07-26-2018, 05:55 PM | #85 |
Drives: 2018 ZL1 A10/2018 GT350R #JR603 Join Date: Jan 2017
Location: Dublin CA
Posts: 819
|
I sent you an email last week, I am considering the Carbon Fiber front rotors w/ 2 piece iron disk. Any sales possibly on that package? #30+ pound savings of rotating mass & the sinister sexy look of a composite front rotor. R/B (2) piece iron black rotor is one of the best looking rotors I have seen.
The full CC is 50 pounds savings of rotating mass.
__________________
2018GT350R+2018 ZL1 "Red Hot" A10 w/ PDR, Nav, Carbon Fiber Hood insert, Carbon Fiber Dash Insert, Carbon Fiber Fuel Dior & Sun Roof. T/M T-Body, Roto Fab & Borla S Type.
|
07-27-2018, 07:24 AM | #86 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Since the zl1 caliper is the same as the 5th gen Z28 will those carbon disc bolt right up?
and for the rear what would be what mods are needed to make the Z28 brakes work?
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
07-27-2018, 07:32 AM | #87 |
Drives: 20 X3M CP & 19 ZL1 1LE A10 Join Date: Jun 2013
Location: Brenham, TX
Posts: 3,517
|
Why isn’t this a factory OPTION is something Ruess or Al might never answer.
__________________
🔺22 RS E TRON GT
🔺21 Model S Plaid |
07-27-2018, 08:02 AM | #88 |
Who Needs to KNOW?
Drives: 18 ZLE Join Date: May 2018
Location: Left Side of the Moon
Posts: 1,770
|
Front rotor only option for ZL1 1LE?
__________________
ing for grip.
Are you in the NY/NJ/PA/CT region? Join us for autox fun at MetLife Stadium. HUGE lots, tons of runs. http://www.motorsportsne.com/ |
08-22-2018, 09:23 AM | #89 |
Drives: Camaro Join Date: Apr 2010
Location: Fullerton, CA
Posts: 78
|
https://www.racingbrake.com/RB-Front...Cam-p/2c85.htm These CCM rotors are made for direct replacement and fit under OE calipers. They are now being built with premium continuous carbon fiber which is a denser and stronger construction and material than Brembo's chopped fiber. See our tech presentation on rennlist here: https://rennlist.com/forums/showpost...0&postcount=16 By Design: Traditional Straight Vane Design (Brembo & ST): Rotor are non-directional (Left and right are the same, less efficient in cooling) RB's Angle Vane Design: Rotors are directional (More efficient in cooling air circulation and can keep braking temperature lower) By Material & Finish: Brembo Surface Transforms RB |
08-22-2018, 09:26 AM | #90 |
Drives: Camaro Join Date: Apr 2010
Location: Fullerton, CA
Posts: 78
|
World's first RB CCM rotor kit built with continuous fiber replacing Russ' Z28 OE rotors:
|
12-09-2019, 02:00 PM | #91 |
Drives: Camaro Join Date: Apr 2010
Location: Fullerton, CA
Posts: 78
|
Complete OE Caliper Rebuild Kit for G5 & G6
Matrix has recently been updated:
https://www.racingbrake.com/category-s/7383.htm G6 SS calipers are same as Corvette C7 Z51 that have external boot fitment which requires different style of pistons other than boots. Both boots (Std and HT blue boots) and pistons are being made available with a 2-4 weeks leadtime. |
12-09-2019, 02:33 PM | #92 |
Drives: 2018 Hyper Blue ZL1 1LE Join Date: Dec 2018
Location: CA
Posts: 1,360
|
IMO Carbon brakes are not worth the risk and cost of an overheated/failed carbon disk. If you're super wealthy, sure no problem. Burn up your CC brakes on a heavy track day, have your assistant take the car in for another set. Chump change :-)
But for most of us the cost is really high and the stock iron disks are amazing already. Brakes are not a weak point on the ZL1, they're a strength. |
12-10-2019, 06:33 AM | #93 | |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Quote:
How much for disc hat?
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
|
12-10-2019, 08:07 AM | #94 | |
Drives: 2018 ZL1 1LE Join Date: May 2019
Location: South Florida
Posts: 438
|
Quote:
__________________
Subscribe to my Youtube channel!
https://www.youtube.com/c/Junkyardspecial Will buy your GoodYear Supercar 3R Take offs! |
|
12-10-2019, 08:48 AM | #95 | |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Quote:
So go a place like this.. https://wantian.en.alibaba.com/ give them the dimensions of the rotor from page 1 like 394x36mm along with the other specs.. and you will have a rotor cheaper option.
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
|
12-10-2019, 09:28 AM | #96 |
Drives: 1LEs Join Date: May 2009
Location: DFW - Texas
Posts: 1,319
|
How often are you replacing the front rotors? New ZL1 fronts are only $411.83 at Amazon (177-1247 Delco / 84271643 GM). For the price point and performance of the car and the brake components, especially compared to OEM Porsche, etc. prices, we have it very good.
|
12-10-2019, 12:09 PM | #97 | |
Drives: 2018 ZL1 1LE Join Date: May 2019
Location: South Florida
Posts: 438
|
Quote:
__________________
Subscribe to my Youtube channel!
https://www.youtube.com/c/Junkyardspecial Will buy your GoodYear Supercar 3R Take offs! |
|
12-10-2019, 02:15 PM | #98 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
I can see you never have owned your own businesses
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
|
|
Post Reply
|
|
|