12-21-2023, 03:34 PM | #1 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
ZL1 1LE high wing farewell !
Here is the company that made the wing and other parts I believe they have some caddi and c8 contracts to.
SMI composites
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
12-21-2023, 03:59 PM | #2 |
Drives: 21 SHOCK ZL1 M6 Join Date: Sep 2023
Location: Indy
Posts: 88
|
Probably a good idea since they started charging 5k for it...bet they don't sell any except to Chevy...now that production is over I'd say they won't sell any....
|
12-21-2023, 04:04 PM | #3 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,623
|
How will someone whose wing is damaged get a replacement now? WIll this part still be manufactured to order, or it's the current leftover stock and once that is gone, people are out of luck and have to resort to a third party to produce a similar wing?
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
12-21-2023, 05:27 PM | #4 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
I would think you could order direct after patients are gone. The trifiber wing is identical other than stanchions being carbon fiber vs black plastic. I gave them my wing when I sold my zl1, most companies use 3d scanning on the car but, they don't see how to mount the wing or how the stanchions are made. So that's an option and better fit than aftermarket.
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
12-22-2023, 07:49 AM | #5 | |
Drives: 19' ZL1 A10, w/pdr Join Date: Sep 2014
Location: S.W. ohio
Posts: 1,555
|
Quote:
__________________
BTR Stg II cam w/ 38% fuel lobe, ARH 2" headers into 3" w/cats, AWE Touring, Kong X port, Weapon X triple ht exchangers, NW 103, Rotofab big gulp, DSX lowside, TCM tune, BMR Lockout, Mustang dyno 720 rwhp, 634 rwtq on 93 pump.
|
|
12-22-2023, 10:08 AM | #6 |
Drives: ZL1/1LE parts added Join Date: May 2018
Location: Somewhere around Texas pines tress and smooth asphalt
Posts: 609
|
The viper ACR, and ZL1/1LE changed the performance arena on street driven vehicles aerodynamics.
|
12-22-2023, 02:33 PM | #7 |
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,345
|
Thanks for asking, started w c8 in Feb it was ok, good styling and pretty dang quick to 60. It was lacking in the upper mph and hp. Traded the stingray for a z06 c8 It's pretty amazing the grip is incredible and it's pretty dang fast on the highways. I've added the twin ported TB by soler, I have the high flow cats in the garage that phastek will install just after the 1st. Hopefully the venturi or JLT CAI will be ready with in 2 or 3 weeks.
The Car dyno'd 642 RWHP I'd like to be about 685 with the TBs, Cats, intake, and titanium exhaust that 50lbs lighter. If this car was 3100 lbs it be even more unbelievable.
__________________
Kong Ported 2650, Crawford Racing Port Injection, Weapon X 112mm Adapter, NW112mm TB, Livernois Ported LT4 Heads, Lingenfelter GT32 stealth cam, Haltech Elite, and Carbon by Trufiber |
|
|
Post Reply
|
|
|