Vortech v3 supercharger FS/FT - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

kIng_kOng · 01-02-2020, 10:28 AM

Wanting to sell or trade my complete vortech v3 10 rib supercharger kit with around 8k miles on it. The only trade is for a nice turbo set up. This kit will come complete with balancer, brackets, head unit, piping, inter cooler, bov, and injectors. Right now it is puppies for 7-8 pounds and made 600 on my stock motor. If needed we can talk about including my long tube headers and full exhaust. $3500.00.

I’m located in Columbus Ohio. Shipping is an option but T your expense. I am willing to drive a few to meet.

b4wheeler · 01-02-2020, 11:06 AM

What else is need to complete the install..... Vortech lists this kit at $8,200....

And do you have any other supporting mods, like cam shaft????

kIng_kOng · 01-02-2020, 12:05 PM

Quote:

Originally Posted by b4wheeler

What else is need to complete the install..... Vortech lists this kit at $8,200....

And do you have any other supporting mods, like cam shaft????

everything needed to install and run on a 5th gen will be sold with it. ill glady accept morethen the 3500!!!

As the ad stated I used this kit on my stock motor car. So I don't have a cam shaft to go with it nor is a after market cam needed with this.

SikkkSS · 01-04-2020, 12:06 PM

PM Sent

kIng_kOng · 01-05-2020, 01:34 PM

PM’s replies to

b4wheeler · 01-07-2020, 07:54 AM

Still drooling

,but wifey says No!

kIng_kOng · 01-07-2020, 09:33 AM

Quote:

Originally Posted by b4wheeler

Still drooling

,but wifey says No!

forgiveness is easier to get then permission!

b4wheeler · 01-07-2020, 11:27 AM

Very true. But I drive up there, the door may be locked when I get home.��

b4wheeler · 01-08-2020, 09:25 AM

Funny thing, she says "she" is not keeping me from getting it, Money is........

Sounds like permission to me.....

Now to steal the money from somewhere.

kIng_kOng · 01-09-2020, 08:41 AM

Quote:

Originally Posted by b4wheeler

Funny thing, she says "she" is not keeping me from getting it, Money is........

Sounds like permission to me.....

Now to steal the money from somewhere.

TheFlyingBananaSS · 01-10-2020, 05:46 AM

If you still have it next month, I may just go deep in the pockets.

Is this for an L99 or LS3 engine?

kIng_kOng · 01-10-2020, 09:43 AM

Quote:

Originally Posted by TheFlyingBananaSS

If you still have it next month, I may just go deep in the pockets.

Is this for an L99 or LS3 engine?

ls3

b4wheeler · 01-10-2020, 09:59 AM

is this currently installed or was it off of your old car?

Tajefe Couple · 01-10-2020, 07:03 PM

Quote:

Originally Posted by TheFlyingBananaSS

If you still have it next month, I may just go deep in the pockets.

Is this for an L99 or LS3 engine?

Curious whats the difference in the kits for the LS3 vs L99? I know whats different about the engines but thought the V3 supercharger kit was the same for both applications.

01-02-2020, 10:28 AM	#1
kIng_kOng Drives: 2010 IOSS Join Date: Dec 2016 Location: Ohio Posts: 64	Vortech v3 supercharger FS/FT Wanting to sell or trade my complete vortech v3 10 rib supercharger kit with around 8k miles on it. The only trade is for a nice turbo set up. This kit will come complete with balancer, brackets, head unit, piping, inter cooler, bov, and injectors. Right now it is puppies for 7-8 pounds and made 600 on my stock motor. If needed we can talk about including my long tube headers and full exhaust. $3500.00. I’m located in Columbus Ohio. Shipping is an option but T your expense. I am willing to drive a few to meet. Attached Images Last edited by kIng_kOng; 01-02-2020 at 12:06 PM.

