old - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

TM1LE · 07-29-2015, 12:45 PM

Just removed the stock system last night. It took longer to get the car up on blocks than remove the entire system! Hopefully re-assembly is just as simple when the new Borla Atak system arrives.

DesertCamaro · 07-29-2015, 03:37 PM

Just drive it like that for awhile!

Ace0751 · 07-29-2015, 03:42 PM

look at all those power restrictions, doesn't it hurt to see that.

GONIF · 07-29-2015, 04:57 PM

Looks like mine that is now stored in the 3rd bay garage. Oddly enough it looks restrictive ,but wasn't. But it was far too quiet even with long tubes and HF cats . Went with a SP 1 7/8 long tubes with HF cats MBRP 3 inch and it now it sounds outstanding . Not too loud and not too quiet ,just right.

USAFS197 · 07-29-2015, 06:10 PM

Other than the trash cans, which is pretty subjective, it doesn't look restrictive at all. At least it's not the L99 one with the huge resonator in the middle.

blackoutVIII · 07-30-2015, 12:39 PM

so what if those resonators and dents by the h-pipe are removed and replaced with straight pipe? I have thought of this since I have the GM performance off road axle back on mine.

07-29-2015, 12:45 PM	#1
TM1LE Drives: 2015 Camaro 1SS/1LE Join Date: Jul 2015 Location: Finger Lakes, NY Posts: 14	Off with the old Just removed the stock system last night. It took longer to get the car up on blocks than remove the entire system! Hopefully re-assembly is just as simple when the new Borla Atak system arrives. Attached Images

07-29-2015, 03:37 PM	#2
DesertCamaro Drives: Fast Join Date: Mar 2011 Location: Phoenix, AZ Posts: 785	Just drive it like that for awhile! __________________ 2014 SS

07-29-2015, 03:42 PM	#3
Ace0751 GEN5 Detail Drives: 2011 Synergy Series 2SS Convertible Join Date: Sep 2014 Location: Northeast, OH Posts: 1,986	look at all those power restrictions, doesn't it hurt to see that. __________________ Roto-Fab CAI, Borla ATAK Exhaust System, Stainless Power Headers, RX Performance Catch Can, ACS T4 Splitter, Oracle side markers, Dyno Tuned by RDP Motorsports

07-29-2015, 04:57 PM	#4
GONIF Drives: 73 VETTE ,, 05 2500hd diesel,14 1LE Join Date: Feb 2014 Location: The Left lane PHOENIX AZ Posts: 2,626	Looks like mine that is now stored in the 3rd bay garage. Oddly enough it looks restrictive ,but wasn't. But it was far too quiet even with long tubes and HF cats . Went with a SP 1 7/8 long tubes with HF cats MBRP 3 inch and it now it sounds outstanding . Not too loud and not too quiet ,just right. __________________ OLD GUY FLYING FAST AND LOW

07-29-2015, 06:10 PM	#5
USAFS197 Drives: 2018 Audi TT RS Join Date: Jan 2014 Location: Navarre, Florida Posts: 1,915	Other than the trash cans, which is pretty subjective, it doesn't look restrictive at all. At least it's not the L99 one with the huge resonator in the middle. __________________ 2018 Audi TT ▊RS 2.4X 0-60, 1.6X 60', 120+mph 1/8th, 4.XX 60-130, 150+mph traps on 255/35/18 R888R tires on the street (unprepped). 2019 Audi RS3 About as fast as the TT RS 2019 Camaro ZL1 1LE Sold 2018 Camaro SS 1LE Sold 2019 Corvette Z06 Sold 2021 Charger Hellcat Redeye Widebody Sold

07-30-2015, 12:39 PM	#6
blackoutVIII Drives: 2011 2SS w/RS PKG Join Date: Sep 2010 Location: Hawaii Posts: 140	so what if those resonators and dents by the h-pipe are removed and replaced with straight pipe? I have thought of this since I have the GM performance off road axle back on mine.