06-10-2019, 01:31 PM | #1 |
Account Suspended
Drives: 2016 Camaro 2SS HBM Join Date: May 2015
Location: Long Island New York
Posts: 98
|
SW Axleback with Hooker Blackheart Mid Pipes?
I purchased a Stainless Works 3" performance connect axle back from someone here on the forums. I currently have the axle back mounted up in the car using adapters that convert the 2.75" factory exhaust into the 3" OD pipe needed to go into the axle back. I was looking into my next step of my exhaust and I'd like to convert it to an entire cutback system to get rid of the ugly factory mid pipes. I have been searching around and found the Hooker Blackheart mid pipes (https://www.speedwaymotors.com/Hooke...SS,287574.html). Can anyone confirm that this set up will work on my otherwise stock car? Any help is greatly appreciated.
2016 2SS Manual |
06-10-2019, 01:32 PM | #2 |
Account Suspended
Drives: 2016 Camaro 2SS HBM Join Date: May 2015
Location: Long Island New York
Posts: 98
|
Any alternative opinions are also welcome. Thanks again
|
|
|
Post Reply
|
|
|