01-02-2020, 11:06 AM	#2
b4wheeler Drives: 2011 Camaro 2SS Vert Join Date: Oct 2015 Location: Cordova, Md Posts: 590 View My Garage	What else is need to complete the install..... Vortech lists this kit at $8,200.... And do you have any other supporting mods, like cam shaft???? __________________ 2011 2SS/RS Convertible, Victory Red, Roto-Fab CAI, Stainless Power 1 7/8 headers, No Cats, Straight piped, Bo White TB, ZL1 CONVERSION, CDC Roll bar and some powder coating and dipping.

01-07-2020, 07:54 AM	#6
b4wheeler Drives: 2011 Camaro 2SS Vert Join Date: Oct 2015 Location: Cordova, Md Posts: 590 View My Garage	Still drooling ,but wifey says No! __________________ 2011 2SS/RS Convertible, Victory Red, Roto-Fab CAI, Stainless Power 1 7/8 headers, No Cats, Straight piped, Bo White TB, ZL1 CONVERSION, CDC Roll bar and some powder coating and dipping.

01-07-2020, 11:27 AM	#8
b4wheeler Drives: 2011 Camaro 2SS Vert Join Date: Oct 2015 Location: Cordova, Md Posts: 590 View My Garage	Very true. But I drive up there, the door may be locked when I get home.�� __________________ 2011 2SS/RS Convertible, Victory Red, Roto-Fab CAI, Stainless Power 1 7/8 headers, No Cats, Straight piped, Bo White TB, ZL1 CONVERSION, CDC Roll bar and some powder coating and dipping.

01-08-2020, 09:25 AM	#9
b4wheeler Drives: 2011 Camaro 2SS Vert Join Date: Oct 2015 Location: Cordova, Md Posts: 590 View My Garage	Funny thing, she says "she" is not keeping me from getting it, Money is........ Sounds like permission to me..... Now to steal the money from somewhere. __________________ 2011 2SS/RS Convertible, Victory Red, Roto-Fab CAI, Stainless Power 1 7/8 headers, No Cats, Straight piped, Bo White TB, ZL1 CONVERSION, CDC Roll bar and some powder coating and dipping.

01-04-2020, 12:06 PM	#4
SikkkSS Drives: 2015 Camaro SS Join Date: Oct 2019 Location: WV Posts: 5	PM Sent

01-05-2020, 01:34 PM	#5
kIng_kOng Drives: 2010 IOSS Join Date: Dec 2016 Location: Ohio Posts: 64	PM’s replies to

01-10-2020, 05:46 AM	#11
TheFlyingBananaSS Evil Genius of Chevrolet Drives: 2017 Z06, 2019 XTS, 2013 SS Join Date: Feb 2017 Location: New York Posts: 3,260	If you still have it next month, I may just go deep in the pockets. Is this for an L99 or LS3 engine? __________________ GPI SS2 VVT cam, ECS Novi 1500 supercharger, Corsa Extreme, Detroit Speed and BMR suspension, Circle D triple disc, Melling oil pump, LS2 chain tensioner, ATI 10% UD, DSX E85 kit, High Energy coils, BTR springs, LS2 Lifter trays, Titanium retainers, hardened push rods, FIC 1000 injectors, ZL1 pump, Mighty Mouse catch can, AEM gauges, Tial BOV, Richmond 3.91 gears, Custom gauge bezels, Speed Engineering headers, Stainless Works HF cats, DSX Aux pump, 710rwhp on E85.

01-10-2020, 09:59 AM	#13
b4wheeler Drives: 2011 Camaro 2SS Vert Join Date: Oct 2015 Location: Cordova, Md Posts: 590 View My Garage	is this currently installed or was it off of your old car? __________________ 2011 2SS/RS Convertible, Victory Red, Roto-Fab CAI, Stainless Power 1 7/8 headers, No Cats, Straight piped, Bo White TB, ZL1 CONVERSION, CDC Roll bar and some powder coating and dipping.